I cannot scroll on internet sites.

When i get on an internet site. i cannot scroll up or down or sideways. i'm able to scroll on itunes or other apps but cannot scroll on any internet site.

Type '''about:config''' in the address bar and hit Enter key. When you see a warning, click '''I'll be careful, I promise!''' button
-> In the '''Filter bar''', type '''trackpoint'''
* right-click '''ui.trackpoint_hack.enabled''' preference, click '''Modify''' and change the value from '''-1''' to '''0''' (zero) or '''1'''
* click OK
-> Close '''about:config''' tab and Restart Firefox
Check which value (0 or 1) works.
Not related to your problem but do the following:
-> Update Firefox to the latest version 10
* [[Installing Firefox on Windows]]
-> Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Similar Messages

Cannot print any internet sites from Firefox but I can print from IE so I guess I will be back to using IE

I have been using Firefox for a long time and always update; however yesterday I noticed when I was on Amazon I could not print out confirmation. Went to various other sites, my bank, smart computing magazine, etc. and could not print. Got a message that said: Out of Paper, put paper in photo tray. I then went to IE and was able to print out anything I wanted. I always liked Firefox but I believe I have to change since I can't find an answer to my problem. Obviously my printer works if I can print when I use the IE browser. I notice other people have this problem also. I spend a lot of time searching on the internet.

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

Cannot upload to internet site if mastered on Waveburner!

I record for uploading only. I do not cut any Cd's. I find that if I master on Waveburner, I cannot upload to the website CD Baby. I can upload if I do it from the Logic bounce however. The problem lies in the limitations of what can be done in Logic as opposed to Waveburner as far as mastering goes. Am I doing something wrong (I've tried just about everything) or is anyone out there having the same problem? Thanks-Gergdog

I found that I had to make sure I was uploading a 16bit file. This is also the case with MP3 uploads so I convert mine with a compressor droplet. http://dl.dropbox.com/u/530960/MP3%20320K.zip This is for mp3's only

I cannot print from internet sites; IE and Word work perfectly

The problem has arisen a few days ago. All sites are affected

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

9300 and torch not seeing same internet sites

Sitting beside each oither, one has a Torch, the other a curve. Torch has Rogers, Curve has Fido. How come the Curve cannot access same internet sites as the Torch?

Many thanks for the help. I found an old "uninstalled" version of Norton's Internet Security 2010 that some how was impacting the 3.6.10 upgrade. I totally removed Norton's from the Auto Run folder, rebooted and Firefox loaded properly.

Unable to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later.

Hi,
I am in big problem. I had deployed a web application on IIS 7.0 which have windows server 2008 r2 installed. We have some reports in web application. Everything is working fine in web application except when I export content feom SSRS reports to PDF or CSV
format then I am getting following message
Unable to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later.
This message comes only on IE8 as I had installed Mozilla but that issue is not coming on Mozilla. I don't why this issue is coming and how to solve this issue. I had gone with every possible results which I found in google but noting seems to be helpful. Please
help me as it's urgent and I am deploying on production server.
Thanks...

Hi Awadhendra,
This error usually occurs if IE is configured with the "Do not save encrypted pages to disk" advanced options setting or the server is using Secure Sockets Layer (SSL) and has added one or both of the following HTTP headers to the response message:
e.g: Response.AddHeader "Cache-control: no-cache" or “Cache-control: no-store”.
To solve this issue, please try to cancel the “Do not save encrypted pages to disk” option in the advanced internet options or setting the “BypassSSLNoCache” registry. For more details, please refer to
KB323308 .
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Safari Message: "Internet Explorer Cannot Display the Web Site" ?!?!?

Safari is running strangely on my new MacBook Pro. It has decided to NOT automatically add .com
when I type an address ..... THEN, when it can't find the website I get the message
"Internet Explorer Cannot Display the Web Site". ***.
Could the IE I am using when I'm using Windows XP (via Bootcamp) have corrupted Safari somehow?
Ideas, please! Thanks.

I found that the DNS settings in system prefs> networks > advanced had been mysteriously changed to something rather "foreign". An archive and Install solved the problem. Did your client happen to install a program called "Glim" (a Safari "enhancer"). That's our suspect.

Got my ipad mini. It works perfectly fine until I updated to ios 6.0.2. Now I can't connect to wifi. I've tried every solutions offered in every forums and internet sites but nothing happened. Still ipad cannot connect to wifi. HELP!!!

Got my ipad mini. It works perfectly fine until I updated to ios 6.0.2. Now I can't connect to wifi. I've tried every solutions offered in every forums and internet sites but nothing happened. Still ipad cannot connect to wifi. HELP!!!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Safari cannot find the internet plug in

I have a new Intel iMac that initially had no problem surfing any web site. I now have a problem with any page that contains "shockwave". As and example when I try to got to www.autotoll.com.hk I get stopped by the following message...
++Safari cannot find the internet plug in++
++The page “Autotoll” has content of MIME type “application/x-shockwave-flash”, but you don’t have a plug-in installed for this MIME type. A plug-in should be available on this page:++
++http://www.macromedia.com/go/getflashplayer++
++Do you want to open the page?++
I have gone to macromedia numerous times and tried to download and install Flash Player 9. I still get the same message.
I have also tried using FIREFOX and get the same message.
How do I install Flash Player 9 properly??????
HELP!!!

