I cannot register my commercial CB 2 upgrade version

I purchased a ColdFusion Builder 2 license - with an upgrade from Adobe Web Premium 5.5. It recognized my CFB 2 serial number just fine - but it is not picking up my CS Web Premium 5.5 serial number (yes, all clear and legal of course). Very weird, can Adobe please check this out?
I am running CFB 2 on a new MacBook Air 13 with OSX Lion - 1.8GHZ i7 . I have Adobe CS 5.5 Web Premium already installed on the machine - all verified, all good. Thanks.

Hi,
Can you please update us on your contact details (email id and contact number), where we can reach you...

Similar Messages

  • 7920 cannot register with AP after firmware upgrade

    We have a customer using 7920 with Firmware 1.08.
    He tries to test the Beta firmware (cmterm_7920_3.3.02_05_005.bin) on some 7920.
    The upgrade finished correctly and after reconfiguration, 7920 register to the APS.
    On two devices, he got a problem:
    - The configuration menu is hidden. We try to enter the sequence *## ‘send’ but without success.
    - The ‘reset’ with sequence *7#9#2#0#* is not working (it was working on other 7920 when locked by password)
    - USB parameter is hidden, so we cannot activate it.
    - We try to download an old firmware (cmterm_7920_3.3.01.03.bin) trough USB port, using the boot function after power on, but we got the message: ERR304-Memory insufficient to upload the firmware image.
    - We try to use an AP with basic configuration, broadcasting SSID cisco or tsunami, but 7920 stay with the message ‘No AP found’.
    So, these two 7920 are unusable now.
    Have you any suggestion? Daniel Bill

    First off 02-05-005 is not a 7920 image. He may be using 02-01-XXX, which is an engineering image and shouldn't be used in production. Can try Menu->*##->Send then config menus will be unhidden.
    Also *7#9#2#0#*, will just factory default the phone if phone lock is enabled, where you are prompted for a password at power on.
    Are you saying the phone will not boot now? If so, then call TAC. If they can boot, you can enter admin secret to expose hidden menus and enable usb to upload the firmware via USB or either configure the 802.11b paramaters to upload via TFTP wirelessly.

  • TS3212 When I try to update my Itunes I get an error itunes setup exe not a valid Win 32 application.  I have a new phone and I cannot register or sync until I upgrade Itunes.  Any suggestions.

    I cannot get my Itunes updated to the 10. that is required for my new Iphone. The error is itunes setup exe not a valid Win32 application.
    Can someone please help me out, I really need to get this phone up and working.

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • Cannot register iPod - help!

    i got an iTouch for my birthday, and i tried to connect it to my computer. It gives me the option to register it, but i can't find the button to register it. i only see a button that says 'register later.' it starts to cut off the words, like if there was a scroll bar to move to the right, i dont see it. its definately not there. i have an old iPod, which is connected to another computer in my house. that computer is way old and i dont think the iTunes library will let me buy any more songs because i'm unable to upgrade to another level of iTunes. but thats not the problem i'm having.
    i would like to register and start using my iTouch sometime soon, but i cannot register it.
    please help!
    thank you

    i've had a long day of school and practice and i'm going to sound like a complete idiot when i ask you this.. where is the control panel?
    haha i'm really sorry
    i know i've seen it before, i just cant find it

  • Cannot register a Solaris 10 11/06 (the problem seems to be my Sun account)

    Hi.
    I cannot register a solaris 10 11/06 neither with updatemanager nor with sconadm. After some minutes, the applications fail with an "Authentication failed" message. The funny thing is that:
    - if I try to create another account with updatemanager, it says that my email address is already associated with an account...
    - if I click the "I forgot my password" link, an email is sent to me with the password reset. I login, I change my password again and when I retry, the registration fails again.
    Any hint?
    Thanks,
    Enrico.

    Sorry for the delay, thank you for the reply.
    I'm running 1.5.0_08, so I'll upgrade my system and try again. By the way, I was reluctant to upgrade java because I didn't found a solaris package on http://java.sun.com/javase download page. I'll try and let you know.
    Thanks,
    Enrico.

  • Cannot register servers in 11.1.2

    We are implementing upgrade to 11.1.2 and cannot register servers. Has anyone else resloved this?

    Hi
    Could you provide more details?
    Regards
    Alexander

  • I cannot register my ICQ & AIM, and...

