I cannot see the yellow motion path in the composition window

Yesterday the motion path was visible after unchecking and rechecking the motion path box in view options. But today it's not visible after trying several times the same thing. I'm trying to animate text using a path animation preset. I'm using an Imac with 24 gigs of ram and After Effects CC.
I am very new to this program so I could be missing something very simple. Please help if you can.
Thanks,
Surya Mayee

You may have pressed Ctrl/Cmnd + Shift + H and hidden all handles. Try resetting your workspace. Give us a screenshot of the whole project and don't scale it down. You can use this forum to upload the image by clicking on the camera icon. If the upload button does not light up then close the window and try again. Sometimes the upload window is buggy in Safari.
If you are new plese go through these 3 basic tutorials: AE Basics

Similar Messages

I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?

I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?

Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking. Filters are basically ignored by the tracker. Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker. Did you change the timing after doing the tracking? If so this would also require you to re-track the shot. Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
Cheers!

I have bought a Macbook Pro Retina, and the iPhoto which comes with it, has a different iPhoto Book menu. I cannot see how to put text at the bottom of the pages of photographs, instead of the default place in the middle. Is there a way to do this?

I have bought a Macbook Pro Retina, and the iPhoto which comes with it, has a different iPhoto Book menu. I cannot see how to put text at the bottom of the pages of photographs, instead of the default place in the middle. Is there a way to do this?

There are different templates for iPhoto books and they differ from version of iPhoto to iPhoto, so explore the other options.

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

Hey there MattSK123,
Thank you for your question. It sounds like you are unable to see either of your devices in the sidebar of iTunes after a recent update. A number of issues could cause this type of behaviour, and would recommend starting with the troubleshooting from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If the issue is not resolved, I would next re install iTunes from either of the following articles depending on the version of Windows you have:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Or
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thank you for using Apple Support Communities.
Take care,
Sterling

How do I set the default file path for the Place command?

I keep my graphics files for each document in a particular folder. Every time I open an existing InDesign document and place a new image I have to browse back to that location - even though all of the previous images in that document came from the same folder. InDesign does not remember the file path that was used previously in the document. This is very annoying.
IS THERE A WAY TO SET THE DEFAULT FILE PATH, OR LOCATION, FOR IMAGE FILES?
I have looked through the preferences, searched the forums and internet, but I have not found any reference to setting default paths. Is there a setting like the one in MS Word called "File Locations" on the Options toolbox?
Thank you.

Since you're working in ID on Windows, you can take advantage of a neat trick in Windows. Copy the file path out of the File Explorer address bar and paste it directly into the Place filename field. That will jump you directly to the desired volume. For example, let's say I want to place a graphic located at X:\PS Jobs\May PS\709672bp\Working Source Files\Links. I copy that entire path from the File Explorer address bar, go to InDesign, select File|Place, and press Control + V to paste that path into the filename field. I press the Open button and Shazam! I'm there instantly, without a bunch of navigation.
You can do the same thing in the File|Save As and File|Export fields. Let's say you want export a PDF file from InDesign to the volume X:\PS Jobs\May PS\709672bp\Working PDF Files. First copy the desired file path from the File Explorer window. In InDesign, select File|Export, click anywhere in the filename field, and press the Home key to move the insertion point to the front of the filename. Press Control + V to paste that path in front of the filename, then add the backslash character (\). The filename will now look like this: X:\PS Jobs\May PS\709672bp\Working PDF Files\Filename.pdf. Press the Save button to bring up the Export Adobe PDF window. Select your desired PDF preset, press the Export button, and the PDF file will magically appear in the desired volume.
This sounds really complicated, but it's not. In practice, it only takes a few seconds. I probably save an hour's worth of needless navigation every day with this technique.

How do I get the full current path in the title bar of a terminal window?

Is it possible to get the full current path in the title bar of a
terminal window? I would find that more meaningful than
"Terminal - tcsh - 80x60" (which I currently get). Doing
this would free me from wanting to display the path in my
system prompt thereby allowing me to use a shorter prompt
and having more space on the line for actual input.
Thanks
Ron
Dual 1Ghz PowerMac G4 Quicksilver 2002 Mac OS X (10.4.8)

IIRC, Terminal->Window Settings->Window controls that information. That said, I don't understand what full current path means in this context, nor why you'd want to display it in title bar.
Your terminal prompt is a concatenation of your computer name (SysPrefs->Sharing—easily changed) and the path to your user's home directory using the short username (hard to change).
computer name:~ username$

Unable to determine the install root path for the LabVIEW Runtime Engine

Hi,
i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's. In case of this there's also no support directory generated by the build process.
I have no idea why it doesn' work. I hope anyone can help me.
Thanks in advance
Kay
Attachments:
Debug.zip ‏75 KB

This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
Please read the following:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

[svn] 3159: fix to target the correct player in the external library path for the packaged build file

Revision: 3159
Author: [email protected]
Date: 2008-09-09 12:53:37 -0700 (Tue, 09 Sep 2008)
Log Message:
fix to target the correct player in the external library path for the packaged build file
Modified Paths:
flex/sdk/trunk/frameworks/build_framework.xml

Hi Gaurang,
Were you able to resolve your issue?
Hope the following links help:
/message/7579461#7579461 [original link is broken]
Re: Required JAR files:
Regards,
Dao

For preparing the filenames and paths for the oracle database files..

