I cannot replace my useless drivers on my g60-549DX notebook. .

I cannot download/replace the drivers on my laptop.  also, i cannot connect/print with my hp wrt320 photosmart printer.

Wish you luck.  You are in good company.  None of the HP ENVY series appears to be able to upgrade to Windows 8.1 and no one at HP appears to know why.  In additgion, if you have looked lately, you may even find that there are no longer any drivers listed for Windows 8x64 either.  Only a place  to click to order (and pay for I presume) a Restore DVD.  Interesting choice of options considering the TouchSmart Windows 8 x64 models do not even have a DVD player to restore From in the first place.
HP definately dropped the ball on this one a it loks like they are not even going to provide solutions for those of us under Warranty.
Error codes I get are 0xC1900101  and  0x40019
I have read others saying it is a hardware problem but HP refuses to do anything about it

Similar Messages

  • Hp g60 549dx motherboard replacement, how much will it cost parts & labor?

    Will appreciate very much if you can inform me, how much will be the cost for parts and labor to replace the motherboard of my HP G60 549DX. 
    Also include where to bring the unit here in Manila.
    Thanks a lot
    Dave
    This question was solved.
    View Solution.

    Hello bebotski59,
    Welcome to the HP Consumer Support Community.
    I apologize for the inconvenience, but this is a peer-to-peer community for customers to connect and share solutions regarding their HP products.  It is not a venue to contact HP directly. If you have additional or direct feedback for HP about their products or services, please use the link below for alternate contacts.
    http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
    If you have other questions and concerns about using the forum, please feel free to send me a private message.
    Thank you.
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • DiskWarrior cannot replace the original directory due to Mac OS failure?

    I have a Powermac Dual G5 running 10.4.8. I have a Lacie Firewire 800 RAID attached.
    Lacie firmware is up to date and Disk Utility reports no problems with the RAID, either permissions or Repair/Verify disk.
    I have run the latest DiskWarrior 3.0.3 on the RAID (both from the boot volume and booted from the 303 rev39 CD) and it detects a formidable list of potential repairs to be done, creation dates on link files etc.
    It offers the next step which is to replace the existing directory with the pristine one it has just prepared.
    Every time I press 'Replace' it backs out, reporting;
    "The new directory cannot replace the original directory due to a MacOS services failure"
    (If I run DW when booted from the RAID, it replaces the normal boot drives directory OK btw)
    I do understand there used to be a bug in Mac OS Panther and an older DiskWarrior reporting similar to this but why now with 3.0.3?
    What does it mean?
    Google was no help. Maybe should have come here first
    PowerMac G5 2.5 - PB 12" 1.5   Mac OS X (10.4.8)   SE30, IIsi

    If lots of errors are reported, it is probably a good idea not to replace the directory. Wiring anything to the drives could make things worse. With Disk Warrior run from your boot hard drive, have it create the new directory, but don't try to write it to the disks. You can then use the new directory to copy files from the bad disks to another disk, or DVDs. It should give you a more accurate backup than the old directory, with its errors. Others have reported LaCie RAID systems failing, so get the data while you can. You could then reformat the LaCie with zeroing and see if it generates errors again, maybe running Disk Warrior daily. If your are lucky, the LaCie may be OK then, but I wouldn't trust it.

  • I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

    I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

    Have you looked on Lexmark's support site?
    http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

  • Why do I get "cannot replace temporary folder archive ''message when I try to download Firefox?

    why do I get "cannot replace temporary folder archive ''message when I try to download Firefox?
    == This happened ==
    Just once or twice
    == I try to download ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6; SLCC1; .NET CLR 2.0.50727; Tablet PC 2.0; .NET CLR 3.5.30729; .NET4.0C; .NET CLR 3.0.30729)

    I deleted the account on my ASUS email at settings. The ASUS appeared to delete the Yahoo email account, but when I clicked on the shortcut, my yahoo email had updated and everything looks good.
    Thanks for your suggestions!

