I cannot set up my Cannon MG6250 printer to use air-print?

Can anyone suggest why this setup does not work please. I've checked on compatability on the Apple website and ethey arecompatable. Thanks.

The MG6250 doesn't support Airprint out of the box, you need to do a firmware update!
Install the software, and then install the update to the printer (the printer must be connected to the computer via USB, not wireless!
Search for Firmware and then "AirPrint & Google Cloud Print Firmware Updater"; http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/InkJet/PIXMA_MG_series/PIXMA_MG6250.aspx?type=download&page=1

Similar Messages

Can i set up a cannon s450 printer with my mac

Is it possible to set up an s450 cannon printer with my mac? If so, how?

No. It only works with very, very old versions of the Mac OS (7.x-8.x).
Clinton

Cannot set date to '11-March-2012 2am' using af:inputDate

In my use case I need to accept GMT dates for one of my fields (TIME_OF_DEPARTURE) but I've been running into the following issues:
First, my local timeZone is EST where this date is not valid, based on some entries in this forum I went ahead and configured my application's timeZone as GMT where 2am on 3/11/2012 is perfectly valid. I made the following changes:
- added -Duser.timezone=GMT to the project's properties:
- META-INF/adf-config.xml
- and trinidad-config.xml
- af:convertDateTime.timeZone
The calendar popup hovever doesn't seem to accept this value. If I type in the value though it works.
What else do I have to do for the calendar popup to work? I'm printing out the adfContext.timeZone.ID value in the page where this is happening and I can see the desired timeZone to be active.
The second issue is that as I mentioned before I only want to do this for a single field and not for the entire application. My first attempt to address this was by using af:convertDate.timeZone but that didn't help. I had then to start making changes to configuration files I mentioned above and that affects every single page in my app. How can I address this on a field-by-field basis?
Any guidance is greatly appreciated.
Thanks,
MV

The format mask "dd-MMM-yyyy HH24mm" does not correspond to the literal "11-March-2012 2am". Try the mask "dd-MMMM-yyyy ha" instead ("MMMM" interprets the month as text but not a number, while "MMM" interprets it as a roman number, "h" corresponds to 1-12 hour, "a" corresponds to the AM/PM specifier). If you need the time portion in a 24-hour notation with minutes, then use the format mask "dd-MMMM-yyyy HH:mm".
Please, have a look here for information about the Java date format specifiers:
http://docs.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html
Dimitar

Cannot set up new ipad with retina display using os x 10.6.8 software

Unable to sync and get started the new ipad using Mac osx 10.6.8 current software. Do I need to upgrade software and what are the software steps to take ( or sequencing )?

Your iTunes version needs to be v11.x
FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Help needed setting up IP Cameras for remote access using Air Port Extreme

Does anyone know how to access IP Cams remotely and open the ports on the Air Port Extreme using a PC? I have several iPhone Apps I can use but I cannot get the ports opened and on a PC it seems less intuitive than the MAC directions.

That manual page is not fully correct. There is written:
Public UDP Port(s): <enter the appropriate UDP port value(s)>
Public TCP Port(s): <enter the appropriate TCP port value(s)>
Private IP Address: <enter the reserved IP address of the host device (from step 1)>
Private UDP Port(s): <enter the same Public UDP Ports or your choice>
Private TCP Port(s): <enter the same Public TCP Ports or your choice>
But it should be:
Public UDP Port(s): <enter unique UDP Ports of your choice>
Public TCP Port(s): <enter unique TCP Ports of your choice>
Private IP Address: <enter the reserved IP address of the host device (from step 1)>
Private UDP Port(s): <enter the UDP Ports used by your device>
Private TCP Port(s): <enter the TCP Ports used by your device>
Make sure you use the same ports in the private settings as you have defined in your IP camera. Normally a camera will use port 80 by default, so use 80 here.
The Public ports must all be unique. If you have not defined a port 80 here, you can also use 80. This will fail however when using multiple cameras. I for instance have 5 IP cameras and use the public ports 8451, 8452, 8453 etc.

