I cannot set up a blue tooth connection between my apple ipod and phone

I cannot set up a bluetooth connection between my apple ipod touch and an external speaker wirelessly. The speaker is a boombar and although I have been able to set it up successfully between the speaker and my iphone, I have not been able to set it up with the ipod. Please , any advice?

Unpair the spear from the phone.
Reset the speaker.
Try with the Mac again.

Similar Messages

I keep loosing blue tooth connection resulting in mac mini freezing.

I keep loosing blue tooth connection resulting in mac mini freezing. I am using an apple wireless keyboard and mouse. This did not happen until i upgraded to mountain lion. your thoughts
I leave the system on with Itunes loaded so I can use it for my media center with my Apple TV's
I use Super Duper every night at 2am for back as well as time machine.
I have the newest mac mini
2.3 Ghz Intel i5
8 gb of ram
i have 3 WD 2TB Hard drive connected (2) USB (1) Firewire
Also a Plextor blueray drive
Hooked to a Apple HD Monitor
Please Help.
I have been in tech support many times. I also brought it into my local Apple store.
Frustrated .
I spent a lot of $$ to make this set up happen
Please help.
Scott Southard
[email protected]

Did you ever find a resolutution to your issue? I have a similar issue after installing Mavericks where the Arris modem goes to sleep when my iMac does, even though other devices on the network are actively requesting data. For the time being, as long as the iMac doesn't sleep the network is fine.

Phone turns off blue tooth connection after 30 seconds into the call (when screen goes to sleep)

Installed 2.2, paired my fascinate with my plantronics explore 240 headset, accessed voice dial (which worked), connected my call, after thirty (30) seconds the blue tooth connection dropped, picked up the phone and continued the conversation. Just turning on bluetooth and leaving the phone sit for 5+ minutes keeping the screen active the blue tooth does not turn off, let the screen go to sleep and the blue tooth turns off.
I can not maintain a blue tooth connection when the screen goes to sleep, not even during a call. Is there a setting I am missing to keep this from happening or ... An alternative?
Any help would be appreciated

Hi.
The Bluetooth should not disconnect when your screen goes to sleep. Have you tried re-pairing the Bluetooth since the upgrade? Below I have provided you with the steps to pair the Bluetooth again. (Please make sure both devices are fully charged when doing so.)
Step 1 - Enable Bluetooth functionality on the Samsung Fascinate.
Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
From the main screen, tap Menu.
Tap Settings
Tap Wireless & Networks
Tap Bluetooth to turn on Bluetooth
Step 2 - Put your fully charged Bluetooth headset into pairing mode.
Start with your Bluetooth accessory powered off.
Press and hold the Call Control Button until the light indicator flashes blue and red.
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset.
Step 3 - Pair the Samsung Fascinate with a Bluetooth Accessory.
Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
From the main screen, tap Menu
Tap Settings
Tap Wireless & Networks
Tap Bluetooth Settings
Place accessory in pairing mode, see accessory pairing instructions.
Tap Scan for Devices, device starts Searching.
Tap [Plantronics Bluetooth] to pair
Pairing Complete, touch home to exit.
If you still need assistance, please send me a Private Message and I will be happy to help you.
Thanks,

Can you use earphone jack and continue to use blue tooth connection to speakers like bose

Can you use earphone jack and continue to use blue tooth connection to speakers like bose

Hi,
I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
Hope it helped!

Cannot get wifi or blue tooth on 4s even after resetting network settingse

Cannot get wifi or blue tooth on iPhone 4s even after resetting network settings.

iOS: Troubleshooting Wi-Fi networks and connections

What is the dial number for blue tooth connection ...

Hi,
I can't seem to find out what the dial up number is for my blue tooth connection. I assumed it was my mobile mnumber but when i try this it says (on the mobile) that there is an error with connection.
I have tried calling the suport line but don't get though to any so end up hanging up.
Thanks,
Bar

have no idea on that but try 0000
Nokia N95
V 20.0.015
0546553

You cannot set up an iAd Workbench account using this Apple ID.

