I cannot see the download page when i click on the process at the upper right corner of the browser, is it normal?

I have asked to download a video from an online grabber. It started downloading and the process was showing how much time was left (on the display showing download process) the icon next to the HOME icon on the upper right side of the browser.
I usually click on the icon and it gives me the option "show all downloads". It wasn't working and this is not the first time!
Last time i had to stop a giant download and i couldn't. Even when i restarted FIREFOX it was still running in the background.
I knew this because when i came to close all tabs it said "this will cancel current download".
I had to REINSTALL from ZERO the Firefox.
But now i have this problem where i can't see all the download page. This is the second time and i think it is related to the online video grabber.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Similar Messages

  • How to achieve SUBMIT for the current page when I click other tab?

    Problem: How to achieve SUBMIT for the current page when I click other tab?
    Description: I have a two-page application and each page associates with a tab. Say page1 associates tab1 and page2 associates tab2. In each page, I have a submit button, a after submit process associated to the submit button, and a tabular form. For page1, I fill out the fields and hit the button. The page1 will appear again and I can see the data I have insert. However, If I fill out the fields and click the tab2 (page 2) instead. when I come back to page1, the data I filled out are all gone. Is there any way in HTML DB to force the submit in the current page after you click other page. If use JavaScript, what is code looks like.
    Appreciate your time and your answer.
    Mike

    Scott,
    just for clarity, if I understood correctly what you said there are two possibilities:
    1) keep the standard tab branch and give up the possibility of validating page items. Below you can find an example of such cases.
    2) Replace the template substitution string and perform a "custom" button-like submit also adding a branch to the main page associated with the tab. Page items will be validated if the branch firing point is set after the validations.
    I couldn't find an example of the latter, but I found easily an example of the former:
    it's the "Report attributes", page 420 of app 4000.
    If you enter 'aaa' in the "Number of rows" form field and then you press "apply changes", htmldb correctly displays an inline error message saying that the value must be numeric. On the contrary, if you click on the "Region Definition" tab, htmldb takes you to a page showing an oracle exception:
    ORA-20001: Error in DML: p_rowid=4785927011172906402, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value aaa for column PLUG_QUERY_NUM_ROWS
    Bye,
    Flavio

  • I can't see the "plus" sign in my upper right corner ind the calendar!?

    I can't see the "plus" sign in my upper right corner ind the calendar!?

    In my database connection i can`t see the plus sign on the
    database tab.
    Not quite clear to me what you mean by that. In any case, you
    should configure the data source in the Coldfusion Administrator.
    Open the CF Admin page,
    http://127.0.0.1:8500/CFIDE/administrator/index.cfm
    . Go to the
    Data Sources section. Create a new datasource, for example,
    by entering the following
    Data Source Name:
    eventplanning
    Driver:
    Microsoft Access with Unicode
    Press the
    Add button. Enter the value
    Database File:
    C:\CFusionMX\wwwroot\cafe_townsend\contact\coldfusion\eventplanning.mdb
    Press the
    Submit button. Coldfusion will then verify the connection to
    the database. Confirm that its status is
    OK. If so, the eventplanning datasource is configured for
    use in your Coldfusion application.

  • I have garage band on my I pad and from what I can tell I have done everything right with the latest versions and icloud turned on for the app and phone. I have a cloud in the upper right corner of the song but when I go to my icloud drive on a brows

    I have garage band on my I pad and from what I can tell I have done everything right with the latest updates and icloud enabled on the i pad and app. A cloud is in the upper right corner of the song but when I look on my icloud drive on a internet browser on my PC it is not there. Any reason why?

    Bring your phone into Apple for evaluation

  • I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps

    I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps are so that i can update them. Please give some solutions please

    isthisonetaken wrote:
    I'm having this problem. It started yesterday. I have 2 updates, but when I open the App Store, they won't appear.
    Do you have apps purchased with a differnt AppleID?
    For example, mine shows 12 updates but only 2 show up as being available.
    The others are on my daughters account.
    I log out of my iTunes account and log in with hers and those updates show up.