Setting up FB4.5 iOS Packager to use AIR 2.7

Hi All,
I'd like to update my Flash Builder so that the mobile packager for Android and iOS uses the new AIR 2.7 SDK.
How do I do this?
I've downloaded the AIR 2.7 SDK, but the instructions say I should use the command line - but I'd like it integrated into my version of FB4.5.
Please advise.
Thanks!

I found a way to use the emulator for iOS (and possibly package) :
Copy the Flash Builder 4.5\sdks\4.5.0 folder to an other place. Overwrite the content of that copy with the AIR sdk.
You will now be able to compile and use the IOS emulator in command line (be sure that ADT and ADL are in the path variable).
Your command line will look like this :
adl -runtime "COPY_FOLDER\runtimes\air\win" -profile mobileDevice -screensize 700x862:700x900 -XscreenDPI 72 -XversionPlatform IOS FULL_APP.XML_PATH FULL_PROJECT_bin-debug_PATH
I didn't try the packager for now cause I don't have a valid iOS certificate, but you will have to use adt instead of ADL and export your project to the AIRI format.
I hope Adobe will simplify the process SOON....

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

Airport extreme: my macbook, cannon wireless printer, ipad and iphone cannot connect to internet when Apple Tv and/or PS3 is connected

Please help! I have an Airport Extreme (model A1143) as my router, and I have several devices connected to it wirelessly and wired. I have my Macbook, Macbook Pro, iPad 1, iPhone 4S, HTC Thunderbolt, Cannon wireless printer, and Apple TV (gen 1) connected wirelessly. I have my PS3, an external hard drive and DirecTV connected via ethernet cable (but sometimes my PS3 is also connected wirelessly).
I began to notice a few months back that my wireless printer had connection errors and could not print. And I noticed soon after that, from time to time, the internet connection on my Macbook and iPad was extremely slow, to the point that I could not surf the web. I tried several different printers before realizing that this problem was happening only when I had my PS3 turned on. I tried both PS3 wirelessly and wired, but the problem persisted. I figured it was a problem with the PS3, so I just made sure that PS3 is off when I need to use the wireless in the house. But I recently bought an ATV (gen 1) and also noticed the same problem when it was connected to the Airport Extreme (wirelessly) - i.e., Ican't print, and my internet is super super slow on macbook, ipad, etc.
So, it must be that my Airport Extreme is the problem, not the PS3 or the ATV. Is there anything I can do to fix this (i.e., some setting that has to be changed)? Or do you think that my Extreme is just dying out on me and it's time for a replacement (I bought it about 5 years ago)?

This problem, for reasons unknown to me, has resolved itself on its own. After several attempts finally everything decided to work. How does stuff like this happen? Thank you.

Cannot set Windows 7 default printer in Boot Camp

I discovered today that I cannot set a default printer in Windows 7. I right click, and try to make one of the printers default but there is no check mark. One of the programs that I use says I do not have a printer installed.
I can print to my printers using Word by selecting the printer that I want but cannot select a default in control panel.
If I access Windows programs using a VM Fusion, the program that says there is no printer installed in boot camp, does not give be this message and I can select a printer. BTW, I have never been able to select a "default printer" using VM Fusion.
The only thing unusual is I had to reactivate Windows for no apparent reason last week and I cannot select all of the Themes available in the personalize menu.
It is difficult to pinpoint when the printer issue started because I mainly access my Windows programs through VM Fusion. I am guessing the changes happened when I had to reactivate Windows
I am away from my iMac currently and was wondering if anyone has experienced this and/or have a suggestion.?
Thanks,
Roy

Update.
Apparently this is a Windows Registry issue. Looks as if there is a VM Fusion driver set as default (thinprint??) I cannot delete or modify this registry key. A new profile solves this issue and I will have to copy everything over to the new profile, if I cannot get this registry key issue solved. I will post on a Microsoft board to see if there is a solution.
Roy

I cannot set up page set prior to printing. From file to Page set then it comes up full depth..running off the bottom. I cannot print from the web

Question
I cannot set up page set prior to printing.
I go from File to Page set which comes up very narrow and tabs Format& Options and Margins Headers/Footers.
These are full depth..running off the bottom. I cannot set footers. I cannot print from the web
When I go to Print Preview I get a totally gray screen

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

How to print from Macbook Pro on a Cannon MP610 printer?