Hi,
I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
Controlfile ---- > select name from v$controlfile;
Redologfile -- > select member from v$logfile;
Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
Tempfile --------> select tablespace_name,file_name from dba_temp_files;
Spfile -----------> show parameter spfile
Pfile --------------->
Passwordfile ---->
tnsnames.ora -->
listener.ora------>
sqlnet.ora ------>
oratab ------------->
Thanks
Shiju

orashiju wrote:
Hi,
I am preparing the filenames and paths for the oracle database files.....but I am not able to complete this one...Will you Please help for filling this one.
Controlfile ---- > select name from v$controlfile;
Redologfile -- > select member from v$logfile;
Datafile --------- > select tablespace_name,file_name from dba_data_files order by 1;
Tempfile --------> select tablespace_name,file_name from dba_temp_files;
Spfile -----------> show parameter spfile
Pfile --------------->spfile and pfile are located under $ORACLE_HOME/dbs/
Passwordfile ----> passwordfile is located under $ORACLE_HOME/dbs
tnsnames.ora -->
listener.ora------>
sqlnet.ora ------>all above files are under $ORACLE_HOME/network/admin
oratab ------------->depends on operating system. Usualy under /etc/oratab

Imported Photos keep freezing during a motion path across the screen

Today is the first day I am using Motion since upgrading to Leopard about a month ago. I am working on a project where I have various photo images floating around or across the screen. For some reason, I keep getting hiccups when the image moves across the screen. It moves, then pauses for a second or two then continues on. I scaled the image down, added a motion path and a Fade in/Fade out behavior and that is it.
I am not sure if it is a Leopard thing or something I need to adjust in the parameters but I have used Motion plenty of times before the upgrade and it never paused in the middle of move. Its annoying pause. At first I thought it kept hitting a spot on the timeline that needed to be rendered but I keep looping the timeline and it keeps pausing at the spots. Not every picture does this either.
I have enough memory to run the whole Final Cut Studio with no problem so I am still not sure what is up. I may just export it and see if it corrects itself.
Any suggestions you all may have will be appreciated.
C.

In the Motion manual or tutorial or something from Apple, they tell you to put one of the Glow filters on a clip, saying that no system could play it back full speed. So you have enough to run the programs, but that doesn't mean you have real time playback.
Here's a tip- right click the bar right below the toolbar, and check "Frame Rate" in the menu. Now, when you play back your video, it will tell you how many frames per second it is playing back. It will play every frame (this is not how FCP works).
So if you aren't getting smooth playback, RENDER! Then you can see how it will play when exported.

Cannot see my external hard drive on the desktop

Hi,
I am at the tail end of a large documentary project on FCP. Suddenly, this evening my external hard drive (Maxtor One Touch III, Turbo Edition, 1.5TB) becomes sluggish. I shut down (all properly) and restart and the external hard drive is no longer on the desktop (does not mount and cannot be seen anywhere).
I change ports (from one FW400 to another), try connecting to a different Mac (was running on an iMac, try connecting onto a G5) and still cannot see the hard drive. I try connecting using USB2 and still cannot see it on the desktop. I run disk utility and the hard drive shows up in menu on the left, I am able to run "verify disk" as well as "repair disk" - hard drive is fine, no errors no problems. However, I still am not able to access the drive - just does not show up on the desktop or anywhere else where I can get into it. I run the install disk that came with the hard drive (Maxtor) and a backup utility can detect the drive and shows that 1.37 TB of data is safe (so no data loss) but I can still not detect the Hard drive. I also noticed that the light on the hard drive is active indicating that the drive is being accessed.
Problem is simply that both my Macs do not show the drive regardless of how I connect them to the drive (FW400, FW800, USB2 and every port has been tried).
Need help here...please....
I realize this might be more suited for a general OSX or Hard drive issue, but since I have always got great answers from FCP users that I am posting this question here.