  • What does a 2 on the upper right corner of the Mail icon mean?  When opened, the app is essentially blank and unresponsive.  We've been using Mail for weeks.

    What does a 2 on the upper right corner of the Mail icon mean?  When opened, the app is essentially blank and unresponsive.  We've been using Mail for weeks.

    Thanks.  I used an Apple in 79-81, and got the first PC in EDS (Ross Perot) in Jan, 82.  Installed corporate email in 83.  Now have 4 pcs in a house of 2 people, supporting our 5 kids and 15 grandkids.  The iPad is what it took to get my wife to use her own email address.  I should have known about the red circle - my bad.  I did get fixed with a reset.  Vern Olson

  • HT5362 How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?

    How to move the banners from the upper right corner to the low right corner of the screen on Mac (Mavericks)?
    Sometimes, when I am about to click something in the upper right corner, the banners stand in the way. It is very annoying.
    However, I still need them and it is not an option to completely turn off notifications.
    Has anybody faced the same problem?

    Yeah, i've been playing around a bit with Notifications, and not being able to move there location is very annoying. The default location  normally means it is covering one or more tabs in Safari (or any tabbed application for that matter). Might have to try Growl again.

  • What is the fourth control button in the upper right corner of the FF 4 window?

    I had to reinstall FF4 during a virus cleaning process, and there are now 4 control buttons displayed in the upper right corner of the window. From the right, there's the usual "Close" (red), "Restore down" and "Minimize" buttons (both blue), and then there's a fourth, green button, with no "ToolTip" associated with it. What's the behavior of this new button?
    I'm not normally this curious, but I've just had a battle with the "Antivirus Antispam 2011" malware, and am very sensitive to new graphics that I don't recognize.
    I'm running XP Pro.
    Thanks!

    I've found over the past day that its presence comes and goes, presumably based on background apps.
    As I'm unable to predict when I'll catch it next time, it's best I close this question and I'll reopen a new question when I can provide a screenshot.
    Many thanks for your response, and I'll watch for its reappearance.
    John

  • What is that mysterious "X" in the upper right corner of the Viewer?

    I am new to Final Cut Express, and have a couple of questions that I have not yet seen addressed anywhere.
    First, I am encountering an "X" within a white circle (more or less) in the upper right corner of the Viewer at various points during playback. It does not seem to correspond to anything in particular, as far as I can tell. I have checked the documentation, but there is no mention of it (that I can find); similarly, it does not seem to have come up in any of the discussions, or in anything else I've found online.
    My second question requires a preface: The particular file I am working with is one that I have had to extract from a DVD in Toast and export as a QuickTime file in order to work with in Final Cut Express. Initially, I exported the file with uncompressed video; I got really smooth playback in FCE's viewer, but discovered (insert sound of slapping forhead here) that the QuickTime file I had created was about 125 GB (the video is just under an hour long). Since that clearly was not going to be a viable proposition for long, I went back and tried exported from Toast using H.264 and then MPEG-4. Both resulted in much more reasonably sized files, but playback in FCE is not terribly smooth.
    So, the second question is: What are good settings to use when exporting as a QuickTime file? I'm basically looking for minimal to no loss in video quality, reasonable file size, and smoother playback in the FCE viewer. I realize that this is partly going to be a matter of opinion; I would just like to know what folks with more experience in this area think.
    Thank you very much!
    Kevin
    iMac G5 Mac OS X (10.4.8) 2 GB RAM, FCE 3.5.1
    iMac G5   Mac OS X (10.4.8)   2 GB RAM, FCE 3.5.1

    That does explain the X. Thanks!
    The reason I'm exporting in the first place is that a friend of mine wants me to fiddle with the rough cut of his video project a bit, and burn the results back onto DVD. (I think he thinks I can do more than I actually know how to at this point, but I figure that playing around with it is a good way to familiarize myself with the application.)

