I cannot show the transport dock at the base of the garageband window

The transporter dock that containes the record, stop and forward/reverse buttons is hidden in the main garageband window. I have tried downloading a later version of the software but it is exactly the same. This has to be an easy fix but I can't find anything in the help file or the menu's to solve this.
Anyone got an answer.
Cheers,
Bob

Bob,
are the controls missing from the GarageBand Window , or is the application window too large and the controls are outside the screen limits?
If the second should be the case (off screen), try to toggle the size of the window by pressing the green button in the traffic light in the upper left corner or by going to Full Screen Mode. Does that bring the controls back on the screen?
If the window is smaller, and the controls are missing from the bottom panel, try HangTime's "oddball probs" fix and trash the GarageBand preferences file - move com.apple.garageband.plist from the Preferences folder in your user library to the Desktop.
See the FAQ:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)
Regards
Léonie

Similar Messages

What is the purpose of Additional Group Base in the settings of AD plugin

Hi everybody,
We have some trouble when searching for NTFS files. (10.1.8.1. Windows 2003)
The involved user is authorized by a group in Active Directory to view the files but OSES can'nt find any. The user, who crawled the source, works fine when searching.
What is the purpose of Additional Group Base in the settings of the AD identity plugin ?
regards
Rainer

By default users/groups available in the Users folder are alone searched, so inorder for the user/group to be searched in a different Org Unit, the additional group/user base parameter can be used

Why does the iTunes dock icon bounce when quitting the app?

ITunes 11.1.2 on Mac OSX 10.6.8.
Every time I shut down iTunes, the dock icon bounces. This never happens with any other application. Dock icons are supposed to bounce when you start up an app, not when you quit it, Right?
Thanks.

Hello there, ocsimple.
The following Knowledge Base article clarifies what it means when an icon bounces on your dock:
About the Dock (Mac OS X)
http://support.apple.com/kb/HT1779
Particularly:
Bouncing icon in the Dock
An application's icon may bounce in the Dock to request your attention.
When you close iTunes, is it prompting you with a window or some other message when you click the bouncing icon?
Cheers,
Pedro.

Make the transport router graphical editor show up

On STMS, once I click the transport router button, I should see the the transport router graphical editor directly.
However now I see a list of items. I have to select "go to-> graphical editor" in order to see it.
Could you tell me how to make it default? My TMS configuration is free of error.
Thanks a lot!

Hi,
For you solution is
Go to STMS >Extra>Setting-->Transaport routes
Here select Graphical editor.
Revert once done!
Regards,
Gagan Deep Kaushal

Function Module not being displayed in the Transport Request

Hi,
I Created a FM "RH_ACTIVATE_WFOBJECT_AFTER_IMP" in my SAP System. After I created due to problem in editing I have deleted the FM and also deleted it from the request.
I have re created the function module and if I see the object directory entry I find the following
Identical request locks
Request User Task/request Object
**** ***** R3TR FUGR RHWS
In the request I cannot find the function module but only the function group. Please help me to get my function module visible in the transport request.

Hi ,
When your creating the FM for first timw with new FGRP then no need to worry .
You can see only the FGRP in the transport request number and when you move this transport request to further systems your FM automatically transport with the FGRP.
Next time when your creating a new FM under the FGRP which is already moved to production you can see only your FM name under the transport request.
When you go to FGRP main program by follwing the path
FGRP -> Disply FGRP in SE37 you can see the main program of the FGRP there if you see one include with TOP and XX .
double click on the XX Include.
there you can see allthe FM under that FGRP.
Thanks
Naresh

My iPod shuffle could be seen on iTunes, but it cannot be charged and don't play music. The battery light do not flash at all.

Like what I mentioned, the iPod do not work, it won't play music and the battery light do not flash.
But it shows in iTunes, and I could sync music into it.
I tried to reset all the settings of the iPod, and installed all the new software, but it does not work.
I don't know if it works before, my friend left it to me. I erased all the data she used before and syncronized all my music inside.
But it just never worked in my hand...
I really appreciate all feedbacks! Thanks and please answer this question if you have the similar situation!!

