I cannot run the upgrade 10.5.1 om my mac it keep telling me to shutdown itunes which i keep doing but it goes no further and bombs out...told me to get support what do i do now?
what do i do now?
It's from Apple (Mac OS X Leopard Upgrade DVD). I have never gone to an outside source for repair or software (outside of Microsoft Office which is no longer on my computer since I have had these issues). This is the first time I have required help since my Apple Care ran out.
Similar Messages
-
at the top left corner of the tool bar, there is a 'back' arrow and a 'forward' arrow. before the latest software upgrade to firefox, i used a teeny tiny 'down' arrow that was to the right of the 'forward' arrow. when i clicked on the tiny 'down' arrow, it showed me a list of all the pages that had recently been opened; not just a website i might have been visiting, but all the pages i had navigated to on that website. i used the 'down' arrow as a shortcut to get back to a specific page which out having to click the 'back' arrow like ten times or more. i would really, really, really like for you to put that feature back, or tell me what i can do instead. thanks.
You're welcome.
-
how do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS X 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?
Retail Leopard disc looks like this;
(The disc itself has the same logo). If the one you've got is grey it simply won't work.
Given the retail and second hand prices of Leopard (usually some on Amazon MP), you'll probably find it cheaper to go directly to Snow Leopard, although there could be software updates and printer driver problems that could nullify the difference. -
Error message when trying to run the Upgrade for Itunes
I got a new laptop and to transfer my Itunes I downloaded the latest version of Itunes from the website (v7)
When I try to run the upgrade on my new laptop I get the error message - *This installation package could not be opened. Verify that the package exists and is accessible, or contact the application vendor to verify that this is a valid Windows Installer package.*
Can anyone help me and give me advice on how to get my itunes upgraded!!!!! I miss my tunes!Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
Dear Sir,
While i am calling Excel function through asp.net using Excel 2003 i was not facing any kind of issue it's working fine but while i am calling Excel functions through asp.net using
Excel 2010 i am facing an issue even after enabling the micro in settings . issue is
"Cannot run the macro 'YIELD'. The macro may not be available in this workbook or all macros may be disabled." please solve this as soon as possible .
Thanks & Regards
Sanjeev// I made a singleton class and calling that class to access Excel functions
Public Class Singleton
Private Shared objexcel As Excel.Application
Private Shared lock As New Object
Private Sub New()
System.Console.WriteLine("Instance of Singleton class created at : " & Now())
End Sub
Public Shared Function GetInstance() As Excel.Application
SyncLock lock
If objexcel Is Nothing Then
objexcel = New Excel.Application
objexcel.RegisterXLL(objexcel.LibraryPath & "\Analysis\ANALYS32.XLL")
End If
Return objexcel
End SyncLock
End Function
End Class
// Common Function for yield
Public Sub CalculateYield( _
ByVal YTMDate As Date, ByVal FaceValue As Double, ByVal Rate As Double, _
ByVal NonGovernmentFlag As Boolean, ByVal RateActualFlag As Boolean, _
ByVal MaturityDate As Date, ByVal MaturityAmt As Double, _
ByVal CouponDate As Date, ByVal CouponRate As Double, _
ByVal CallDate As Date, ByVal CallAmt As Double, _
ByVal PutDate As Date, ByVal PutAmt As Double, ByVal intFrequency As Int16, _
ByVal strOption As String, ByVal dblResult As Double, ByVal strSemiAnnFlag As String)
Try
Dim decMarketValue As Double
Dim intBasis As Int16
decMarketValue = IIf(RateActualFlag = True, Rate * FaceValue / 100, Rate)
decMarketValue = decMarketValue * 100 / FaceValue
decMarketValue = objCommon.DecimalFormat(decMarketValue)
MaturityAmt = MaturityAmt * 100 / FaceValue
MaturityAmt = objCommon.DecimalFormat(MaturityAmt)
CallAmt = CallAmt * 100 / FaceValue