  • 27'mac upper right corner of the screen

    March 5, 2010 purchase of IMAC 27, upper right corner of the screen there are yellow. Aftersales staff explained that because the entry of dust, should I bear the cost of repairs. I am very atmosphere!

    I recently noticed what looks like dust UNDER the glass at the top left and right corners, as well as a blotch on the LCD itself about 2” x 3” which is only perceptible when you are looking at a white background.

  • Edit does not appear in upper right corner of the main screen in camera roll of my iPhone 4S.

    Edit does not appear in upper right corner of the main screen in camera roll of my iPhone 4S. My software is the latest ver. 6.1.3 and I know it is supposed to be there because we have other iPhone 4S phones and it is there on them.

    I mean chip

  • Lightning calendar and task tabs interfering with Ultramon icons in the upper right corner of the window.

    As I today reinstalled Thunderbird and Lightning, I discovered, that the 2 small tabs (Calendar and tasks) in the upper right corner of the window is interfering with the icons at the same place from the program Ultramon, that i use because I now are working with 2 displays.
    Are there any way to move those 2 tabs a little further to the right?
    It is not a very big problem, but a bit annoying to click at the tasks tab, and the window jumps to the next screen.
    Any easy solution?

    ''hbirch [[#question-1048136|said]]''
    <blockquote>
    As I today reinstalled Thunderbird and Lightning, I discovered, that the 2 small tabs (Calendar and tasks) in the upper right corner of the window is interfering with the icons at the same place from the program Ultramon, that i use because I now are working with 2 displays.
    Are there any way to move those 2 tabs a little further to the right?
    It is not a very big problem, but a bit annoying to click at the tasks tab, and the window jumps to the next screen.
    Any easy solution?
    </blockquote>
    Rubbish !! Of course I meant move to the left - sorry

  • Why does it bring me back to the top page when I click on the open pages?

    When I have Pages open and I am typing on it, If I go onto another program when I click onto Pages it brings me to the top page when I was at a lower part.

    Probably depends where you click when you go back to PAges.

  • My photos don't rotate anymore when I flip my phone and I notice a new icon symbol in the upper right corner of the screen that looks like a lock with a 3/4 circle going around it. Any ideas???

    My photos don't rotate anymore when I flip my phone and I notice a new icon in the upper right corner that looks like a lock with a 3/4 circle going around it.
    Any ideas???
    Thanks

    A Icons and their meanings are covered in the manual ( orientation lock included)
    iPhone User Guide (For iOS 5.1 Software)

  • My iPhone recently dropped and it left a big chip on the upper right corner of the plastic on the front screen on my iPhone. How would I repair this? I am still in warranty

    My iPhone recently dropped and it caused a huge chopin the upper right corner of my iPhone 4S' front screen. I have OCD, and this is very bothersome. How would I fix it? I am still in warranty.

    I mean chip

Maybe you are looking for

  • Can't get video to show up when Export Media

    Not sure what kind of noobie mistake I'm making, but when I try to Export a clip to video in Premiere Pro CS4, (via File>Export>Media>and then selecting flv or h264), I'm not getting any video output.  The audio comes across fine, but the screen is b

  • Convert ABAP Report to HTML & Send External Email Attachment

    Hi, I have a requirement described as below. A report is scheduled to run in the background creates a spool, to be converted to HTML format and send to Third Parties (External Email ID's) via Email. Please let me know whether the requirement is not c

  • Creating MailBox-enabled Users In Active Directory Using JNDI

    Thanks to the Various code samples i have come across in this forum i have been able to use the JNDI API to add a new user to the Microsoft Active directory. The user account that was added using a combination of the various code samples was already

  • FCP7 crashing every 10 minutes

    Hi there, Just wondering if anyone out there can help me make sense of this error message so that I might go about fixing my constant crashes. Many, MANY thanks in advance.  I am desperately trying to work under a deadline and this is making things v

  • Inventory Valuation by FIFO method.

    Hi All,      We need to know if it is possible to get any report where in we can know what would the inventory valuation be if inventory is to be valued by FIFO method. Currently the valuation method is moving average. We need this for year end purpo