  • Iphone 4s - Cannot Replace.

    my phone has a problem i dont know why its started on Dec. 31, 2013 - 11:45 PM before new year nice timing, i check the warranty on the apple site and its still.
    heres the story
    1.) I bought the phone brand new sealed in a buy and sell site here in the philippines called www.sulit.com.
    2.) When i bought it they give the sealed iphone 4s, that time i dont know the apple need the receipt when you go to repair center for repair or replacement
    3.) The seller is a guy the phone is from his father and the father recieve it from the smart communication give away where the father work.
    4.) When the problem occur i go to smart communication because they are the service provider for this phone and they say they cannot replace it they need the official receipt, i said to them that i dont have and i have no more contact to them.
    5.) I chat some of the tech support of apple the name is jenn, jocelyn and the senior advisor is nicole, i told to them that if we can use alternate solution to the problem like the box i have the box of the phone, but the senior advisor said im sorry sir.....im feel sad and mad.
    6.) And i recieved new Feb. 18, 2014 - last tuesday that the power mac center here in the philippines is Power Mac Center, an Apple Authorized Service Provider in the Philippines, has unveiled the iPhone Same Unit Repair (SUR) program that enables iPhone repairs to be done in the Philippines by its mobile device engineers. I call the center and ask that if they can replaced the wifi they said we cant sir the wifi is built-in together with the mainboard only 3 parts can replaced i forgot those three.
    THis is lesson to me but i rather choose another brand im kinda dissappoint that they can accomodate my phone for replacement

    Hi abyss123,
    I completely understand your frustration however every manufacturer needs to know when a product was purchased in order to enforce their warranty. Most companies require you to provide the proof of purchase or on bigger (mostly home electronics) send off a warranty card when you buy it so they know when it was purchased.
    I understand you bought a sealed iPhone 4S but Apple started making these devices in October 2011 so the device could have been purchased any time since then. Yes, there are ways they can see when the device was manufacturered etc but that not an indication of sale date. For example, if a device was built in October 2011 and sat on a shelf in a shop for 18 months before being bought. Their manufacturing date may suggest it was potentially bought a lot sooner than it actually was and the receipt would prove it was still under warranty.
    Hopefully this makes sense. Is there no way you can get the receipt from the retailer or download a copy from your e-mail or something?
    -Dib.

  • Frm-41826: Cannot replace group; columns don't match LOV

    Hi-
    I am Oracle ERP developer.
    frm-41826: Cannot replace group; columns don't match LOV
    this message absolutely don't know .
    please help me.

    If it is being created programatically, you may want to do a find on some of these key words..
    CREATE_GROUP_FROM_QUERY
    POPULATE_GROUP
    SET_LOV_PROPERTY
    They should all be within the same section of code, see what is going on in there.. The code may be trying to use a record group the LOV is not designed for ?

  • Internal hardware drivers needed for HP 2000 Notebook.

    Perhaps someone can help me pull a pawn shop "bargain" back from a life of exclusive Linux service.  The previous owner had appearantly attempted to retrograde the notebook from Windows 8 to Windows 7 using a Win7 recovery disc and an image of another computer. So of course the entire system, recovery partition and all, were formatted away and replaced with an unauthorized and broken install of Windows.  I'm OK running Ubuntu on if for now, but I will eventually want to install a fresh copy of Windows and can't find the internal hardware drivers for my HP 2000 Notebook (product number C2M42UA) anywhere on HP support website.  Before wiping away the unauthorized Win7 install I looked at the device manager and remember Realtec HD audio and Intel HD video and have located those drivers elsewhere on the web, but can't be sure what else I'll need.  I do seem to recall that with the bad install the ethernet adapter was without a driver, for example.
    Where can I find a list of drivers for which to scavange the web?  Looks to me as if a hard drive failure will leave any newer HP computer in worse shape since they replaced the recovery discs with a recovery partition on the hard drive it's meant to restore.  Something I should keep in mind in future computer shopping.
    This question was solved.
    View Solution.

