I cannot restart my iPad 2 with these messages (error # : 1603)

Hello all. I have a 3G iPad 2. When I restart the IPAD appears
[FTL:MSG] Apple NAND Driver (AND) RW
[FTL:MSG] FIL_Init [OK]
[FTL:MSG] BUF_Init [OK]
And the I tunes cannot restore my Pad
Someone can give me a hand?

Check the "Error 1603" paragraph here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Similar Messages

  • I cannot restart my ipad: how to solve it?

    I cannot restart my ipad: how to solve it?

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to book up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • TS3274 its almost 10 months,i purchased ipad2 32 3g wifi.itinially i got problem with applications shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs freq

    its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.

    If you have followed the standard Apple troubleshooting processes (see user guide )
    probably a trip to the local Apple Store Genius bar is called for before warranty runs out
    Assuming the iPad has been released in your Country if not you may have to take it to a
    neighbouring Country where it is available
    This page will tell you ,via the drop down menu Countries that can support iPad
    http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d

  • HT1553 Hi. My ipad froze with a message that iCloud hasn't been backed up in 11weeks. Please help with steps to unfreeze and back up the ipad.

    Hi.
    My iPad froze with a message "icloud backup" I clicked ok but it will not budge or unfreeze for me to do anything. I tried to power it off with no luck. Please someone help.

    You posted in the wrong forum, Snow Leopard.  You need to post in the iPad forums.  It's where the iPad users hang out at.

  • I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

    I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

    Hi Ablondel24,
    I understand that you are getting a 404 message when you access a website from a Mac, not a PC.
    First check the cache for the site:
    Reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
    OR
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    Second try to [[Delete cookies to remove the information websites have stored on your computer]]
    Let us know if this solves the issues you are having.

  • HT201210 in my phone when i open it appers a mesage with this message : error in application occured .error code : DF XX2700/6F1D WHAT'S THAT?

    in my phone when i open it appers a mesage with this message : error in application occured .error code : DF XX2700/6F1D WHAT'S THAT?

    i googled it - try a different sim card - did you go through a demagnetizer or something?

  • SCVMM Installation Failed: vmmServer.msi failed with Windows Installer error 1603.

    Error seen when attempting to install Microsoft System Center 2012 R2 Virtual Machine Manager 
    Installing D:\amd64\setup\msi\Server\vmmServer.msi failed with Windows Installer error 1603.
    See C:\ProgramData\VMMLogs\vmmServer.log for more information. After resolving the problem, retry setup.
    Searched the log file for 1603 errors - 
    CustomAction EnableWsmanCredSSP returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (B8:20) [02:00:47:180]: Note: 1: 2265 2:  3: -2147287035 
    MSI (s) (B8:20) [02:00:47:180]: Machine policy value 'DisableRollback' is 0
    Action ended 2:00:47: EnableWsmanCredSSP. Return value 3.
    SI (s) (B8:20) [02:00:47:228]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Server (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
    or error status: 1603.
    I've tried disabling my Firewall and troubleshooting the Enable-WSManCredSSP command-let however nothing has worked and I'm quite stuck. 
    Any help would be appreciated. 

    I had the same problem in my environment.
    Here are the steps how i did solve this issue
    Since VMM 2012 R2 Requires ADK 8.1 and this requires SQL 2012 Express.
    In order SQL Server 2012 to be installed successfully .Net Frame Work 3.5 feature on Windows Server has to be enabled first, in this case it is not not being installed by ADK Installation wizard as a result SQL service fails to start, which results on VMM
    installation to fail.
    Please try to enable .Net Frame Work 3.5 feature on Windows Server 2012 R2 before you install ADK 8.1

  • Cannot load any content from Appletv.  Message: Error - content not loading

    Cannot load any content from Appletv.  Message: Error - content not loading

    Hello yogac,
    The following article can help resolve many network issues that can cause symptoms such as inability to load content.
    Apple TV: Troubleshooting wireless connections
    http://support.apple.com/kb/HT1595
    Cheers,
    Allen

  • [Solved] There is a yellow triangle at the bottom of the screen with the message "error while signing in"

    Firefox Sync has been working fine between my home computer, work computer and my Android phone but suddenly my home computer has recently stopped syncing. There is a yellow triangle at the bottom of the screen with the message "error while signing in". I have checked passwords and codes on all three devices and check the sync versions are the same. All where correct. I have reinstalled both firefox and sync. I have even tried setting up a new sync account with a different user name but still the same problem. My work computer and phone sync fine but my home computer gets the error. Does anyone have any idea what could be causing this. Any help would be greatly appreciated as this is driving me mad!