CallAmt = objCommon.DecimalFormat(CallAmt)
PutAmt = PutAmt * 100 / FaceValue
PutAmt = objCommon.DecimalFormat(PutAmt)
intBasis = IIf(NonGovernmentFlag = True, 3, 4)
If strOption = "Y" Then
With Singleton.GetInstance
If MaturityDate <> Date.MinValue And MaturityDate > YTMDate Then
dblYield = CType(Singleton.GetInstance.Run("YIELD", YTMDate, MaturityDate, CouponRate / 100, decMarketValue, MaturityAmt,
intFrequency, intBasis), Double)
dblYTMAnn = CType(Singleton.GetInstance.Run("EFFECT", dblYield, intFrequency), Double)
dblYTMSemi = CType(Singleton.GetInstance.Run("NOMINAL", dblYTMAnn, 2), Double)
'End If
dblYTMAnn = dblYTMAnn * 100
dblYTMSemi = dblYTMSemi * 100
Else
dblYTMAnn = 0
dblYTMSemi = 0
End If
If CallDate <> Date.MinValue And CallDate > YTMDate Then
dblYield = CType(Singleton.GetInstance.Run("YIELD", YTMDate, MaturityDate, CouponRate / 100, decMarketValue, MaturityAmt,
intFrequency, intBasis), Double)
dblYTCAnn = CType(Singleton.GetInstance.Run("EFFECT", dblYield, intFrequency), Double)
dblYTCSemi = CType(Singleton.GetInstance.Run("NOMINAL", dblYTMAnn, 2), Double)
'End If
dblYTCAnn = dblYTCAnn * 100
dblYTCSemi = dblYTCSemi * 100
Else
dblYTCAnn = 0
dblYTCSemi = 0
End If
If PutDate <> Date.MinValue And PutDate > YTMDate Then
dblYield = CType(Singleton.GetInstance.Run("YIELD", YTMDate, MaturityDate, CouponRate / 100, decMarketValue, MaturityAmt,
intFrequency, intBasis), Double)
dblYTPAnn = CType(Singleton.GetInstance.Run("EFFECT", dblYield, intFrequency), Double)
dblYTPSemi = CType(Singleton.GetInstance.Run("NOMINAL", dblYTMAnn, 2), Double)
dblYTPAnn = dblYTPAnn * 100
dblYTPSemi = dblYTPSemi * 100
Else
dblYTPAnn = 0
dblYTPSemi = 0
End If
End With
End If
Catch ex As Exception
Throw ex
End Try
End Sub
// call yield function
GlobalFuns.CalculateYield(datYTM, decFaceValue, decRate, blnNonGovernment, blnRateActual, datMaturity, decMaturityAmt, _
datCoupon, decCouponRate, datCall, decCallAmt, datPut, decPutAmt, Val(Hid_Frequency.Value
& ""), "Y", 0, "")
this code is working in Excel 2003 but it's not working in Excel 2010
//Error is
Cannot run the macro 'YIELD'. The macro may not be available in this workbook or all macros may be disabled. -
Error launching office client : Cannot run the macro 'RegisterEPMXIIFn'
Error launching office client : Cannot run the macro 'RegisterEPMXIIFn'
I've been receiving the above error since last week. I've adjusted the macro settings in excel and tried reinstalling the epm addin numerous times and up till now i haven't managed to get it resolved. Really need someone to help me on this. Whenever i check in excel, the epm add-in is already enabled. Please let me know how else can i get to resolve this.Dear Rudy,
Indeed, could you please try the following suggestions:
In the Internet Explorer, go to : Tools->Internet Options-> Security->Custom Level, in section “Download”, check if the option “Automatic prompting for file downloads“ is enabled
In Excel, go to Excel Options-> Trust Center-> Trust Center Settings-> Macro Settings: check the
options “Disable all macros except digitally signed macros” and "Trust access to the VBA project object model"
Regards,
Siwar -
Cannot run the macro SOLVER.XLAM!MainEx error message
Ive had this problem for awhile but am now needing to use solver for my schoolwork.
Anytime i try to use the solver function under the data tab this error message pops up.
I have tried taking off and readding the add-in under options.
when i try to access solver in the visual basic panel it asks for a password which i have never set
Im running excel 2013 on windows 7
I have tried many things and am exhausted. No solution has been posted to this problem on the site or anywhere on the web
THIS IS NOT WHEN IM TYPING MACRO CODE IN VBA. its just when i try to use solver for simple spreadsheet calculations.
when i click solver i get the error cannot run module: SolverCode
when i try to access the solver code in vba a password is requiredHi,
As far as I know, the Solver add-in code has the password by design, it is protected on purpose and copyrighted. They are designed for use from the spreadsheet only.
