I cannot save after I place a small jpeg into illustrator CS6.

I cannot save after I place a small jpeg into illustrator CS6.

hey Jacob-
So I've tried creating a new document and pasting all of the artwork in that document. Nothing changed.
I checked all of the jpeg's I'm working with, resized some or made smaller etc. At this point I'm seeing no issues with the jpegs
and the illustrator file I'm working with....no stray points, did a clean up.
It's the action of saving the informatin to the file.  The spinning beach ball appears....forever. Weird, because I just had a job where I was
doing the exact same action and had no issues.
I also re-down loaded all of the jpegs. I'm recieving these from a dropbox folder, copied to my dropbox folder. I use dropbox to receive
files daily so I don't think that's the problem but maybe there is a problem in the transfer???
I have a call into Adobe at this point. Tomorrow I will recieve a call from their tech support.
Thank you for your help thus far and if you have any other suggestions I'm open to them. 
Martha

Similar Messages

  • Cannot save after download

    Refers Firefox V3.6.12. under Windows XP Pro SP3: I download an archived Word file and view but do not alter it, then I download a 2nd file but get message saying "cannot save - change file properties or save elsewhere". I get same problem even in Firefox Safe Mode, but not with Opera or IE8.
    Recently had a problem when an Acrobat Reader update automatically took place causing Firefox to be unable to open - cured by downloading again then also deleting plug-ins on that occasion. Cannot do a System Restore (attempt failed).

    the file is named with " Unconfirmed 23270.crdownload" .
    ".crdownload" is a name given to files incompletely downloaded by Chrome.
    I'd try doing the download using a different web browser. Do you have any better luck if you use Firefox instead of Chrome?

  • Preview cannot save after modified a jpeg file

    I open a jpeg file by using preview. After I crop the same image, preview does not allow me to save with the same image name, another name or even duplicate it.

    Not a preference thing.
    You can close the open document you saved the jpeg from without saving it. Then open the jpeg image saved from it.  If the layered image was never saved there will be no PSD file on your system for the layered state.  If you Flatten a new layer document  before saving it as a jpeg file. During the course of the save as jpeg the jpeg images file will become the backing file associated with the open document and the current document name should change from un-named or whatever to the filename.jpg you just saved.  New documents have no backing file till they are saved to disk.
    If you open a jpeg file and add layers the document becomes layered jpeg does not support layers so Photoshop would want to save a layer document as a layerd file.  If you flatten before the save. Save would default to replace the jpeg file currently backing the opened modified and flattened document.

  • Cannot copy and paste from an external document into InDesign cs6

    I am unable to copy and paste from "anywhere" into my InDesign cs6? Not from emails, word, or any other programs? HELP. thanks.

    You might find more accurate help here: http://forums.adobe.com/community/indesign (InDesign Forum)
    Copying and pasting is not usually a good idea. Try using the "place" command to place your external files or documents into InDesign. Nevertheless, you should be able to copy text from Word or other programs with no problem. How are you doing it exactly? Try to do it not only with keyboard shortcuts, but using the actual "copy" and "paste" menus on both programs.

  • How can I place a transparent psd into Illustrator CS4 without effecting my spot colors?

    So, I'm very naive about printing processes and am working with an online book building company. I've asked them how I need to fix this, but don't expect great advice from their design team.
    When saving in Illustrator, I've been receiving the error:
    "When spot colors are used with transparency, changing them to process colors outside of illustrator can generate unexpected results."
    This effected the printing because it left a halo in the shape of the placed transparent .psd. So I need to know how to flatten the transparent psd or something in order to not have it effect the colors below it.
    Thanks!

    Thanks Monika and John. I've been working in Spot colors simply because my client has limited my palette for the screen printing we've been doing on ceramics in the past. Now we want this book to match the colors on the ceramics. But if Pantone bridge back to CMYK would work, I'll do it. I have been saving to PDF by making a combined pdf directly from the .ai folder. My links are all embedded.
    Is there a way to convert all the colors in the document to CMYK at once? Otherwise I'm looking at a very long week.

  • Cannot find the right place to download the replacement for lost PS CS6 Extended

    My PC with Windows 8.1 became corrupted.  I reloaded the OS and thereby lost all of my apps.  I cannot find the right place to download the replacement Photoshop CS6 Extended app. 
    Under Download CS6 products  I receive an access denied error. 
    How do I download PS CS6 Extended?

    John70b the downloads do appear to be working.  Please try using a different web browser to begin the download process.