I tried to sign in iAd Workbench and set up account, but when I logged in, it said, "You cannot set up an iAd Workbench account using this Apple ID. Try again using a different Apple ID that is not connected to an iCloud, MobileMe or .Mac account." What does this mean? How can I fix this?

Did you figure this issue out iderrick? I'm having the same problem.

Does my blue tooth have anything to do with my phone dropping calls

Does my blue tooth have anything to do with my phone dropping calls

Different electrical circuits. As a test, have you turned off bluetooth and gotten dropped calls?

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

Connection between CRM back end and ASP front end website for Ecommerce

Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,

Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen

Regarding connection between front end HTML and back end SQL 7.0

Hi!!
I am working on the project 'ERM'. I have designed 12 forms using HTML. Can u please give me brief idea how to establish the connection between a back end and front end i.e. between HTML and SQL 7.0. If possible can u provide me the source code for the same.
I will be very thankful to you.
Thanks,
Jigar.

Read up about multi-tier applications.
You need servlet and JSPs for the server-side presentation layer, some classes for the business logic, and some mor for the persistence layer either using JDBC or some framework like Hibernate.

Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other devices.

Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password

How to make the connection between a sale order and an invoice in SDK

Hi,
Im trying to make the connection between a sales order and an invoice using the SDK.
Here is how i create each of them:
Invoice:
public int SalesInvoiceInternalSave(string buisnesspartnerCardCode, DateTime dueDate, double discountPercent, string id, IList<InternalItem> items, ref int invoiceId)
      int res = 0;
      SAPbobsCOM.Documents invoice_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
      invoice_entry.CardCode = buisnesspartnerCardCode;
      invoice_entry.DocDueDate = dueDate;
      invoice_entry.DiscountPercent = discountPercent;
      invoice_entry.Reference2 = id;
      foreach (InternalItem item in items)
        invoice_entry.Lines.WarehouseCode = item.Shopid;
        invoice_entry.Lines.ItemCode = item.Code;
        invoice_entry.Lines.ItemDescription = item.Name;
        invoice_entry.Lines.Quantity = item.Quantity;
        invoice_entry.Lines.UnitPrice = item.Price;
        invoice_entry.Lines.Add();
      res = invoice_entry.Add();
      return res;
Sales order:
    public Boolean SalesOrderInternalSave(string orderId, string buisnesspartnerCardCode, DateTime dueDate, IList<InternalItem> items)
      SAPbobsCOM.Documents order_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
      order_entry.CardCode = buisnesspartnerCardCode;
      order_entry.DocDueDate = dueDate;
      foreach (InternalItem item in items)
        order_entry.Lines.WarehouseCode = item.Shopid;
        order_entry.Lines.ItemCode = item.Code;
        order_entry.Lines.ItemDescription = item.Name;
        order_entry.Lines.Quantity = item.Quantity;
        order_entry.Lines.UnitPrice = item.Price;
        order_entry.Lines.Add();
      int res = order_entry.Add();
      return res == 0;
What do i need to change to get the connection between the two of them?
And how do you insert a amount (not percent) discount into an invoice?
Regards,
Torben

Hi,
Add the sale order, then add the invoice. and while adding the invoice please add the following details to the invoce documen
invoice_entry.Lines.BaseEntry = 'Doc entry of the newly created SO
invoice_entry.Lines.BaseLine = 'Line No of the SO
invoice_entry.Lines.BaseType = 17 'For sales order document type.
Hope it helps,
Vasu Natari.

Help Needed in establishing connection between Kepware OPC server and UDS 4

Hi All,
I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
Any standard documentation on UDS 4.0 will be of great help.
Thanks in advance,
Shyam

HI Rajesh,
I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
Actuallt the Kepware OPC server and UDS are installed in the same machine.
Can you plz through some ligh on this
Regards,
SHyam

I cannot set up a blue tooth connection between my apple ipod and phone

Similar Messages

Maybe you are looking for