I cannot remove or install app on ipad

I Have an iTransmission app on my ipad stuck installing. I dont know where its coming from, i cannot find it on appstore. I dont see it any other places than as an app not finished downloading. I have tried reset, auto update off, itunes sync ect.
Any suggestions are welcome..

Your English is fine. And for give me for being redundant with this post, but I have a boilerplate response that I post for people that have problems with "waiting" icons - apps that will not finish downloading. You have tried a few of these suggestions already, but I will post it anyway and you can pick and choose from the other suggestions.
Numbers 3, 4, 5 & 6 might help.
1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Similar Messages

  • Can the new pre installed apps in iPad 2. Like garage band, iMovie be sync back to i tune, and then sync these new apps from ipad2 to the old iPad 1?

    Can the new pre installed apps in iPad 2. Like garage band, iMovie be sync back to i tune, and then sync these new apps from ipad2 to the old iPad 1?

    GB and iMovie pre installed?
    http://www.apple.com/ipad/built-in-apps/
    Click: Browser All Built In Apps
    iMovie and GB must be purchased.
    If you have installed GB and iMovie on the iPad 1 and synced using iTunes, just sync the those apps to the newer iPad with iTunes. No re purchase necessary with the same iTunes account.

  • Hi guy!...i cannot update and install app from app store after upgred to iOS 6.1...any idea how to fix this..tq!..

    please help me to fix this problem on my iphone 5....cannot update and install app from app store after upgrade to iOS 6.1...

    9w6sun wrote:
    ..cannot update and install app from app store after upgrade to iOS 6.1...
    what happens when you try...?
    Any error messages or Alerts.

  • Cannot instal app on iPad because of new iPad software (?)

    Hi, we created a folio using InDesign CC and built the app with the DPS App Builder Version 2.9.0 which we updated on Jan. 13, 2014.
    We created an App ID for this app, and created and used the Developer mobileprovision and Distribution mobileprovision that we generated for this app. We also made sure that the these mobileprovisions included the devices that we wanted to test the app in. We were then able to create the ipa file, which was placed on the desktop.
    The problem is, we cannot test the app in our iPad even though we created a similar app and tested it on our iPad last year.  Every time we add the ipa/app to Library via iTunes, it always says "The app [insert app name] was not installed on the iPad [insert iPad name] because it requires a newer version of iPad software."
    The software of the iPad we have is version iOS 5.1.1 and it says that the iPad software is up to date. The model is also MB294LL (if that helps at all). I'm guessing this is one of the earlier iPads, if not the earliest one. Also our Digital Publishing Suite is the Single Edition.
    Questions:
    1) Is the reason why I can't put the ipa file in this iPad because we used a newer version of the DPS App Builder?
    2) Was last year's version of the DPS App builder more compatible with the old iPad?
    3) If so, is there a way to create the app that will make it compatible with old and new iPads? Still using the new version of the DPS App Builder (Version 2.9.0) and DPS Single Edition.
    4) Again, if this is the case, which software of the iPad is most compatible with the DPS App Builder Version 2.9.0?
    Any answers will be a great help.

    DPS no longer supports iOS 5. You need to have a device running iOS 6 or later.
    Neil

  • Cannot install apps on iPad 2

    For the past few days, I have been unable to install or update apps on my iPad 2 (running iOS 5.0.1). When I select an app to install from the App Store, it appears briefly on the iPad desktop as if it's about to install and then disappears. I've rebooted the iPad, closed all open apps, and signed out and back in to the App Store. I am connected over 3G and have no other network connectivity problems.
    I can install apps fine on my iPhone and I can install updates to apps through iTunes on my iMac with the iPad connected to it.
    Any ideas on what might be wrong?

    Chris,
    If you're still having this problem - as I am, please call Apple Support so they can log it in.  I spent a lot of time with one of their senior people troubleshooting and at this point the only resolution they can come up with is to do a clean wipe of everything and a new re-install, which is a big undertaking if you have a lot of apps and customizations.
    If Apple has enough calls to prove this is not an incidental problem for only a small % users, they can escalate the problem to engineering for possibly an easier fix.

  • Install app in ipad 5.1 from xcode 4.2 ios 5.0

    Hello All,
    I have latest xcode for the snow  leopard which is xcode 4.2 with ios 5.0 and my ipad has 5.1 ios.
    When i use organizer to install app it says the version of my xcode ios is not matching to the my ipad.
    Please have a look at the attached screen shot for more detail
    Please provide solution how I can install app in the device.
    Thanks in advance,

    You need to update to the latest version of the iOS SDK, just like the message says.
    That means you need to update OS X to Lion as Lion is required fo the latest version of the iOS SDK.

  • Need help installing apps onto iPad 2 (all apps appear as "waiting" ever since iOS 5.1)

    Ever since I updated to ios 5.1 on my iPad 2, I've been experiencing a lot of difficulty in downloading and installing apps without the aid of my computer's iTunes. Every app that I've downloaded since the update has gotten stuck on waiting. Also, when I tap and hold apps (to sort and delete), I get the option to delete the waiting apps (it even warns me that I will delete all of its data off my iPad. What data?). Sometimes they show the icon, sometimes they just show white. Usually I get the icon after I reset, but still waiting. This also applies for any updates. What I have done to try to fix this:
    -reset the iPad
    -delete the waiting app and try installing it again
    -check my Internet connection
    -sign out and sign back in with my apple ID
    -tap the waiting app to try to start it
    -install only one app at a time
    ****I am well aware that I can sync to iTunes, so please do not tell me to do this. It does install the apps when I sync it to iTunes, but it's also very inconvenient to do every time, especially because I have so many apps (13 gb to be precise) and I'm usually away from my computer.
    Any help would be appreciated.

