I cannot rearrange layers in Muse even though they are not locked.

I have seen tutorial videos where people can rearrange the stacking order of the layers in the layers panel. Yet when I try they just won't move. They are not locked, and I have tried the master page and a normal page. Has anyone got any ideas of why others seem to be able to but I cannot.
Cheers
Ian

Ian,
I am having the exact same issue. Not sure what is going on here, but I am searching for a solution.
Jeremy

Similar Messages

  • What will make it so you can't move objects by click and drag even though they are not locked?

    I have been using the cc 2014 version for awhile now and this morning  when I select an object with the selection tool, I can't freely move it by click and drag. The object will move with the arrow keys and can be aligned with the alignment tools.

    Does it have a fill of None? Maybe you're trying to select the object on its "fill" but if there's no fill, it does not get selected.

  • All my incoming calls are coming up as unknown, even though they are not blocked?

    All my incoming calls are coming up as unknown, even though they are not blocked? Any help much appreciated!

    We didnt    Still happens to some numbers!

  • HT204150 I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help

    I have just set up icloud and all my contacts are duplicated from Address Book! My new iPhone is also showing duplicate contacts even though they are not duplicated in my address book on my computer. Please can you help?

    Also, what are the source of your contacts? are they created on the phone, or you synced from yahoo/hotmail etc.
    If thats the case, the circular arrow wont be visible but instead show "groups"
    Contacts from different accounts are not synced to iCloud.

  • Office 365 ProPlus App-V 5.0 Package installs Lync, Outlook, Infopath and Onenote even though they are not selected for publishing

    I have created an App-V 5.0 Package for Office 365 ProPlus using the documentation provided here:
    http://technet.microsoft.com/en-us/library/jj219422.aspx
    I am able to load the App-V Package into my SCCM 2012 SP1 environment and deploy the package to a test machine
    Within SCCM, I have configured the deployment type to only select a couple of applications.  Notice that Lync, Outlook, Infopath and Onenote are not selected.
    http://i.imgur.com/1eMxUlY.jpg
    For my deployment type, I only selected Word, Excel and Powerpoint.  Looking at my test machine, those 3 applications now show up in my start screen.
    http://i.imgur.com/amZmxAT.jpg
    I don't see any of the other Office applications be default on my start screen, so I would think all looks good.  If I type another Office application, lets say access at the start screen I get, "No apps match your search."
    http://i.imgur.com/fxbWEvb.jpg
    But if I type Lync, Outlook, Infopath or Onenote, it shows me that those applications are available, and I can launch them as an App-V application just as I could Excel, Word or Powerpoint, the applications that I wanted to have available.
    This is not what I was expecting when I went through the trouble to create an App-V package.  It looks like almost all of the apps become available on my client machine, all App-V is doing is making the application button in the start screen a little
    harder to find.
    What is interesting is that for the applications I did want published, I can search for them by just entering a few letters of the application name, and they show up with the 2013 version label, see below for an example search for Word.
    http://i.imgur.com/0LeS05z.jpg
    For the applications that I did not publish but still show up on my client, I have to type in the full name of the application for the launch button to come up.  For example, I can't type lyn and expect to see Lync, but if i type lync I will get an
    option to launch the application.  The same goes for Outlook, Infopath and Onenote, and when you do type in the full namke of the app, it doesn't show the version number like Word does as Word 2013, it just shows Lync, or Outlook, or Infopath, or
    Onenote.
    http://i.imgur.com/QV1afuc.jpg
    vs
    http://i.imgur.com/PxgSmUc.jpg
    Can anyone from Microsoft confirm that this is expected behavior.  If this is to be expected this is pretty disappointing, because a main point of the App-V package is it is the only way to limit which applications are deployed via Office 365 ProPlus
    but from what I can tell, it really isn't limiting anything beyond the start screen for most cases.

    So it looks like the config xml files are the best option
    http://blogs.technet.com/b/office_resource_kit/archive/2013/12/02/announcing-app-v-5-0-sp2-support-for-office-2013-volume-licensing-editions.aspx
    You can now use the Deployment Configuration file to configure the Office installation. One question I often get is, “How do I disable msaccess.exe or infopath.exe from an Office install if I am not using the MSI package?” This can be done by modifying the
    Deployment Configuration file in App-V with entries like the following:
    <Application Id="[(AppVPackageRoot}]\office15\MSACCESS.EXE" Enabled="false">
      <VisualElements>
        <Name>Access 2013</Name>
        <Icon />
        <Description />
      </VisualElements>
    </Application>
    That will prevent App-V from publishing msaccess.exe on the system and/or you can remove any undesired application shortcuts from publishing on the targeted computer using the shortcuts properties by deleting or commenting them out. Once you’ve configured your
    Deployment and User Configuration files, you’ll have everything you need to import the packages into your App-V environment to start testing.

  • HFM Security Issue - User can submit a journal by by-passing the approval step even though they are not an admin.

