I cannot reactivate my phone after changing the SIM as my apple ID is not recognised on the phone?

I am chaning carrier and have changed my sim but I cannot activate my phone as the apple id the phone was originally registered with no longer exists (or the email). I had registered my iphone to a new apple id, but this is not activating the phone. Please help!

natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here.

Similar Messages

Dear all, why can't i reactivate my iphone after changing the ios

Dear all,
I've upgraded my ios, and since the I'm not able to restart my Iphone. The message is " we are not able to reactivate your I phone, please restart later"
Please i need a help, I don't know what to do,
Billy

Insert a SIM card from the carrier the phone is locked to.
Next time, if you need your phone unlocked, do it legally, through the carrier.

I do not know what I should phone is locked after changing the operating system

I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

How can I re-activate eBooks in Adobe Digital Editions after changing the mother board of my MacBookPro?

After changing the mother board of my MacBookPro to fix the video display issue, all my previous eBooks in Adobe Digital Editions cannot be activated. The error message: "Activation Server error - code E_ADEPT_INTERNAL". Please advise what I can do to read my eBooks again?

Hmm, it shouldn't be that much of a problem. I searched my entire drive for "digital editions", and this is the whole thing:
/Applications/Adobe Digital Editions 3.0.app
/Users/user/Library/Caches/com.adobe.adobedigitaleditions.app
/Users/user/Documents/Digital Editions
/Users/user/Library/Preferences/com.adobe.adobedigitaleditions.app.plist
/private/var/db/receipts/com.adobe.adobedigitaleditions.app.bom
/private/var/db/receipts/com.adobe.adobedigitaleditions.app.plist
/Library/Preferences/com.adobe.DigitalEditions.plist
The application itself, three small files scattered in your user account, to unimportant installation receipt files, and another preference file in the root Library folder. Removing those should remove everything related to version 3, which is what I have installed.
Where I substituted "user" above (for the three entries of /Users/user/...), replace that with whatever the actual name of your user account is.
Edit: I double checked the installer using a small app that sorts out every file in an installer, and where each item would normally be installed. The main app is literally the only item in the installer. The receipts are created by the OS per the installer's data, and the other minor preference files are created when the app is first run. There is nothing else.

Films - Movies not Working or corrupted in iTunes after changing the album artwork

After trying to change the album artwork for some movies I own, I realized that such movie unplayable after such change and I cannot even revert what I have done. More, it seems like if you press on the "get info" section of the movie, you will notice that the artwork tab is gone and therefore, it’s like the movie is corrupted after changing the artwork. Any ideas? Has anyone encountered this before?

Just checked and I have the updated itunes 8.0.1 with the poster frame problem.
I finally found a fix for the movie album artwork problem.
After realizing several movies had the same poster frame as one of the movies. I deleted the movie with the common poster frame which had been copied to other movies. The other poster frames changed on the other movies because they no longer had a reference to the file from which the poster frame was copied. So I copied the deleted movie back into itunes and then got to thinking that perhaps there is something else in common with the movies which displayed the same poster frame. I found that I had set the album field to the same title. So I changed the album field file by file, to something else. Then I set the poster frame after playing a few seconds of the video at a point where I wanted the frame set to the current frame. I got a film icon on the movie icon for a few seconds while it changed it. Sometimes I had to repeat selecting the different poster frames for each movie because it didn't take the first time... the second time I selected a different poster frame it was then set to the first poster frame that I selected. So now the movies which all had the same album "Aviation" now are all changed to "Flight Training" Of course, now the poster frames for those movies are all the same poster frame but at least they are correct for the type of movie.
So if the album name is set to the same thing on several different movies they will all have the same poster frame.

I cannot figure out how to change the photo size on my iPhone 5s. I was given the choice of small, medium or large the first time I took a picture. Now I have no idea how to change it to medium. Can anyone help?

I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.

By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

PDF in Word after changing the old PC

How can I use the Adobe ExportPDF after changing the crashed and old PC

Hi Zis,
I'm sorry to hear that your computer crashed. That's never any fun. But, you shouldn't have any trouble accessing ExportPDF on your new system. Simply log in directly to cloud.acrobat.com/exportpdf. And, you if typically access the service from within Reader, you can download the free Adobe Reader from www.adobe.com/products/reader.html.
Please let us know if you need additional assistance.
Best,
Sara

No effect after changing the message mapping

Hi everybody,
i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
Should it be a cache problem? Where can i delete the caches?
regards,
Sid

Hi,
I guess there can be two things.
before going to the tcode sxi_cache...
Please go to the IR, Click Environment, Cache Notification and then select author as your id.
Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
Now press refresh.
I guess this will resolve your problem

ORA-12545 error after changing the host name as IP address in Tnsnames.ora

HI,
I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
Seems you specified wrong IP address.

I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?

I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?

You can type the email using what you set in preferences and then highlight the text and use command - minus sign (or command - + for larger) to reduce the size of the text.
You can also type command - T and a window will appear allowing you to select fonts/sizes/color/ background highlight.
The above works in Notes also. I haven't tried to do this in any other Apple application.
For incoming emails, you can use the above to reduce font size, but I don't know of a way to permanently set the incoming font size to a default.

Poor Printing quality after changing the catridges

After changing the complete set of catridge print quality is very bad and only prining in Magenta & Grey color.
regards,

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

How about extensions? Perhaps you have an adblock extension installed.
Check Safari > Preferences > Extensions

EXIT after changing the document status to Parked and complete

Hi,
I have an urgent requirement to findout a exit which will trigger after changing the document status to PARKED and COMPLETE. I need this for invoice and FI document.
I will really appreciate your help.
Kuntal

Yes the Workflow Background process completed successfully with no errors. I see the error when I query up the Sales Order go to menu --> Workflow Status -->
Activity History.
The Activity History shows error in the Wait Function and the error message is 3001: Invalid command argument.?
This error message does not explain much. I followed all the steps in document# 397364.1
Don't know why it should end in error and how it can be fixed?
Any more ideas?
Thanks

I cannot reactivate my phone after changing the SIM as my apple ID is not recognised on the phone?

Similar Messages

Maybe you are looking for