I cannot print to my Canon iR C2880i after Mavericks update

I am no longer able to print to the office Canon iR C2880i after I updated to Mavericks.  I am able to ping the printer using Network Utility.  It says my driver version is 1.0. I know it needs to be something else, but I cannot figure it out.  Please help.

nathan.gumbiner wrote:
It says my driver version is 1.0.
This would suggest you are using the Generic Postscript driver included with Mavericks. If your iR C2880 does not have the optional Postscript printer kit installed then it will not print. So download and install the UFR2 v10.3.0 driver.
Note that when you create the printer, ensure you select either the Line Printer Daemon-LPD or HP Jetdirect-Socket protocols. IPP is not supported by the either the Canon PS or UFR2 driver.

Similar Messages

  • I am not able to print in cannon ir series 2520 after Maverick update

    I am not able to print in cannon ir series 2520 after Maverick update, printer is in pause and even after resuming it it dosent work. Pl help
    Same case with the projector not able to connect it.

    The driver link you have provided will work. But we have found that if the previous driver is installed on the Mac, the user selects this older driver PPD when adding the printer instead of the new driver PPD because it has UFR in the name, which the new v10.2 driver does not.
    So as mentioned this new version UFR2 v10.2.1 includes an uninstaller to remove the old driver and PPDs, thus reducing the chance of the user making a mistake when adding the printer. The next issue is then getting them to select the correct protocol.
    I expect that Canon USA will update their site over the weekend to provide this latest version of the driver. Canon Oz gets its drivers direct from Canon INC so that's why we are a little bit earlier with some updates.

  • Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop

    Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop
    Please help

    It is a folder which I have created. Name is "SAP".
    I copied some of my office stuff and then deleted the contents inside the folder. But I couldnt delete the folder SAP.
    This is happening after the Mavericks update.

  • I cannot print on my Canon MF-4350d after upgrading to Mountain Lion.

    I previously had Snow Leopard and printed on my Canon MF-4350d with no issues.  After Mountain Lion was installed, I get an error message "Failed to read module.  Re-install.: 20600"  I went to the Canon website and downloaded the most current driver and reinstalled.  It still doesn't work.  Is there away to delete the printer info so I can try a clean install?  Any help would be greatly appreciated.
    -Walt

    In System Preferences -> Print & Scan, right-click onto a printer, then click Reset Printing System. Upon confirming your printers and scanners will be removed and you can start from scratch installing them. But before doing so, please note:
    Canon printer drivers usually come with the OS and are updated via Software Update. Try that. If no update is available, you can download the latest Canon driver set here.

  • I cannot print on my Canon i550 printer with the used Win7 computer I just bought. I downloaded a dr

    I cannot print on my Canon i550 printer with the used Win7 computer I just bought. I downloaded a driver update from Canon that is supposed to fix the incompatibility issue, but it does nothing. Can anyone help? Can't afford a new computer or printer!

    Hi cjvandeveer, The Windows 7 operating system has a mini-driver built-in for the printer. You can plug in the USB cable of printer into the computer and then turn the printer on. If Windows 7 automatically recognizes the printer, it will appear in your DEVICES AND PRINTERS window, and you will be able to print. You will then need to download the Windows 7 printer driver add-on module from our website. The add-on module will give the printer its full capability, but only after the printer is already recognized by Windows 7. First, to see if Windows recognizes your printer, please follow these steps: 1. Plug in the printer's USB cable into the computer and then turn on the printer. 2. Go to your START MENU on the computer and select DEVICES AND PRINTERS. 3. See if your printer is located in the DEVICES AND PRINTERS window. If it is not, we may need to run Windows Update on your computer in order for the printer to be initially recognized. Please follow these steps to install the latest driver for your printer from Windows Update: 1. Turn the printer on and ensure it is connected to the computer with the USB cable. Please note that your computer will also need to be connected to the internet before performing the next step. 2. Click on your START menu button, and in the text box that appears, type in 'WINDOWS UPDATE', then click on START SEARCH. The Windows Update window should open. 3. Click on the 'SEARCH FOR UPDATES' or 'CHECK FOR UPDATES' link. The computer will search for updates and then display the updates it has found relevant to your operating system and devices connected to it. 4. View the CRITICAL UPDATES and OPTIONAL UPDATES that appear; if you see an update for your printer, select that one and then install it. 5. Once the driver is installed, please restart your computer. Once Windows 7 recognizes your printer, you can then install the printer add-on module from our website to give the printer its full functionality.  Hope this helps! This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.