    Hi All,
    I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
    The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
    If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
    input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
    "User does not have the access right to perform this journal task"
    The options I have thought for a workaround are as follows:
    1.       1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
    2.       2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
    Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
    We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
    they are:
    1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
    2.   2. A data reviewer (who approves journals)
    The process is as follows:
    1.       1. Logon as Data inputter to submit the journals
    2.       2. Logon as Data reviewer to approve the journals
    3.       3. Logon as Data inputter to post the Journals
    We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
    but once it comes back to step 3, we get an error as follows:
    "User does not have the access right to perform this journal task"
    (This error comes about when the access control on custom 4 is set to None, Read, Promote)
    Custom 4 Access Rights looks as follows:
    C4_ADJ01
    C4_ADJ02
    C4_ADJ03
    C4_ADJ04
    HFMDefault
    Read
    Read
    Read
    Read
    HFMLoad
    All
    Promote
    None
    Read
    HFMReview
    Read
    All
    All
    All
    When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
    For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
    Roles for the groups that users assigned look like the following:
    Test User Name
    Test User Name
    Access Rights
    1
    Base Data input/Journal Data input
    test_HFMLoad
    Reviewer 1
    Review Supervisor
    Create Journals
    Read Journals
    Database Management
    Enable write back in Web Grid
    Load Excel Data
    Generate Recurring
    Post Journals
    Create Unbalanced Journals
    Manage Templates
    Data Form Write Back from Excel
    Consolidate
    2
    Data Reviewer
    test_HFMReview
    Reviewer 1
    Review Supervisor
    Create Journals
    Read Journals
    Database Management
    Approve Journals
    Consolidate
    Reviewer 2
    Generate Recurring
    Manage Templates
    Create Unbalanced Journals
    Any help or advice would be much appreciated.
    Thanks in advance,
    M.

    Hi All,
    I was wondering if anyone could help me with a HFM security issue on HFM 11.1.2.3 we are facing please?
    The problem is that a user can by-pass the journal approval stage and post directly after submitting if Custom4 access control=All is selected.
    If any of the other access controls (None, Read, Promote) for custom 4 are selected, the first two steps of the process are possible -
    input and approval of the journal are possible but final posting of the journal is not and returns an error that says:
    "User does not have the access right to perform this journal task"
    The options I have thought for a workaround are as follows:
    1.       1. Set up a 3rd user called data poster and remove submit journal role from user 1 (data inputter)
    2.       2. Put in place process control and use the various review levels (could be quite time consuming given there is no time left for development)
    Have anyone experienced this before and come up with a quick way of resolving this please? It would be very much appreciated.
    We have two types of users who are associated with groups in HFM and have the appropriate roles assigned to them to complete their tasks,
    they are:
    1. A data Inputter (who inputs base data and journals, who has access to create and submit journals)
    2.   2. A data reviewer (who approves journals)
    The process is as follows:
    1.       1. Logon as Data inputter to submit the journals
    2.       2. Logon as Data reviewer to approve the journals
    3.       3. Logon as Data inputter to post the Journals
    We are using the custom 4 member to identify different adjustment types. At the moment we are able to set it up in such a way whereby Steps 1 and 2 can be completed
    but once it comes back to step 3, we get an error as follows:
    "User does not have the access right to perform this journal task"
    (This error comes about when the access control on custom 4 is set to None, Read, Promote)
    Custom 4 Access Rights looks as follows:
    C4_ADJ01
    C4_ADJ02
    C4_ADJ03
    C4_ADJ04
    HFMDefault
    Read
    Read
    Read
    Read
    HFMLoad
    All
    Promote
    None
    Read
    HFMReview
    Read
    All
    All
    All
    When Custom 4=C4_ADJ01 all 3 steps can be completed but it by-passes step 2 (journal approval).
    For all other Custom 4 we complete steps 1 and 2 successfully but not step 3 due to access issues.
    Roles for the groups that users assigned look like the following:
    Test User Name
    Test User Name
    Access Rights
    1
    Base Data input/Journal Data input
    test_HFMLoad
    Reviewer 1
    Review Supervisor
    Create Journals
    Read Journals
    Database Management
    Enable write back in Web Grid
    Load Excel Data
    Generate Recurring
    Post Journals
    Create Unbalanced Journals
    Manage Templates
    Data Form Write Back from Excel
    Consolidate
    2
    Data Reviewer
    test_HFMReview
    Reviewer 1
    Review Supervisor
    Create Journals
    Read Journals
    Database Management
    Approve Journals
    Consolidate
    Reviewer 2
    Generate Recurring
    Manage Templates
    Create Unbalanced Journals
    Any help or advice would be much appreciated.
    Thanks in advance,
    M.

  • I pod has no sound without headphones. when i push the volume keys it says headphones even though they are not plugged in

    My iPod has no sound unless headphones are plugged in. When i push the volume keys it says headphones

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • How do I access RAW files in Photos - these showed up in iPhoto but cannot be accessed in Photos even though they have been imported. Retrograde step again Apple

    How do I access RAW files in Photos - these showed up in iPhoto but cannot be accessed in Photos even though they have been imported. Retrograde step again Apple.