Are you using the USB docking cable that came with the iPod? There are separate contact points for power and data, so it is possible for the cable to connect for data, but not for power. Some third-party replacement cables may be of lower quality, if you do not have the original cable
However, it seems to be getting power, since the shuffle is operating when connected and you are able to sync when it is connected. So I think your USB docking cable is working.
That leaves a problem with the USB port or a problem on the shuffle.
For the USB port, it may not be supplying sufficient power to charge the battery. As a test, you should shut down (power off) the computer and disconnect all USB devices, including hub, except for standard keyboard and mouse (if normally used). If the Mac is a laptop, connect its power adapter (so that it's not running on battery power). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up the Mac, run iTunes, and connect the shuffle to a direct USB port on the Mac. Any difference...?
If that does not help, it may be a problem with the shuffle, such as a worn out battery.

How can I add a system to the transport route?

Hi,
      I have a DBP --> PBQ --> PBP systems and now I have a new environment TRN (Training system) and I want to include this system in the transport route.
Right now the transport route is configured like I said 'DBP --> PBQ --> PBP' and I want to include this environment (TRN) to the transport route because I want that the system pass automatically the orders that going to PBP system to TRN too in the same time that pass it to PBP. For example, like this:
                 PBP
DBP --> PBQ ==>
                 TRN
How can I do that?
<removed_by_moderator>
Read the "Rules of Engagement"
Thanks people!!
Edited by: Juan Reyes on Apr 16, 2009 8:57 AM

Hi Carlos,
whatever be the environment, whether it is DEV, QA or PRD, when you login into an ABAP SAP system and run transaction STMS,
In the initial screen, it always shows two fields, System and Transport domain.
System field contains the SID in which you are currently logged in.
Transpor Domain shows value like this: DOMAIN_SID
here this SID is the domain controller for the system in which you are logged in
However, if you are logged in the domain controller system itself and then run STMS, then it will show in the lower half of the screen, that, you are logged in as a Domain Controller.
To be more clear, run STMS in any system and Menu->Overview->Systems->Second column 'TMS system type' must contain a 'domain controller symbol' against one sytem SID. this SID is the domain controller.
thanks
Bhudev

Is there a way to open a new tab/window by clicking the Safari dock icon?

Is there a way to open a new tab or window by clicking the Safari dock icon? Right now, the default behavior seems to be that Safari simply un-minimizes or displays the last window in focus.
I want to be able to quickly fire up a new tab or window in Safari when it is out of focus, such as when Finder is in focus. The workaround right now is to right-click on the Safari dock icon, and select "New Window", or to allow the last window in focus to appear, and cmd+t or cmd+n. But this is too many steps over the course of a day for a highly frequented task like this.

I'm glad that helped. Thanks for posting back.
... when I save this as an application as "run only", it's relatively quick to run, but there's a delay to load... I assume it's opening Script Editor every time?
As long as the script is saved as an application -- Run Only or not -- it should definitely not cause the Script Editor to open. You can verify this by closing the Script Editor application altogether prior to clicking on the docked script icon that you saved. You should notice that the Script Editor does not open when the script is run.
FWIW, I went back and saved a version of the script as a Run Only app, and I didn't notice any difference between it and the original, which was saved without the Run Only option checked. The delay that you're noticing might be accounted for by the fact that the script, because it was saved as an application, will be activated just as any other standalone application would be. This happens prior to Safari being activated. Watch your menu bar when clicking on the docked script icon and you should see the name of the saved script app appear for a split second before Safari gets activated.
The only time I can think of that you might wish to save the script as a Run Only application would be if you wanted to conceal the script for some reason. If, for example you were publishing the script as a part of an application release and didn't want its contents known, or you didn't want an end user to be able to edit the script, you might select the Save As > Run Only option. To illustrate this, try dragging and dropping a script saved as a Run Only application onto the Script Editor's icon. You should see a warning dialog to this effect:
*Unable to read the file because the script is not editable (it was saved as run-only).*
Whereas if you drag a script that was not saved as a Run Only app onto the Script Editor's icon, the script should open in the Editor, and it can be edited.
I played around with the "stay open" option for saving the script as an application, but it appears I have to close the app and reopen it before I can get it to work a second time.
The Stay Open option is appropriate for scripts which use an "On Idle" handler, which really wouldn't apply in this case. Check out more on Idle Handlers here and here.
Is there a faster way to use this multiple times throughout the day?
One way you might speed up the action would be to save the script +as a script+ by choosing Save As > File Format: script from the Script Editor's File menu. The resulting script can then be activated by assigning a hot key to it using one of several 3rd-party keyboard shortcut programs available on the Internet. (I used Spark, assigned a function key to the script I posted earlier, and found the action to run significantly faster.)
Good luck.