  • HT1386 My (iTunes) playlist cannot be re-synched to my iPhone after I updated it.  I synched it to a newly named playlist with most of the original songs (3.6G) but it will only load a fraction of them now.  How can I get them all back on my iPhone.

    My (iTunes) playlist cannot be re-synched to my iPhone after I updated it.  I synched it to a newly named playlist with most of the original songs (3.6G) but it will only load a fraction of them now.  How can I get them all back on my iPhone?

    My (iTunes) playlist cannot be re-synched to my iPhone after I updated it.  I synched it to a newly named playlist with most of the original songs (3.6G) but it will only load a fraction of them now.  How can I get them all back on my iPhone?

  • HT4759 I can not install app's from the app store on my phone,and when i try, i get a message tells me (cannot connect to itunes store) that happened after i updated it to "IOS6" . it's a "IPhone4 S"

    I can not install app's from the app store on my phone,and when i try, i get a message tells me (cannot connect to itunes store) that happened after i updated it to "IOS6" . it's a "IPhone4 S"

    Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it.  So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
    Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID).  If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections.

  • Cannot print to Canon iR3380i after Mavericks update

    We have a small office network.  All machines print to our Canon iR3380i copier.  The iR3380i has a static IP address in our internal network.  All machines currently use OS X Lion.
    I updated my machine (2011 MacBook Air 13") to OS X Mavericks last night and can no longer print.  Here are the error messages and steps I've taken:
    1) First I got "Error 16801"
    To solve this I visited the Canon site to download the latest UFRII driver (v10.2.0) for the iR3380i
    I removed the current printer, updated my driver with the new UFRII driver
    I re-added the printer
    2) Next I got "The printed output may be incorrect because the printer information has not been acquired. Start Printer Utility to get the printer information."
    The only option at this point is to hit "OK".
    3) Next dialog box says "Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again, then start Printer Utility to get the printer information."
    Again, the only option I got was to hit "OK".
    The printer icon appears in the Dock with a PAUSE symbol and the 1 Job Pending alert.
    Opening the Printer Queue box shows one job in the queue.
    Hitting "Resume" generates the dialog box "Cannot communicate..." again.
    And that's it. I cannot figure out what else to do. Help please!

    PAHU wrote:
    I think your issue is that even though you have the latest 10.2.0 driver for 10.9, you added the printer using the previous v2.43 PPD. So open Print & Scan, remove the current printer for the iRC3380 and click the plus button to add again. After selecting IP > LPD and entering the IP address, ensure you select "Canon iR C2880/C3380" in the Use menu. Note that there is no mention of UFRII in the model name, as is the case with the previous UFR2 v2.43 driver.
    Thanks for the suggestion.  I did that this morning (see Step 1) and deleted the existing printer before re-adding a new printer and using the newly updated driver and printer description.  Here's what I get:
    You can see my model number is listed in there as is the the proprietary Canon UFRII language.
    Once added, here's what happens next:
    So it would appear, at this point, that the printer is installed and communicating and that I should be good to print.
    Alas, I get the same error message I've been getting.  back to square one.

  • Elements 10 for MAC cannot print 8x10 on Canon mp970?

    Elements 10 for MAC cannot print 8x10 photos on a Canon MP970 printer . I get a box that says can only print at 220 resolution. What should I do?

    That's not quite what it's saying. It's tell you that at the physical size you chose (presumably 8 x10) your photo has fewer than 220 pixels per inch. So you can print 8 x 10 but the quality may not be first rate, since the original image just doesn't have enough pixels in it to print at that size with more pixel density.

  • Cannot print PDF's from brother HL2140 after last 10.05.8 update.

    ok so, after fighting with apple about various final cut issues, I have thus far refused to 'upgrade' and I use that term very loosely, to snow leopard. I was reminded to update a few days ago-and now cannot print from my brother HL2140. I have NEVER had problems with this printer-ever. In fact I have a second one at my office with a macbook-and they work fine.
    Whatever was in this new 'update' has completely screwed up something! I have downloaded new drivers again and again. I have installed and reinstalled the printer and even tried printing with generic drivers. Nothing is working.
    The printer is detected by the mac, but it refuses to print. It doesn't even pretend it's gonna print, just awkward silence while we look at each other.
    Can anyone suggest anything?