    Windows 7 driver download page for your model:
    http://support.hp.com/us-en/drivers/selfservice/HP-2000-2b00-Notebook-PC-series/5296210/model/530508...
    Remember, when you buy a new laptop they do not give you recovery disks. That has been true for many years. However, there is a Recovery manager that will let you make those disks and if you do that and store them in a safe place you are always able to recover your system. Windows itself also now has very good backup tools including the ability to make a complete system image of the computer in its current state (not factory condition) so there is no real reason you cannot be fully protected against a hard drive crash. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Want All Drivers for Compaq 15-s005TX Notebook PC for Windows 7 32 Bit

    I Want All Drivers for Compaq 15-s005TX Notebook PC for Windows 7 32 Bit

    Hi:
    Try the W7 32 bit drivers and software from the HP Probook 450 g2 except the BIOS and firmware files.
    http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4053
    There is no W7 32 bit HP graphics driver for the nVidia 820M graphics, so try the one directly from Nvidia.
    http://www.nvidia.com/download/driverResults.aspx/83820/en-us
    You will need to install the Intel HD graphics driver first and reboot before installing the nVidia graphics driver.

  • Can I replace my CPU in my HP Beats 15 Notebook PC?

    I was wondering if I could replace my CPU for my HP Beats 15 Notebook Laptop as 1.70 GHz isn't enough for me. Thanks for responding.Aidan-S

    We're making progress. I still need your full model number so I can access the correct manual and also figure out what you have. Possibly you already have the best available AMD processor so there would be no upgrade path.  http://support.hp.com/us-en/document/c00033108

  • Webcam NX Ultra cannot load windows 7 drivers

    Hi please help - I was so excited to see the windows 7 drivers for my webcam NX ultra - but I cannot load them . Installation wizard gets to a certain point and then it says driver installation failed. I have tried unistalling the camera, unistalling anything with creative in the title in my registry - always same result installation fails - PLEASE HELP - if I cannot get this to work I will bever buy another creative product - my logitech camera which is 5 years older has windows 7 drivers and works fine. Com-on creative get with it

    Here
    http://support.creative.com/Products/ProductDetails.aspx?catID=218&CatName=Web+Cameras& subCatID=219&...
    but I see now it was not for windows 7 - it comes up when you do search and windows 7 guides you to the page...
    Looks like I will just buy logitech products in the furure :-(

  • K7N2-L cannot load MCP Networking drivers in Win98

    My system is new and consists of:
    K7N2-L mobo
    AMD XP 2500 CPU
    2 x 512 MB Twin Muskin DDR High Performance Black modules
    All in Wonder ATI 7500
    120 GB WD HD
    I think that I have set up my Bios correctly and have installed Win 98 without any problem. All drivers loaded ok from the included CD, except for the nvidia nforce MCP Networking Adapter.  
    Everytime I reboot my OS recognizes that the onboard networking adapter is present, but I cannot load it.
    I don't see that anyone has had this probem in this forum and wondered if perhaps it has anything to do with the MAC Address which is in the default (disabled) mode.  
    If I should have MAC Address enabled, how do I find out what Mac Address to use?
    I would be very appreciative of any suggestions anyone would be kind enough to make.
    TIA
    John  ?(  ?(  ?(

    Jef, first thanks for the quick response.  
    Yes, I'm using win98, not SE, which I had read somewhere else (after I loaded it)would not work.  Since all other drivers loaded properly I was hoping I would be lucky and it would be ok, but I suspected it might be my problem. Thank you for verifying it.  
    Also, in MSI FAQ it mentioned MAC address was on the ACR slot, but I didn't see it.  Your mirror suggestion was the trick, but I wonder why MSI puts it towards the case side so that it so damn hard to see?
    If I read backwards correctly, my MAC address is 0010DCE2D88B on what looks like a bar code sticker. I remember somewhere reading that the MAC was a combination of 12 letters and numbers which would fit this number.  Does this sound right to you?  There is also another sticker, but the writing is so small, I cannot make out what's on it.
    Since I'm this far along, and will need to purchase Win98 SE or XP, I will try putting in these numbers and see what happens and let you know (I'm not too hopeful though).
    Again, I appreciate your help.
    John  
    Quote
    Originally posted by jefn
    Hi John -
    Point of clarification: you have installed Windows 98SE?  The nForce chipset and drivers doesn\'t support the original Windows 98.
    Yes, you need to have the MAC address enabled.  The MAC address should be on a sticker on the motherboard.  You\'ll likely need a small mirror to read it as it\'s probably located on the side of your last card slot.
    Jef