  • After migrating to a new MBP, when saving or opening documents, I sometimes (but not always) get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?

    I recently migrated from a MBP with OS 10.6 to a MCB with OS 10.8. Some glitches are popping up. Here's the one on my mind at the moment:
    When saving or opening documents, I get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?

    Since this is isolated to a single file, try exporting it to Interchange Format (.inx), then open and save the resulting file as a new InDesign file.
    Since the problem occurs during export, that may not be possible. Another option to try would be to copy all elements, page by page, and "paste in place" into a new document the same size. If you used layers, be sure to enable "paste remembers layers" in the layers panel menu.
    This kind of problem is often indicative of an underlying font issue. You said there are only three fonts, and you should verify that in Type > Find Font... Try replacing, at least temporarily the fonts in use with something else that you know to be reliable from other documents. You might want to do this before the other steps.
    Peter

  • After downloading Maverick I cannot save or email scans from my HP L7780. I receive  error message "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only. "

    After downloading Maverick I cannot save or email scans from my HP L7780. I receive  error message "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to.

    Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.

    Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.

  • Mms message comes up on my iPhone saying I need to enter my telephone number.  When I try to submit after entering I receive a msg saying I cannot save my tel. Number.  Why?

    Mms message comes up on my iPhone saying I need to enter my telephone number.  When I try to submit after entering I receive a msg saying I cannot save my tel. Number.  Why?

    Hi,
    Do you have iTunes 11 on your imac? What OS X do you have?
    Jim

  • After migrating to a new mac; iphoto library cannot save

    Hi,
    I'm faced with the problem that since the migration to a new mac; iphoto 11 cannot save any changes to the library. I can import, I can add an album, but if I quit Iphoto and start again every change is gone.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Why I cannot save image to camera roll after updated iOS 8.3 ?

    My iPhone6 was updated iOS 8.3 last Friday (2015/04/10) morning.
    After updated I found my iPhone sometimes cannot save image from any applications.
    At first it cannot save pic from Twitter and Tweetlogix. They said I had to change setting in Seeting>Privacy>Image and click allow button to save pic. After I did that it still didn't work, so I had to restart my iPhone and wait for 5-10 minutes to save pic.
    Not only saving pic from apps, but it cannot saving after taking pic too.
    I think iOS 8.3 is not stable. But it looks like only mine that got this problem so I ask if there is any way to solve this problem.

    OMg!!i had the same problem like just now and what I did was I went to settings, went to reset and then I only rest the location and when I went to google again, they asked me if I wanted to use my current location and I said yes and then I tried o save a pic and they asked me of they can access my pics and u have to say yes
    HOpe I helped

  • Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

    Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

    You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
    If you can find the problem page you would only have to rebuild it rather than the whole site.
    The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time.

  • Extractions from Searchable PDFs - Even After Auto-Tagging Cannot Save as PDF/A

    I'm currently extracting relevant parts from 100+ page PDF files, but cannot save the extractions as PDF/A if they come from a searchable version, even after adding auto-tagging via the Accessibility function, but I can do so if they come from a non-searchable version of the PDF. Is this normal? If so, how do I convert a searchable PDF to a non-searchable one so that I can save its extracted pages as PDF/A?
    After looking into this further, it now seems as though I cannot convert certain documents, whether searchable or non-searchable, into PDF/A. Could the person who sent these to me have saved them in a way to prevent conversion into PDF/A? This is a required standard for legal documents.
    Message was edited by: Paul Ulrich

    In Preflight, after I use "analyse and fix", three red X's appear next to
    (1) Convert to PDF/A-1a;
    (2) PDF document is not compliant with PDF/A-1a (2005); and
    (3) True Type font has differences to standard encoding but is not a symbolic font.
    Does this mean it could be compliant with PDF/A-1b, which would be good enough for legal documents (just need to be PDF/A)? However, with other documents that reached PDF/A-1b, when I open them, I light grey band appears at the top saying they purport to be PDF/A Compliant. That, however, does not happen with these documents... so how do I know if they are PDF/A okay?

  • When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

    When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
    THANKS LLOYD

    BARBARA,Yes, you are so right, I was deceived by the eve button,  Just tried it and it WORKS GREAT-Thanks for the help.
    THANKS AGAIN AND HAVE A GOOD DAY Lloyd
          From: Barbara B. <[email protected]>
    To: Lloyd Bennett <[email protected]>
    Sent: Tuesday, January 13, 2015 11:46 AM
    Subject:  When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
    When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
    created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Maybe you are looking for