I cannot receive or make calls any suggestion of what to do?

I cannot receive or make calls any suggestion of what to do?

i am having the same problem with this new 4s. what did u do?

Similar Messages

  • Genius bar of little help...iphone: "cannot receive or make calls..."

    went to the genius bar today because my iphone is apparently dead, and at&t won't touch it in terms of service.
    get there and the guy says i have to make an appointment for tomorrow. and asks me for a number where i can be reached. again explain that the number at which i can be reached "cannot receive or make calls..."
    anyone know how i can get this fixed now? and not have to pay for cell service that i can't even use?

    Apple handles all iPhone repairs or exchanges under warranty. You can call AppleCare at (800) 694-7466 to handle everything over the phone, or make an appointment at an Apple store if there is one nearby.
    If you can't make a call with your iPhone, it isn't a good idea to call technical support from the iPhone you are having a problem with anyway, and the same with a technical support problem with any cell phone since troubleshooting steps may involve doing something with the device that prevents being able to remain on the phone.
    I don't have a landline at home so when I've needed to call technical support for any cell phone I've used in the past, I make the call from work, or from the landline of a family member, friend, neighbor, or pay phone.
    Are you able to access the internet via the cellular network and receive or send SMS?
    If so, this may be due to a problem with your SIM card. If there is an AT&T corporate store nearby, you can tell the store about the problem and request a new SIM card to see if this resolves it. The AT&T store can activate your iPhone with the new SIM card.

  • Cannot receive or make call and receive or send text messages in areas where there is a high wifi signal.

    Please help me. I just got my iphone 4 last february and it was working just fine. But recently, i am having problems with its phone features such as text messaging and call. Most of he times i have a full network signal yet i cannot receive or make a call, receive or send text messages. I have also observed that everytime i am in a wifi zone where its signal strenght is high, this problem always exists. There seems to be no problem with its other features...please help me anyone.

    Wi-Fi has nothing to do with making/receiving calls, or sending/receiving text messages... those features only work over the cellular network.
    Have you contacted the carrier to rule out network issues or swap out the SIM card to eliminate that as a possibility?
    What about Settings > General > Reset > Reset Network Settings?

  • TS4002 Cannot receive incoming mail. Any Suggestions?

    I am able to send mail but not receive it on my iMac with version 10.7.4. I had mac mail and signed up for iCloud. Any suggestions? I have the lightening bolt under the Inbox .Mac mail and then I try to push the mail the spin sign keeps spinning.

    After struggling for several more hours with my issue adding my MSN mail account to my new iPhone6's iOS8, I finally figured it out!  Apparently, this applies to Hotmail as well.
    Here's the fix, in case someone else happens to need it:
    Instead of selecting Outlook.com or Other after tapping on "Add Account," select Exchange.
    Enter the username as the email address.
    Don't enter your password!  From the desktop or laptop that you normally use to access your MSN/Hotmail email, log out of your email account and then log back in, go to your account settings, click on Security, and then request a temporary password for access via apps.  That password will be a funky, long combination of random letters and/or numbers.  It will appear on your computer screen right away.
    Enter that password onto your iOS8 device.
    Voila, you're done

  • Cannot receive or make calls

    Cannot make or receive calls when near my wi-Fi since loading iOS 7. Can when away from it. HELP!

    What did your carrier has to say about this?

  • "FaceTime failed" cannot receive or make calls

    I'm on a 2010 MacBook pro and whenever I try to make facetime calls, it immediately says "FaceTime failed" without ringing or anything for all of my contacts. When I receive a call, it rings but it has the same message when I try to accept the call. I've tried everything on the support page and have even changed my DNS to 8.8.8.8 and 8.8.4.4. I also tested it out while tethered to my iphone's LTE and it had the same problem, which rules out network problems.