    I have now discovered that if I manually disconnect (Tools / Sync / Disconnect) and then sync it works but only once. I seem to be able to repeat this manual process indefinitely. I thought that this might give a better mind than mine a clue.

  • I want to restart my iPad mini with retina display from scratch.  I can't

    I was trying to get some purchased apps onto my new ipad mini with retina display.  Problem, I can't seem to download everything so I want to start over.  How can I restart or reload my iPad mini?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT4623 I cannot get my ipad setup with correct password

    I cannot get my ipad4 setup with correct password. No ive tried resetting router password doesnt work...help!

    What setup password?
    Apple ID?
    WiFi connection password?

  • HT201184 i was updating my ipad & iphone with ios7 & an error came on

    i was updating my Iphone & Ipad with the new ios7  & an error came now both my Ipad & Iphone 4 are not updating both thescreen are black with the apple sign what i do now.

    only one can be updated at a time.
    try seeing if itunes see the ONE device and installs the ios 7

  • How set up new ipad air with mail messages from old ipad 2?

    How do I move mail from wife's old ipad 2 to her new ipad air 2?  After that I will clean off the old ipad and use it myself.

    Before erasing the old iPad 2 make a backup in iTunes or back it up to iCloud. Then when you setup the new iPad you will be given the option to restore from a backup.

  • Cannot install TEMPRO on a Satellite P100-488 error 1603 with Win installer

    Hello,
    I am writing this post as I have an issue to install the Tempro software on my Toshiba P100-488.
    Indeed, on the first screen, I get an error message reading "installation stopped prematurely".
    When I check in the events manager of Windows Vista, then I can see that error 1603 is there.
    Can you help me please ?
    Thanks in advance ! ;-)
    Fred

    Hi
    I searched a little bit on the Microsoft page and found this knowledge base article:
    +*You receive an "error 1603: A fatal error occurred during installation" error message when you try to install a Windows Installer package*+
    http://support.microsoft.com/kb/834484
    Microsoft article says that the error message appears because:
    +- The folder that you are trying to install the Windows Installer package to is encrypted.+
    +- The drive that contains the folder that you are trying to install the Windows Installer package to is accessed as a substitute drive.+
    +- The SYSTEM account does not have Full Control permissions on the folder that you are trying to install the Windows Installer package to. You notice the error message because the Windows Installer service uses the SYSTEM account to install software.+
    I recommend checking this document and try the workaround provided by Microsoft.
    Maybe it helps
    Good luck.

  • Can anyone advise on how to restart my IPad 2...It would not open my Emails so I thought I would restart it but after "swiping" it the cursor (star) simply sits there rotating

    I cannot restart my IPad 2 ... I tried to power down it but now cannot restatrt it.... The cursor is simply rotating ...

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for

  • Safari crashing and then quitting

    I have had a problem with safari in the last few minutes don't riley know what i did but i know it was me that caused it, i was wondering if you could help its quite a bad problem i suspect. Im 15 so a simple answer if possible would be better. I hav

  • TS2167 iweb not publishing

    Please can someone help with some useful advice.  I have just created a website for my new company, published to FTP server (not mobileme) and the first page is uploaded no problem (www.peakskiholidays.com) but if you click the link on any of the oth

  • Dummy XML not getting generated from empty file by J2EE adapter module

    Hi All, i know when XI gets an empty input text file, it does not generate a send message for it in sender communication channel. in my scenario, if i get a file with data, i have to generate an XML message for it using file content conversion - this

  • OBIEE 11G - Creation of Parent child hirarchy

    We need to create a parent child hierarchy for city wise branches In our DB we have only one table - the same we need to consider as Dimension & Fact. Attributes as follows: customername, customernumber, accountnumber,city, branch, financialyear,fina

  • OJMS Connection Factory Error

    Hi, (Platforms: OC4J developer preview 4, JDev 10.1.3 EA, Database :Oracle 10.1.0 ) I have tried to implement the JMS provider (OJMS) according to the following document : http://www.oracle.com/technology/sample_code/tech/java/codesnippet/jms/datasou