Hello all,
Thank you for all your comments and suggestions. I downloaded Disk Warrior 4 from Alsoft - paid $108, followed the instructions to the letter (after reading and rereading sevral times) and ran the utility...it detected the Maxtor HD, pointed out several errors, repaired the errors, and then gave me the option to preview the new and compare to the old HD...this is where things went wrong. There was no HD to be seen - new or old...same problem. HD is not visible on my Finder, on the Disk Warrior Preview or on the desktop. I went ahead and rebuilt the HD...all errors fixed, Disk Warrior states that all is fine and dandy and that my hard drive should be perfect and I can access it...BUT its still not there, I cannot see it on the desktop nor anywhere else.
It shows up in Disk Utility as a page icon - but I cannot access it.
So, unfortunately for me...my problem still remains and I am now out a hundred bucks!
Please, anybody out there - who can give me some direction - I would greatly appreciate it.
BTW, the data is still all there and the light on the front of the drive keeps flashing indicating something is going on...but drive is not mounted, invisible.
I read on the Maxtor packaging something about a built in Maxtor DriveLock - a password protected security measure against theft and loss...could I have inadvertently activated that and that is causing the problem...please advise.

I have deleted photos from my i phone 4 but when i sync the phone they reappear in my How do i delete these permenantly. I cannot see them anywhere backed up to the computer.

Hello
I have deleted photos from my i phone 4 but when i sync the phone they reappear on my camear roll. How do i delete them permenantly? I cannot see them backed up onthe computer anywhere.

iPhone's Photos app > Photo Stream > select photos and tap the trashcan.

We have 3 computers that have been authorized to home share but we cannot see eachothers library since updated to the latest version. Is there something I am misssing?

We have 3 computers that have the latest itunes version and now we cannot see eachothers library anymore. All of them are authorized. I unauthorized, reauthorized, in both the store and itunes to no avail. Is this just the way the new version is designed or is there something we are missing? I recently wiped the computer clean of all Itunes songs/files after several years of my son managing his itouch on it, so we are all clean of previous files. What is the deal?

It most definitely is the browser that is causing most of the problems. I have used Firefox so long, I can't even remember. Maybe since its beginning. But today is a sad day. I gave up on it. I can't accomplish anything and end up spending hours troubleshooting. I see I am not alone. I am so sick of it "not responding." It's simply not worth it to spend so much time trying to make the thing work, so I can actually do something. Installed, removed, reinstalled numerous times, and I can't fix your software on my Win 7 Pro machine. No problems with IE or Chrome. So. as much as I hate Google Update, Chrome has won the test. Sad, sad day for me to lose Firefox, but it just does not work on the Win 7 machine. I don't have the same issues with the XP machine and have exactly all the same add-ons. Keep it up developers and you will have no Win 7 users at all.

Cannot see ACR 5.3 update in the Camera Profiles on CS4

I'm using CS4 on Windows Vista 64. I have tried the manual installation process multiple times before and after re installing CS4. I've tried the AUM with no results good or bad. I know there are two Camera Raw.8bi files that have to be installed in Vista 64 and I've been very careful to get both of the correct files to the correct destinations - I've gotten a lot of practice at this. There have been no error messages. One thing Bridge is doing now is that when I open an image, it opens it in Elements 7, which I upgraded from. When I close PSE7 and reopen the RAW file, it then opens in CS4. My big concern however is not seeing ACR 5.3 in my Camera Profiles. Any thoughts for a non-techie?

Robert, I am having a similar problem with Elements 6, in my case I have installed the 8BI file on my desktop, and I can see all the options Jim describes in camera profile My camera is Nikon, so those are the options I should get. But on my new laptop, all I get in camera profiles is ACR 4.4. I originally downloaded the most recent camera raw update to the laptop, but when that didn't work, I copied the 8BI file from the desktop to the laptop with a memory stick, and I still get the same results - no options. Camera raw on the laptop does recognize my camera, and lists it at the bottom of the preview screen, but it does not populate the options in camera profile.
I distrust the answer you got from FAQs, because my camera did not exist at the time ACR 4.4 was released, and it really does not explain why I can't get the same camera profile selections on the laptop as I do the desktop. Both are Dell, Vista 32. Both are PE 6. Both are the same camera, and now, the same 8BI file. And both show ACR 4.4, The 4.4 doesn't bother me, but I want the camera options on my laptop.

I cannot see or select app icons in the App Store, they're there but blanked out

I Was prompted to update my Foxtel Go app, when I went to the App Store all the icons were blank and although selectable they won't download any updates.

Make sure you are signed in using the same Apple ID you used to originally download the app with.
From the App Store menu bar click Store > Sign In
If you are using the correct Apple ID, try here > Mac App Store: Hiding and unhiding purchases

I cannot see the yellow motion path in the composition window

Similar Messages

Maybe you are looking for