I have recently bought a Macbook Pro, and I have a wireless network set up at home.
I have no problems connecting to the internet or the network. But I can't seem to access the printer. I have a Cannon MP610 Printer. This printer is connected to the PC, which is connected to the modem. The printer is unable to connect directly into the modem which is unfortunate
It's a fairly big network. We have a master pc that is connected to the modem. This master computer also has a usb printer. We have a secondary pc ethernet linked to the master pc, which can connect to the internet and the printer via the ethernet.
The modem is a Thomson TG782T ADSL.
We have 3 windows O/S laptops, and 2 MAC O/S laptops.. No laptop can access the printer. Only the internet.
Can you access a printer from a laptop through the modem through the master computer the the printer?
The printer is turned on, and the PC is always running. The printer and file sharing is turned on.
What would be the least expensive way I could go about fixing this problem?
I have heard about people downloading Gutenprint; so i downloaded it, but couldn't get it to run.
I have tried many different ways, and after adding a new printer and finding it on the network.. is then says it is in the queue list.. but won't print. It just sits there until you cancel it.
Thanks in advance
Jason

Jason Paige wrote:
How can I use the Gutenprint driver on my Mac? All it does is downloads and installs, but it wont allow me to use it. (Like it doesn't come up under applications or anything).
Installing printers on Mac's is usually a two step process. The first is to install the driver software if it is not on the Mac already and the second is to add the printer queue. OS X 10.6 comes with Gutenprint v5.2.3 already so would be no need to download and install again, unless you customized the OS X installation and selected not to install the printer drivers or you have a model of printer that only a later version of Gutenprint supports. Since your MP610 is listed as a supported model with v5.2.3 then the downloading was probably a waste of your time.
To add the printer when it is shared by Windows you open Print & Fax, select to add ( + ) and then select the Windows icon. This will open a pane showing three columns. The first column is for workgroup names and since you mention you're using XP Home then your workgroup name will be 'mshome'. If your Mac does not see 'mshome' in the first column then we need to look at the IP addresses being used by your computers.
IP address:121.222.186.51
According to "what is my ip address.com" it says my MacBook Pro and master desktop PC has both the same IP addresses. Is this meant to be correct?
Looking at the IP address listed this is going to be the address of the Thomson router. If all computers were using the same address then this would be a problem but given that you used a web service to tell you the address then this won't be the case.
To see what IP address, subnet mask and gateway address you are have configured, you can use Command Prompt on XP and type "ipconfig /all" (without the quotation marks) and press Enter. This will give you a list of all the network settings in the PC. Write these down for later reference.
For the Mac you can open System Preferences > Network and select which port you are using (Ethernet or Airport). Then in the right pane will be the current IP address. To get more information you can press the Advanced button and then select the TCP/IP tab in the next pane.
How do I create a PMB queue? And how do I find out if I can ping the master PC? (what's your definition of ping?)
It's an SMB queue and I suggest that we leave that process for now. Besides you will need to know the IP address of the XP sharing the printer before we can try that process. So let's just try to get the computers appearing in the Windows Add Printer browser and using the Gutenprint driver instead of the Canon.