  • Cannot find Win8.1 drivers for Qosmio X70-A-11L

    Hello,
    Lately I cannot find anywhere driver support for my model, X70-A-11L, no matter where I search for them. Does anyone know why Toshiba has removed these drivers and what are the alternatives?
    Thank you.

    Hi
    Please visit http://www.toshiba.eu/innovation/generic/windows8_1-message/
    There you will find all you need.
    Model compatibility check on Toshiba Compatibility Matrix and link for Windows 8.1 Drivers Page.
    Your notebook model is listed there.
    Good luck

  • Cannot connect on oracle drivers, but can with datadirect... Why is it?

    First, I used 10.2 drivers and got the same error as someone in this forum:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-12705: Cannot access NLS data files or invalid environment specified
    Of course, ojdbc14.jar, orai18n.jar and ons.jar were in classpath. Then I found in mentioned thread, that 10.1 drivers don't have this trouble. I've downloaded them (funny, but ons.jar was absent) - the program started swaring about absense of ons.jar. Then I added it from 10.2, and got the following:
    oracle.ons.ONSException: oracle.ons.oraclehome not set
         at oracle.ons.ONS.<init>(ONS.java:160)
         at oracle.ons.ONS.getONS(ONS.java:624)
         at oracle.ons.Subscriber.<init>(Subscriber.java:54)
    So, the question is: what the hell does this mean? I tried DataDirect drivers, and everything worked fine, but I wanted to use standard ones...
    And yes, the DB I use is Oracle Express Beta 2. Maybe, the answer is 42... sorry, "beta 2"?
    :))

    Well, I've solved the problem with 10.1 drivers (the reason was that I called before connection the following method - setFastConnectionFailoverEnabled(true);
    I thought it stated for fast reconnection on network failures). But the problem with 10.2 drivers persists. Of course, I can (and will) use 10.1, but the question is - whether the problem mentioned (ORA-00604,ORA-12705) is common for all those who use non-western locales?

  • Cannot find DAQ Assistant drivers..

    I'm trying to run a program written (I believe) on 7.1 however when trying to run the program I have a series of missing VI prompts. I have been able to locate most of these on the old hard disk and have pointed to them, however I cannot find the Configure DAQmx Assistant.vi required for the VIs in the program even though I have installed NI-DAQmx 7.2.
    I don't believe the other program was written with anything other than these resources so I'm a little confused. Was a later NI-DAQmx driver possible installed?

    Hey Karen,
    Firstly please ensure that you have installed the DAQmx drivers. You can download the latest version from the following link.
    http://joule.ni.com/nidu/cds/view/p/id/1614/lang/en
    Please check the readme file, to ensure that this software supports your version of LabVIEW (I am fairly sure that it does).
    As a rule of thumb you must always install the drivers AFTER you have installed the application developement enviroment (in this case LabVIEW 8.5.1). Once this has been been done, you will find the llb file in the following location.
    C:\Program Files\National Instruments\LabVIEW 8.5.1\vi.lib\express\DAQmx\DAQAssistantConfig
    You will find the DAQ assistant in the "functions pallete" on the block diagram, by navigated to Measurement IO >> DAQmx >>DAQ assistant - or by searching for the assistant.
    Best wishes,
    Rich R
    Applications Engineer
    National Instruments UK & Ireland

Maybe you are looking for