    Although more recent, and with newer devices, I have been trying to find this same information.  Please help!

  • TS3276 Someone who receives my mail sent from Apple Mail cannot receive attachments or read my email even though they are on a Mac using Safari.  How could they be using Safari to receive or read my mail?

    Someone who receives my mail sent from Apple Mail cannot receive attachments or read my email even though they are on a Mac using Safari.  How could they be using Safari to receive or read my mail? 

    You can lead a horse to water, but you cannot make it drink.  This person receiving my email,  while on a Mac with Safari is reading their mail through Safari using Horde--our recent discovery.  Why they chose to do that in unclear. The last email we sent, however, was miraculously read and received and  the attachment was viewed with no problem after we told them our mail was coming from a Mac thriugh Apple Mail.  It seems that telling them that our emails were coming from a Mac and using Apple Mail was enough to make them think that perhaps THEY were doing something not quite right. Thank you both, Level 7 and Level 5. 
    But thank you especially for the meteorologists in the UK for putting forth the correct routes for Sandy these last days, you probably saved a lot of lives.

  • Why does Indesign say I have missing fonts even though they are in my packaged document?

    I use CS4 on my pc at work, and always package my files, as I have always done on my mac at home, to keep the links and fonts together so that when I send someone a folder, all of the fonts and images work.  For some reason, the packaged graphic designs (created on a mac) that are being sent to us from our graphic designer, all of my fonts are lost - even after having purchased the main one that we use - Gotham - to prevent this from happening.  This also occurs with any designs that I package and send out to others in our office.  I always have to relink the Gotham fonts, and I cannot retrieve the formatting for the fonts that we don't have, even though they are packaged. 
    We are considering purchasing a mac for me to use in the office, but I'd like to make sure that it is not user error before we proceed.
    Any ideas would be wonderful.  I never had this problem with my mac at home with packaging, and it has me confused and frustrated at work.
    Thanks!

    Since CS6 is the current release, upgrading to CS5 is a near impossibility, and EVERYONE will need to upgrade in lockstep or you'll be worse off than you are now with users of your newer version creating files that cannot be opened by users of CS4 (and your CS4 packages won't automatically install the fonts in the documents in the later versions without manually changing the names of the packaged fonts folders).
    As far as font formats, if you are going to collaborate cross-platform, the font of choice is OpenType, which is 100% cross-platform compatible, and second choice is Windows TrueType which also can be installed on Mac OS X (so, essentially, also cross-platform). Last choice would be to use Windows Type1 which can be installed in the private InDesign Fonts folder in the Mac applications folder and will work in ID, but nowhere else. Any of these would allow everyone to use the same fonts, presuming you all purchase the same versions. Purchasing Windows versions and Mac versions of the same font usually works, but there may be little surprises, and you probbly don't want that.

  • Not all my songs are showing in itunes even though they are in the Itunes Media file directory

    Not all my songs are showing in itunes even though they are in the itunes Media Dir.  I have spent hours trying to find out why so I moved the songs out of the Music/itunes/itunes media and uninstalled itunes.  I then restarted my pc and re-installed itunes.  When I opened itunes the same songs are still there (but cannot be played as cannot find location) even though I have not put anything back in the itunes media dir.  To me there seems to be a refreshing problem as itunes is not looking at the directory even through the advanced preferences area is mapped to the correct area.
    Help please.
    Thanks

    Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
    The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
    See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
    tt2

  • Location services don't work even though they are on

    My location services do not work even though they are switched on. When I ask Siri something that requires my location it tells me to turn on location services and Siri but they are already on.

    For location the iPod uses the location nearby wifi routers that are in Apple's data base. You do not have to be connect to the router.
    Thus, it appears that the router the iPod is using does not have the correct location in Apple's database. Apple continuously updates their database based on data it obtains from iPhones. No one has found a way to tell apple to correct/add a wifi router to their database.
    To test this, go to another location/another network like Starbucks and see if location work there

  • My iPhone 5 has someone in Contacts that is not on my iPad or Mac even though they are all connected to my iCloud account how can I re-sycronise them?

    my iPhone 5 has someone in Contacts that is not on my iPad or Mac even though they are all connected to my iCloud account how can I re-sycronise them?

    Hello Mr Potatohead,
    Thank you for the details of the issue you are experiencing with your iCloud Contacts.  I recommend reviewing the sections titled "General troubleshooting," "Troubleshooting with iOS devices," and "Troubleshooting iCloud Contacts in Contacts on OS X Mountain Lion or later (or Address Book on OS X Lion)" in the following article for the issue you described:
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

    I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

    I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos.  I can stand to re edit one or two projects, but not ALL.

  • HT2953 i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can  anyone please help?

    i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can  anyone please help?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

Maybe you are looking for