    Hi,
    There are many threads here that report people have taken their Mac to an Apple Store and have had the Serial Number "replaced".
    However in those cases the Mother or Logic Board had been replaced in  a Repair or Refurbishment.
    To Reinstall an earlier version of the OS by using the DVD Install disks you would have to Insert them then Boot the Mac from that Disk.
    Then you would have to open Disk Utility from the Menu bar and Erase the current OS and other contents before you could run the actual Install.
    This does lose everything on that Drive so it is best to create a Back up First.
    I am not sure what else to suggest.
    8:11 pm      Sunday; December 1, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Cannot receive or make calls AT ALL!!! Iphone 4s

    This is my 2nd iPhone. I had the 1st replaced due to calls freezing on the dialing screen, but dial no tone to be heard.
    Despite this, the reciever would still get the call, just no signification on my end that it had been calling let alone picked up.
    This has now happend again, except now my texts will no longer tell me they have sent, yet are still received on the other end.
    Has anyone else had this issue?
    I have my iphone 4s since November, to which has been replaced already in that time.
    I am on o2, in the UK. Any advice would be grand.
    Liam.

    When I received the replacement, I set as new iPhone.
    I have tried restoring, resetting and restarting and had no luck.
    I haven't contacted the carrier, which will be my next step.
    I upgraded in Nov 11, and got the replacement in Dec 11. Both of which are having the same issue. I inserted a friend's sim into my phone and had the same issue, also put my new sim into my old 3gs and had the same problem. Which is frustrating as I resorted to this through the time I was wating for a replacement and it worked fine.
    what all of the devices have in common is that they are all running on IOS 5, coincidence? considering the amount of bugs that have been reported?

  • I have 2 different email addresses for Facetime.  I now cannot receive or  make calls on one of the emails. I deleted, then readied the nonworking address, but I get a message that says "Email address is already verified for another Apple ID." Help!

    When I open Facetime, I see a blank screen now- no contacts or numbers. How do I add this email address to my account? Thank you.

    I have also noticed the same "problem".  I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

  • I upgraded both my iphone and mac os and I noticed that when listening to internet radio I only get 1 channel whereas before I was able to receive 2 channels. Any suggestions?

    upgraded both my iphone and mac os and I noticed that when listening to internet radio I only get 1 channel whereas before I was able to receive 2 channels. Any suggestions?

    I received my week 16 MBP yesterday morning. It has been perfect thus far. Quite the improvment over my old iBook. I do hear some noises rarely but not enough to make me think there is a problem, I believe they are just the standard purrs and ticks of a high-powered computer. It doesn't run hot. I'd say cool to rather warm if used heavily. I hope I have a problem free experiance. I would hate for this product to tarnish Apple's reputation, that would be unacceptable considering this product is amazing. I will say this; I called Applecare, more out of curiousity than anything else and told them that I had just purchased an MBP and, while mine was fine, I had heard allot of disturbing reports about noise and heat. I asked point blank if Apple was aware of any issues and if they where working to resolve it. The answer I got was surprisingly forward. I was informed that they were "VERY" aware and working to correct the issues. He then told me I was lucky to recieve one of the quiet MBPs. I hope they work it out soon.
    MacBook Pro   Mac OS X (10.4.6)  

  • My power button has been broke for a while and now i cannot turn my phone on, any suggestions ?

    my power button has been broke for a while and now i cannot turn my phone on, any suggestions ?

    If the battery was completely dead it may take some time to get it going.
    Leave it pluggen into a wall jack for about 15 minutes then check back.
    If not, you will need to make a Genius Bar appointment or contact Apple for a repair.

  • HT1657 my rental has reported a download error and cannot be downloaded or deleted - any suggestions?

    my rental has reported a download error and cannot be downloaded or deleted - any suggestions on how to fix it one way or another?

    Hello there, asim01.
    The following Knowledge Base articles offer a few pointers with troubleshooting issues with downloads from iTunes. First thing to try is verifying connectivity to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If the issue is related to an interrupted download:
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Ultimately, if you are still unable to download your purchase, feel free to report the issue using the following information:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT201413 I am receiving a message saying the iPod "TRACER's iPod" can not be synched. The required file can not be found. I ran the iTunes program repair and restarted both the computer and the iPod. Any suggestions on what else to try?