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

Implement the Transporte

Dear All
    I'm trying to Implement the transport System to get access to the Appointments via Exchage Server at this moment i'm following the Steps indicated in the URL http://help.sap.com/saphelp_nw04/helpdata/en/a1/93de005bec214c8af54844721ef224/frameset.htm
    Administration Guide->Groupware->Installing and Configuring Calendar Connectivity->alling and Configuring Microsoft Exchange Connectivity->Microsoft Exchange Connectivity Architecture->nting the Transport
   At the Number 3 it says that i have to Look in the Outlook->Tools->options and then look in the tab Mail Services. But because i'm using the outlook 2003 i could't get this tab.
Those any one can tell me where can i found the Mail Services?
Best Regards
Pedro Miguel Rodrigues

It sounds like you need to create a custom toolpart for your web part. Please read
this article for more information about how to do this. You would place your logic in the CreateChildControls() function of the custom toolpart class to populate the lists from the current site.
Danny Jessee MCPD - SharePoint Developer 2010 MCTS - SharePoint 2010, Configuring Blog: http://dannyjessee.com/blog Twitter: @dannyjessee

Isssue when collecting the transport request for a query and its elements

Dear All,
When collecting a query and its elements, only the query is getting collected in to the request and not the elements and I an error is getting displayed as You can not use request xxxxx and elements could not be saved. This is in bw 3.5.
Can anyone suggest?
Regards,
Ram

Hi,
In the transport connection make sure that all the elements for the query which you need are manually checked.
Just drop down the menu and see the elements of the query and check if they all are selected or not.
Here you can also see if the elements are already present in some other TR.
Just delete all those TR's before creating this new TR.So that these objects are unlocked or it will not added to your new TR niether it will give an error.
Also make sure that all the elements have same data package and none of the query elements are assigned to temp package or any other package.
Once you are sure that all the elements are checked and above told issues are corrected then only create the transport and release them.
Thanks
Ajeet

Problems with the transport of substitutions

Hi all.
We have developped some substitutions. We have checked that everything is alright in development environment, and then we have tried to transport to quality environment. The transport log has no errors, and the control tables have been filled with the same data in both environments.
But when you go to transaction OBBH to see the transported validation, the line of every step in the validation where the exit is specified is missing in quality environment. Any idea?
Details:
- It is a substitution of Financial Accounting / Complete Document
- The parameter type of the substitutions is C_EXIT_PARAM_CLASS
- The exits has been declared in the following way:
FORM U913 USING bool_data TYPE gb002_015.
- Generation program RGUGBR00 has been executed in both environments
Do you see anything that seems incorrect?
Thanks in advance,
Carlos

Hola Carlos,
Tengo el mismo problema que tú describes en el foro. En desarrollo me funciona bien la sustitucion y en calidad ya no.
Esto es porque la tabla GB01 está diferente en desarrollo que en calidad.
¿Tú como le hiciste para modificar en calidad la tabla GB01 para quitarle la marca al "BEXCLUDE"?
Gracias de antemano, saludos!

Please fix the nav dock home screen!

I find it very irritating that the car dock screen does not rotate. It only displays in horizontal mode. I prefer to navigate vertically. I'm not concerned about what I'm passing on the map, I want to see where I'm going. This oversight doesn't make my drive safer because I'm always messing with the mount to flip it horizontal to vertical and vice versa. My fiance's HTC Thunderbolt rotates its home screen vertically in the car dock. Why can't the flagship phone do what the older phone does?
Since this is very irritating, I thought I'd just disable the car dock screen. It seems I can't.

i knew that but this is not the proper way to fix,
this is a bug and apple have to fix it in a next update version
Thanks

Identify the package in the transport request

Hi SDNers,
How do i identify the package that i have collected all the objects in the transport request.
Thanks,
Satya

Hi
In the transport connection screen, you can see the package, where your objects are assigned.
Cheers
Chanda

Release the transport request

Hi,
I created the transport request.I want to release the transport request from developement to testing ,
Please tell me how to do that.
regards,
chinna.

Hi,
Check the below steps.
1. Go To SE09 or SE10.
2. Click 'Display' button.
3. TR will be list out in Tree view.
4. Place the cursor in the TR which is going release.
5. in menu, Request/Task->Complete check->object and
Request/Task->Complete check->Check Request Consistancy
Request/Task->Complete check->Inactive Objects.
6. in above if you get any error, you should rectify the error and repeat all the steps again. otherwise do the step7.
7. Click the 'Release Direclty'[F9] button in the toolbar.
Regards,
Boobalan S

I cannot show the transport dock at the base of the garageband window

Similar Messages

Maybe you are looking for