Re: FLASH 9 won't work with Safari 2.0.4 or Firefox (A FIX!!!)
Posted: Aug 24, 2007 4:44 AM in response to: threejay10
threejay10,
thanks for pointing me to the other discussion thread on
http://www.justin-cook.com/wp/2007/03/08/flash-9-doesnt-work-on-mac-os-x/
i am not that comfortable in Terminal so I opted for the one other option i could see that doesn't reliance on me typing a slew of sensitive characters into Terminal.
So, instead, I downloaded Pseudo from VersionTracker
http://versiontracker.com/dyn/moreinfo/macosx/9608
installed it in my applications folder. then dragged the Flash 9 installer onto Pseudo. Flash then installed perfectly and all is working well.
It seems there is a simple fix after all. Apparently Pseudo installs into the root and therefore, I assume, bypasses the permissions issues. After 2 days of trying to solve this, I"m happy it's over. Thanks again for pointing me in the right direction. I hope others can find this thread and the solution.
Cheers, TM

How can I print more than one page of an internet site?

When I try to print pages from internet sites (Facebook, Merchant Circle, Linked In, NBC.com, etc.), Firefox will only print the first page.
In order to print more information, it is necessary to reduce the scale of the print so more of the information will print on the first page.
How can I print out more than just one page of a website without having to make the print so small that I cannot read it when it prints?

Firefox has problems with some style rules.
First, it's always helpful to use any print-formatted or print-optimized version of the page. Sometimes there is a link for this.
Second, in some cases you need to use this trick: press Ctrl+a to select all content on the page, then Ctrl+p to display the print dialog, and click the radio button next to Selection.
Those tricks don't always work, but hopefully they will help.

Cannot connect to internet in Solaris 10 OS.

I setup X4500 running solaris 10 OS. But, I cannot connect to internet. I do not understand whats wrong with that. When I ping google or any other site from X4500 its not transferring any packets. I can ssh it from a remote computer. So, running fine on the network. I have a static IP for that. Could someone please help me with this.
Thank you

Can you ping your own default gateway's IP address?
Can you traceroute to a public IP address like forums.sun.com (72.5.124.102)?
Can you use nslookup to resolve hostnames to IP addresses?
Does your /etc/resolv.conf have lines like:
nameserver 192.168.0.10
Where 192.168.0.10 is the IP address of your local DNS server(s)?
Did you copy /etc/nsswitch.dns over /etc/nsswitch.conf before trying to reach websites?
I hope investigating these questions help.
regards,
~ Dairenn

Cleaning the "cache" of internet sites (URL's) stored

How do I clean the "cache" of internet sites (URL's) stored on my computer?
Where are cookies stored?
I cannot find where these are stored, though a technician showed me once.

Under Safari's History menu select Clear History at the bottom of the listing.
To clear Cookies open Safari Preferences > Privacy and locate the button to clear cookies.
If you enable the Develop menu then you can empty all caches from it. Should find that under the Advanced icon in the preferences toolbar.

Can i make a button change anchor link when you scroll down the site?

I am trying to make a scroll site.. and i have navigation buttons on the right, a full menu, but also a "1 topic up" button and "1 topic down" button.
Is there any way that i can have those buttons change anchor link when you scroll down the site.
Example:
I am at home, then i press "1 topic down" and gets scrolled to the next topic on the website, but then i cant make the button change to link to the anchor below that, so the button becomes useless after that 1 press.
Is that in any way possible in Muse to make it change link?

Hi
You can try to create different buttons on page positions where down scrolling will be active with separate button actions. For example you click on "I topic down" , page scrolls and there is another button placed with "Next Topic down" , on click this would scroll the page more and similarly along the length of page.
Button with anchor link scrolling down the page cannot be used for different anchor links, creating different buttons with anchors is the solution.
Thanks,
Sanjit

Azure Virtual Machine cannot connect to Internet addresses following update on 8/7/2014

I've got a Windows Server 2012 virtual machine running in Azure that prior to system updates that were rolled out last week could connect to Internet addresses such as Yahoo.com without issue. I do not currently have any virtual networks configured for this
Azure tenant nor have I modified any of its network settings, so the VM was making the connections with its default network configuration. On August 7, 2014 I rebooted the virtual machine to apply some required system updates to the operating system, and following
that reboot the VM could not longer connect to the Internet. I am able to lookup domains in DNS, but cannot ping those domains from the command line or open web sites via a browser.
I've released its IPconfig via the command line and rebooted the server multiple times, both from within a remote desktop connection and from the Azure Management Portal, but these actions have not resolved the issue.
Are there additional configuration steps I need to take to reconnect this VM to Internet sites, or has something changed which requires me to make further changes?
Thank you,
John
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

Just to close this out, I've been able to resolve the issue. It looks like somehow a Windows Update changed the proxy server settings in Internet Options on the server, and that was preventing traffic from successfully leaving the server. Once I removed
that setting, the issue was resolved.
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

IPhone/Safari can't navigate Internet Sites with Frames.

Here's a riddle for all you mega-geeks out there...my iPhone 3G can't function on an Internet site I use that has Frame type navigation (navigation links are in a separate window on the left, the main window always shows the homepage address in the browser no matter what page you go to). When I go to this site,(it's a local estate-sales site) and try to navigate beyond the home page, the icons/links in the navigation frame are displayed as little boxes with "?" marks on them, there is no way to get in to any page past the home page. Is there a way to configure Safari to be able to deal with frames?

Hi, Thanks for the input...it may be the way the site in question is coded that makes the navigation frame unusable. I tried using a different site that uses frames, and that site works fine. In case anyone wants to see what I'm talking about, the site my iPhone cannot get into beyond the home page is estatesale-finder.com (a handy site if you happen to live in the Portland area and like estate sales). This site comes up and works fine on all my PC machines...it is only the iPhone that cannot naviagte on the site. Thanks...

I cannot scroll on internet sites.

Similar Messages

Maybe you are looking for