    I am receiving a message saying the iPod "TRACER's iPod" can not be synched. The required file can not be found. I ran the iTunes program repair and restarted both the computer and the iPod. but still receive the same message. Any suggestions on what else to try?

    That can sometimes be caused by a damaged ipod photo cache.
    If you remove the current ipod photo cache, does that get you past the error?
    For instructions on where to find it, see the following document:
    iTunes: Understanding the iPod Photo Cache folder

  • TS1363 my ipod shuffle downloaded a few songs, but now says that it's locked and cannot be written to.  Any suggestions?

    \my ipod shuffle downloaded a few songs, but now says that it's locked and cannot be written to.  Any suggestions?

    Hello musicalgal4377,
    The following article details a number of likely causes for this particular message.
    'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    http://support.apple.com/kb/HT1207
    Cheers,
    Allen

  • How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Cannu help me plz

    How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Can u help me plz

    Settings you make in ACR for a Raw file are written to the separate XMP side car file. (The Camera Raw preferences has this set by default and to my opinion it should stay so, but the other option is to save them in a central database)
    However, opening the same file in ACR and make new adjustments the previous settings are overwritten by the new ones. You can save them separately but that would be a hell of a job. If you want to be on the safe side you should make a proper back up of the whole folder (be sure to have the XMP files included, by default those are hidden files in Bridge) before someone else starts playing with the settings. However, you can always go back to the default version using the option in the little menu icon next to the name op f the panel (first panel is Basic). click on the icon and from the provided menu choose 'Reset Camera Raw Defaults' to go back to the originals.
    I don't use jpeg in ACR very often but I believe ACR settings for jpeg and tiff are written in the XMP data in the file itself instead of a separate XMP file. You can revert to default or make new settings that also overwrite the older settings.
    Making adjustments in ACR shows the results in Bridge (it uses the XMP data for the preview) but to make it visible in other apps you also have to save them in Photoshop itself to make the changes persistent so that mail and print reflect your settings.
    So basically, let her play with the files and either chose the option to save the files (bottom left in ACR Window and choose the wanted provided options or open and save them in Photoshop to get the proper result. And if you want to be on the safe side let here use her own copies and keep the originals to your self.

  • Since downloading Firefox when I go on the Internet Internet Explorer pops up with a message - IE cannot open the webpage - Favorit. I have tried everything but cannot stop this happening. Any suggestions? Thanks. I am running Vista.

    Since downloading Firefox when I go on the Internet Internet Explorer pops up with a message - IE cannot open the webpage - Favorit. I have tried everything but cannot stop this happening. Any suggestions? Thanks. I am running Vista.

    The exact same things happend to me!! how frustrating! ive reinstalld it soooo many times and quicktime seperatly too as i have had so many different error messages including something to do with quicktime, i dont know what to do but as you said my ipod is useless with out itunes! if anyone works this out let us know! thanks alot x

Maybe you are looking for

  • Logical operator in datatemplate query

    Hi, I'm having trouble writing my queries in a datatemplate. The problem is, when I have to use the logical operators <>. More specific, my sql query has a less than condition, but when I try to save the datatemplate with my query, I get an error mes

  • Downloaded files won't open, and mouse sometimes disappears

    Hey there, I've just been having some rather minor problems with my iBook, and I thought maybe someone could help me out. First of all, my iBook won't open a lot of applications that I download. It says that it can't find the application to open the

  • Two ePub Questions

    Hello, I am formatting a novel to epub format. Everything has gone perfectly using character and paragraphy styles, etc. My two questions are as followes: 1. I've used the first page of the document to be the book cover without problem, however, wher

  • WARPING OF ALUMINUM!!! NO DROPS!!! ***??

    I got a macbook in october. About 2 weeks later, these warps started showing up. they are mainly around the bottom right corner, around the IR receiver, and the left corner too. This thing is my CHILD. I haven't let it out of my sight. I am getting a

  • Build and go on Device under Debug error

    When I try to build and go an application I made on my device (iPod Touch) I get the error Command usr/bin/codesign failed with exit code 1 Help would be appreciated, Mr. Man