    Did some additional checkin' ; the same behavior applies when powering off ...
    when starting up again after few secs it normally starts up (approx 20 secs). When starting up after approx an hour it takes about 2-3 minutes to respond ... weird ...
    anyone ideas ?

  • Fail to install apps on iPad 3 with iOS 7

    Dear all,
    I just updated to iOS 7.0.2 on my iPad 3. When I try to install apps from the App Store, they just keep loading and loading and don't start to download. Right now, I can't actually install any apps, including apps that I have bought before. Can someone help me solve this problem please?

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • Problems installing apps on ipad via ICU

    Hi Everyone
    I am an IT admin and have been using the iphone Configuration Utility to setup iPhones and iPads.
    I have the latest ICU version 3.61.296 and the latest Itunes version version 10.7.0.21 on WIN 7 SP1 64BIT and I am having problems installing apps onto the iPad 3 version 5.1 (9B176). We do not want to upgrade to IOS 6 yet, because we do not want to lose Google Maps.
    I have loaded the latest version of Facebook, Twitter, Yammer and Minivan Touch apps into my ICU under APPS, then I select devices, select my iPad device, click the Application Tab on ICU, select the app to install, click install and it installs OK.
    But when I go an run any of the apps I have just installed, it flashes quickly on the iPAd screen and does not launch.
    What am I doing wrong or irs there a bug some where?
    I have always been able to install apps in the past and also run them correctly.
    Please help someone.
    Thanks
    Regards
    FSU Itsupport

    In iTunes, go to Edit>Preferences>General   and make sure that the "Apps" checkbox is ticked

  • Cannot open itunes and apps on ipad after new download

    Hello - just download the new iOS 7.0 software to ipad and iphone 4s but now cannot access itunes or app store.  Can anyone advise what to do?  Thank you.

    I got a message that it was not possible and that I should delete IPhone from my computor and download a new program from Appstore. I did so but the same message appears.
    What is the exact error message you get, when you try to open iPhoto or iTunes? Please post it litarally.
    What versions of MacOS X and iPhoto are you having?
    How much free disk space is on your mac?
    Where do you keep your Media? iPhoto library, iTunes Library? On your system drive or on an external disk?

  • I have tried everything and still cannot remove the lock on my ipad. I do not want it.  HELP

    I guess it is a. Ipad 2 with/fi. invoice says k93ipad wi-fi 16gb.  I am not sure what it is. I accidently set up a password lock and I do not want.  I have tried all the suggestions and cannot remove the lock

    See here: http://support.apple.com/kb/HT1212

  • Not able to install app on iPad with iPhone packager

    I am trying to publish .ipa file on my iPad but at the end i am getting error which is mention below:
    The app "Test" was not installed on the iPad because the entitlements are not valid.
    Looking for support on this issue.
    Thanks in advance

    There are some things you can do wrong that will stop you from making the IPA file, but there are other things that won't stop the IPA being made, it just won't work on your devices.
    Can you try these command line things?
    Take the IPA file and decompress (it's just a zip file) it to get the Payload folder.
    cd into the Payload folder.
    Type: codesign -dvvv appname.app
    where "appname.app" would be the name of the file in the Payload folder. That will then show some lines of information. Can you paste here what you see?

  • Can't install apps on ipad 2 iOS 6

    I'm trying to download and install apps to use but it appears when i clicked install , it keep on appearing the word " waiting " on those apps icon . Maybe some help from u guys can help me get rid of this problem cause i really need to use those apps i wanna download. EMERGENCY . Thx .

    Try a reset:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

  • Will the app specific files get deleted when i remove/uninstall an app from iPad

    I mean those files added to an app using iTunes. For example, pdf files added to a reader.
    Do these files get deleted when i delete an app from iPad?

    I've learnt that this data do get deleted along with the app during deletion/uninstallation. Please correct me if I'm wrong.

  • HT201269 Cannot find "authorize this computer" to re-install apps to iPad after upgrading software.

    I want to re-install selected apps, especially those I've purchased, to my iPad after I synced the iPad to my new laptop, and upgraded the iPad's software. Now I cannot do so because my computer needs to be authorized. I cannot find the path suggested in the help screen. My laptop is a PC.

    Welcome to Apple Support Communities
    If you are using iTunes 11, first you have to show up the iTunes menu bar > http://support.apple.com/kb/HT5610 You can do this with Control and B keys.
    Finally, go to the Store menu (in the menu bar) > Authorize this Computer.

Maybe you are looking for

  • Log-on client 200 is not the same as BI clients "600"

    Hi Experts, My data load got failed and when i checked the error message, it says " Log-on client 200 is not the same as BI clients "600"". Diagnosis You are using client-dependent BI functions in client 200. However, the standard BI client is 600. S

  • Why pop up message comes now if i use find my iphone to locate my family phone added with same id

    I was using find my iphone app to locate my kids as all my iphones were registred against one ID. They never come to know that I am locating their location and know where they are. Now I come to know that when i tried to locate them pop message comes

  • Maximum HD size in Mac Pro (early 2008)

    Hi all, I'm just wondering if anybody has had any issues putting a hard drive larger than 1TB in the 2008 Mac Pro. I'd like to stick in 2 more 1.5 Tb or even 2 Tb drives in my remaining slots. Thanks!

  • Saving Fireworks 8 png files

    I am sure this is a well known problem, but I can't find a solution that works. I am using Fireworks 8 on a PC with Windows XP. For some unknown reason it has stopped saving png files, although it will save as gif, jpeg etc. When I try to save a file

  • HELP to open database (again)

    Hi, saga continue: svrmgr> startup mount; Database mounted svrmgr> alter database open read only; ORA-16005: database requires recovery svrmgr> recover database; ORA-00283: recovery session canceled due to errors ORA-00264: no recovery required svrmg