Problem with Cannon i9900 Printer on Mavericks

Printer stops and returns the message, "Filter failed".
The printer was working fine under 10.8 AND under 10.9 ( (mavericks) until I tried to update the Cannon i9900 printer driver!
I've reset the printer system with hope of starting fresh. I've fixed disk permissions (which did find problems and corrected).    I've also tried restoring the Cannon i9900 driver I used in 10.8 from time machine.   I ensure the supplies where full.   I did mutliple restarts.
Nothing works, Cannon jobs stop and return the dreaded " Filter failed" message ....
What is odd, is that I can communicate with the printer and do test sheets, head cleaning, and printer utility functions.    This all runs fine and the printer ink level are good.   Leads me to beleive the printer is fine, but someting in my OS/cups is whacked for the Cannon. My other printer (lexmark 250dn) works fine on 10.9 and I can successfully reinstall it after a printer system reset.
I later dug into the printer update on the apple site (Yes I should have check this first), and subsequently discovered the i9900 wasn't in the supported list.   http://support.apple.com/kb/ht3669#canon-inkjet This is why I'm wondering if its a maverick driver problem.   The driver I've currently got installed is version 10.67.1.0, it looks like all supported cannon drivers are now at 10.72.1.0.
Thanks in advance for any help that can restore my printer!
Bon

Problem solved. The Canon i9900 does indeed work again in Marvericks!
Had to remove the new apple drivers and use the older Cannon drivers.    Did the following:
1.) Downloaded the Snow Leopard 10.6 Canon drivers (newest on the Canon website).
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/i_series/i 9900#DriversAndSoftware
2.) Reset my printer system.   This removes most of the files in the /Library/Printers folder; however, there were still hidden files in the folder that had stuff that I think contributed to the driver "confusion". Likely why my earlier resets of the printer system were not successful.
3.) Set FInder so I could see hide files. Opened Terminal and entered:
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
4.) Removed the (now unhidden) canon folder from /Library/Printers
5.) Installed new driver obtained in step 1.   In my case this installed the printer in the Printers & Scanner System Pereferences, and my printer was back up and running!
6.) Reset my finder to hide hidden files from Terminal:
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Bon

How do i wirelessly install a cannon 5320 printer?

How do I install my Cannon MG5320 printer wirelessly to the Mac so I can also use Airprint with an iPad?

this has been covered before. you know this is the Mac Pro section of things, right?
okay. First, grab the Printer Update Utility from Canon. . Turn the printer off then on. connect with usb cable. run printer update utility to upgrade to firmware 2.0. turn printer off then on again. airprint should work from then on. You can't update via WiFi, so I've read. Other than that, I suggest you snag a copy of canon's manual for this, and check it out for how to set up wireless printing between it and your Mac
John b

Security set to allow high resolution printing but pdf won't print

We create a large number of pdf files to send out to
clients, etc. We have been using security on all pdf's being sent out, however, some clients are having issues printing these pdf files even though our security settings are set to allow high resolution printing. Any one have any ideas why? I cannot duplicate the issue for whatever reason, the files still print for me.

I discover I am suddenly having a similar problem as well.
I have recently migrated to a new Intel iMac/Leopard, I'm on a network and trying to print to a Tektronix/Xerox 7700 laser printer. I can print anything other kind of document on that printer as long as it is not a PDF.
When I open the printer window it says the job has been stopped. I choose the job and tell it to "resume" at which point the printer pauses itself. Once it flashed a window that said Operation Not Possible - client-error-something-something and then closed before I could see what the last two words were.
I am currently using Adobe Reader 6.0. I would love to be able to try to print out of 7.0 but there seem to be continual download problems in the form of constant connection failures. I also have Acrobat 6.0 STD - can't print out of either one.

HT3771 I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!

I Have a Kyocera FS-C2026MFP printer/scanner. How can I only pint the document in Black. I cannot work out how to not print in colour to save the inks!!

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc." or "Kyocera Inc."
http://usa.kyoceradocumentsolutions.com/americas/jsp/upload/resource/25359/0/Mac Driver3SoftwareGuide1.1.pdf
On the printer driver documentation, Page 5, in the Imaging setting, although the options are not specifically shown, there should be an option on that screen of the print driver to click and select "B/W" or 'black and white' or 'grayscale' or 'monochrome' as Print Mode rather than the "Full Color" option shown in the illustration below.
You access these settings once you have selected 'Print' from an app.
If necessary, you might need to click on the 'Down arrow' button next to the printer name (OS X 10.6), or 'Show Details' button at the bottom of the print dialog box (OS X 10.8) to see additional settings.

I cannot set up my Cannon MG6250 printer to use air-print?

Similar Messages

Maybe you are looking for