Then, as the error message:" Cannot run the macro SOLVER.XLAM!MainEx error message." Please try to do the following methods to fix the issue:
1. Open VBE (Alt+F11)>Click Tools> References>set to SOLVER>Show immediate code pane (Ctrl+G)>Copy/paste (or write): application.run "solver.xlam!auto_open"
2. Disable the other Excel add-ins, such as
Adobe PDFMaker.
3. Repair Office 2013.
Regards,
George Zhao
TechNet Community Support -
I restored my pc and now it won't open itunes, when i try to, it reads " this version of itunes has not been correctly localized for this language. please run the english version." how do i fix this so i can open my itunes and back up my iphone?
Hey KEBENNETT,
It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally.
I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
Issues installing iTunes for Windows - Apple Support
All the best,
Jeremy -
Good afternoon. My iphone 4s used in Amerke another user. When you upgrade requests id and password. I can not get it, what to do?
As the previous owner of the phone or set up your own id and passwords.
You should have perhaps thought about all of these things before buying the phone. -
I am trying to upgrade to iOS 5 or higher. I go to General there is no where to upgrade
The Settings > General > Software Update option only appears when you have iOS 5+ installed, as you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC), and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
An iPad 2 will be updated to iOS 6.1, that is the only version that is 'signed' by Apple for it. -
I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!
As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).
-
I have installed Lion and Microsoft Office 2011. I want to uninstall Office 2004, but of course I cannot run the application to uninstall, because I get the "PowerPC applications are no longer supported" message. Suggestions?
Go to this microsoft site http://support.microsoft.com/kb/312172 and/or this microsoft site http://support.microsoft.com/kb/2398768. I would suggest removing both to start with a clean slate. I had some problems with installing Office for Mac 2011 over 2008 and found out that by completely removing both and starting from a clean slate provided the best solution. Kappy is correct but some sniglets do get left behind. Hope this helps. Cheers.
-
Cannot running the file suddenly
i can run any file before, but i dont' know why i cannot run the file suddenly. i just running a simple file as follow:
public class h {
public static void main(String[] args) {
// Display "Hello World!"
System.out.println("Hello World!");
i compile file successfully, but when i run the file , it display the following error:
Excepting in thread "main" java.lang.NoClassDefFoundError: hbet your h.class file is not in classpath.
-
Cannot load the Scrabble app for Facebook on my Mac; it starts, then I get this error message:
"FACEBOOK IS NOT RESPONDING. Facebook is taking longer than usual to respond. If this problem persists, refresh your browser or try again later."
I used this app for a few weeks on this machine, but now no amount of time and no number of refreshes will get the page to load. My ancient PC with Windows XP loads the app just fine, however - any ideas?
Thanks!!Any error messages ?
-
I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.
The current version of Aperture requires 10.7.5 or later.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
Maybe you are looking for
-
I have my daughters Ipod, my iphone, my wife's Iphone and Ipad on the one Apple ID. Since the latest update we are receiving Imessages from our daughter's Ipod with my wife's caller ID on the one message strand. Is it possible to differentiate betw
-
Preview PDF encryption is broken in Yosemite
I correct documents saved and distributed as PDF's. They contain personal information and have to be encrypted. In Maverick, and using preview, i could always print to pdf, choose to encrypt and assign a password. Then I could email the document. Now
-
Energy cut not installing 3000 g series 2049 55q on winxp
when i tried to install the energy cut in my newly bought laptop, it fails saying following error Feature transfer error Feature: HotKey Component: HotKey File: "C:\ Error: The filename, directory name, or volume label syntax is incorrect. OK
-
Data no getting populated from input help to target field
Hi , I have made a input help for a field. and have used the following code to populte the data into the input help.I am having the data displayed but the data doesnot get populated on selection. CASE cs_dropdownlb_data-fieldname. WHEN 'ZZSALSP
-
Hi, what are trouble shooting issues that we face in a real time environment while working on weblogic. how to apply fixpacks and servicepacks to weblogic. Finally, How do we migrate from weblogic 9.0 to 10.3. I dont find any material on how to do th