    Hallo all,
    I recently upgraded from a Blackberry 8700g to a Curve, which I must say I love the new features. However, I have been having trouble with 2 things.
    The first is when I go to the Blackberry website to register my phone for the AIM and ICQ chat services. Yes, my phone has "Edge" in the upper right corner. I have also reboot my system and tried connecting my USB cable at various stages during the process. However, everytime I try to register, I get "an unspecified error has occurred" and I cannot register my phone. Any ideas?
    Also, the time it takes for an email to send from this phone is insanely slow as compared to my old 8700g. Clocking the last email it was about 7 minutes. Is this normal? If it is text only, it is only about 2-3 minutes, at worst. When I attach a file or picture, it jumps up astronomically. I have checked my settings, and am stumped.
    Any advice on these two issues would be appreciated.
    Thanks!

    Are you capable of using AIM and ICQ in your previous device? Check this link http://www.blackberry.com/instantmessaging. AIM, ICQ and Yahoo is not open for all users. Yahoo followes a policy where it supports yahoo messenger access to some regions only. Same goes for AIM and ICQ. But there is a ruor that Blackberry is going to open it up...but no official communication till date.
    Regarding the slowness of your device please let me know which version of device OS you're using now?
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Cannot End Call on Q10 after upgrading to OS 10.2

    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

    marootz wrote:
    I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
    From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot print a PDF file after upgrading to Windows 8.1

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

  • I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it.

    I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it. Adobe no longer supports activation. Is there a way I can keep using CS2? I need to get files back and forth to my coauthor. I also have CS6. I understand that files can go form 2 to 6, but not backwards. Thanks Robert

    you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads

  • I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

    want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

    I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

    here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

  • HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

    i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

    read http://support.apple.com/kb/TS3424

  • Cannot register my CC and I do not know why

    I cannot register my CC to purchase. There is no problem with information, what to do?

    What do you mean you cant delete? Are they still in your contact app or they come up when you text or call them?

  • Calendar clients  4.03 cannot work offline since we have upgraded to Calendar Server 4.0

    Macintosh Calendar 4.03 cannot work offline since I have upgraded to Calendar Server
    version 4.0. When users attempt to either go offline or login offline,
    they receive module errors:
    <P>
    Module:>CApplicationCorporateTime.cp>,
    Label:20, Service error#(0x1320a)
    <P>
    It looks like versions 4.03 and lower clients (primarily on the Macintosh) are unable to
    properly handle data from the 4.0 Server as it was able to in the 3.5 server.
    <P>
    There have been changes made with the new 4.0 server version as to how a
    password is sent over the network to the client. In order for a customer to
    use an old client version (pre 4.5) with the offline agenda, the following
    parameter needs to be set in the server's /users/unison/misc/unison.ini file:
    <P>
    [ENG]
    pwdreturnonitemget = TRUE
    <P>
    Once all users have been upgraded to client version 4.5x or higher, it is
    highly recommended to remove this parameter or to set it to the
    default value FALSE.
    This parameter becomes active as new client sessions are established. It is
    not necessary to stop and start the server.
    <P>
    The best solution for this issue is to only use Calendar client versions 4.5
    or higher.

    Macintosh Calendar 4.03 cannot work offline since I have upgraded to Calendar Server
    version 4.0. When users attempt to either go offline or login offline,
    they receive module errors:
    <P>
    Module:>CApplicationCorporateTime.cp>,
    Label:20, Service error#(0x1320a)
    <P>
    It looks like versions 4.03 and lower clients (primarily on the Macintosh) are unable to
    properly handle data from the 4.0 Server as it was able to in the 3.5 server.
    <P>
    There have been changes made with the new 4.0 server version as to how a
    password is sent over the network to the client. In order for a customer to
    use an old client version (pre 4.5) with the offline agenda, the following
    parameter needs to be set in the server's /users/unison/misc/unison.ini file:
    <P>
    [ENG]
    pwdreturnonitemget = TRUE
    <P>
    Once all users have been upgraded to client version 4.5x or higher, it is
    highly recommended to remove this parameter or to set it to the
    default value FALSE.
    This parameter becomes active as new client sessions are established. It is
    not necessary to stop and start the server.
    <P>
    The best solution for this issue is to only use Calendar client versions 4.5
    or higher.

Maybe you are looking for