    Dude, after the last apple upgrade I cant open half my programs. (almost everything that isnt apple wont work!!!) and it wont even let me send a crash report!!! Way to go apple for screwing everyone!!!

  • Cannot print on my officejet pro 8600 after upgrading to OS X Yosemite

    Since upgrading my Macbook Air to OS X Yosemite, I cannot print on my officejet pro 8600. I've tried reinstalling the driver and re-setting the printer.. nothing seems to work.. Any help?

    Hello Yaraat,
    It may help to reset the printing system on your Mac, then readd your printer.
    Mac OS X: How to reset the printing system
    http://support.apple.com/en-us/HT1341
    Cheers,
    Allen

  • Cannot print on EPSON Stylus Photo R230 after my Yosemite update OXSUpdcombo 10.10.3.dmg

    After I Updating our iMac 21.5”  i5, Mac Pro 13” i5 and 15” i7 ( Retina ) with OXSUpdcombo10.10.3, we cannot print on my Epson,  connection via USB, Printer Driver still there, I try to un install and reinstall with driver EPSONPrinterDriver3.0.dmg ,  but it still don’t work.
    But Our Mac Pro 13" i7 don't up date OXSUpdcombo still can print with Epson, although through Wifi
    Apple Family

    Hi
    1. Click on the Apple logo at the top left corner of the screen and select System Preferences.
    2. Click on Printers and Scanners pane.
    3. You need to highlight your printer on the left hand side and remove it from the list by clicking on little "-" button
    4. Click on little "+" button and add it back.
    You may also try to reset printer settings

  • Cannot mount any firewire/USB external drive after software update 10.5.4

    After the last software update on 10.5.4 it did not complete the installation, and get stuck at the last step of running installation script for hours. So I have to restart the computer, and it restarted fine. Then I use Disk Utility to check my hard disk, and discovered some file system inconsistency error, so I repaired it (in target disk mode by another Mac). After it is repaired, the file system passed with no error.
    But ever since then, I cannot mount any external firewire drive or USB drive. I cannot use Time Machine to backup my disk. I think my firewire and USB ports are fine because I can restart my iMac in target mode and connect to my MacBook via firewire, so the hardwire ports are functional, except that it seems 10.5.4 cannot detect or mount any external drive after the failed software update.
    Does anyone encounter similar problem? How can I fix it? I have my disk backed up by TimeMachine but I cannot restore it if it won't let me mount my TimeMachine disk. Is there any other way other than completely reinstall 10.5 from scratch?

    first, you should try reinstalling 10.5.4. download the [combo update|http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1054com boupdate.html] and run it. If that doesn't fix the issue, you can use full system restore from TM to go back to a time before the troubles started. to do that boot from the leopard install dvd, once past the language screen go to the Utilities menu at the top and choose "restore from backup".

  • Import failed with canon 6d footage after latest update

    After I updated to Final Cut X 10.0.8, I've been getting "Import Failed" messages during the import process when taking in footage from my Canon 6D
    The import process also seems to be going very slow (slower than usual)
    I've tried duplicating the SD card locally on the hard drive and re-importing, but have gotten the same results.
    If I click OK on the error dialogue box, the import will continue. but another box will pop up every 5 to 10 minutes or so
    Any ideas?

    Hey Russ, it actually works fine for me too the few times I've used it but I point it out as a common denominator with people who have trouble importing that way. Separating the .mov files into their own folder eliminates the camera and card reader, both much slower than just transfering files from a connected drive. But I'm doing newspaper video with Canon DSLRs - including 5D3 video, similar to 6D - almost daily where speed is of the essence and this is by far the most foolproof method I've come across.

  • Cannot access i cloud nor app store since mavericks update

    Since mavericks update I cannot access i cloud nor the app store

    Hi GouldR,
    Thanks for visiting Apple Support Communities.
    If you are having trouble logging into your iCloud account, the steps in this article may help:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    If the issue persists, feel free to reply with more infomation about any error messages you receive when trying to log in.
    Regards,
    Jeremy

Maybe you are looking for