I cannot sign in on windows 7 pc over Control panel

it ist running for hours without result. (On Mac and iOs devices it works.) I installed iCloud several times new, but I can't get in. Nothing changed - but the router.

Although your message isn't mentioned in the symptoms, let's try the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store

Similar Messages

  • Windows 8 Compatibility with Control Panel 2.1.1

    I am running Windows 7 and using Control Panel 2.1.1.  I read a note on the Apple site that Windows 8 is compatible with this version?  Is this true.  I just want to be sure before I install Windows 8.  Things work pretty well right now.
    Thank you,
    Mike

    Viscosity wrote:
    Csound1 wrote:
    iCloud is not supported by Windows 8.
    It is according to the system requirements:
    http://support.apple.com/kb/DL1455
    So it is, (I assume it is the cause of the .1 update), I'll update my info, thanks.
    Unfortunately Windows 8 is still unsupported at the driver level on OSX.

  • Windows Color Management in Control Panel Settings?

    I know enough to disable color management in the printer driver when I enable my photo editing software (PS Elements) to handle color management.
    However, what should thecorrect setting for Color Management be in the Windows 7 Control Panel.
    Assuming I have selected my printer in the device setting and have uploaded the ICC profile for my printer in = Windows Color Management in the Control Panel
    do I check the box next to "Use my settings for this device" ?
    do I select "Automatic (recommended)" or "Manual" in the Profile Selection box ?
    do I check  "Use as Default Profile" for my paper's ICC profile ?
    or will my graphics program automatically override all the settings in Windows Color Management in the Control Panel?
    If the graphics program does not override the Windows control panel settings,  what is the proper  permutation of settings.
    Thanks

    Good question seweavermm.
    Access to video card control (if available) is typically done through either System Preferences on a Mac or the Control Panel on a PC.  The good news is that since you don't know how to do this then it is high probability it is in default mode and is a moot point.  It is my understanding that not too many video cards have  settings that are not reset by the by the actual calibration process itself yet put this step in for completeness.  The more important and common condition that must be done is setting the monitor to a condition that is stable and allows access to its full gamut.  I suggest to read the details of the instruction manual for the OSD controls for your monitor to verify that the default conditions meet those chacterisitcs.  Typical gotchas would be defaulting to sRGB color space which would limit the colors you could see or having a mode set that does anything dynamic such as scene adjusted brightness.  Another gotcha is when the monitor and software allow adjusting brightness for the ambient light - best to control the ambient light and have the monitor at a constant brightness so as not to invalidate any calibration/profiling done with the monitor.  Note that changing any OSD settings and fiddling with monitor conditions invalidates the calibration done as the calibration is only valid for the fixed conditions of the monitor at the time of calibration.  That was a lot more then the question you asked yet wanted to put things in perspective.  Hope this helps.

  • Locked out of Windows XP Boot Camp control panel

    I'm getting locked out of my Boot Camp control panel under Windows XP with the following message:
    "An error occurred while trying to access the startup disk settings.
    You may not have privileges to change the startup disk. Make sure you have administrator privileges and try again."
    Likewise if I try to restart OS X from the XP icon tray, I get this message:
    "Could not locate the Mac OS X boot volume."
    However, holding the alt-key at boot up reveals both startup disks. I can boot successfully into OS X and XP using the alt-key, and I can switch startup disks successfully from the OS X System Preferences pane. Also, the Boot Camp partition is visible to Vmware Fusion and can be used to boot into Windows XP successfully. It's only within native Windows XP that the OS X boot volume is not accessible.
    I'm running Windows XP Home (SP3) with the latest Boot Camp 2.1 update. Re-running the BCUpdateXP.exe program to repair Boot Camp was unsuccessful. The OS X boot volume still can't be accessed from XP. Any ideas out there?

    Same problem, same error message now in October 2008. Running Mac OS X 10.5.5 & Windows XP SP3. Also running MacDrive and Norton Anti-Virus for Windows.
    Problem disappears upon reverting to WinXP SP2 using Windows System Restore. Imperfect fix, but it does work. Revert to last restore point when SP2 was working.
    BillOnHwy1

  • Cannot sign up on Windows Azure

    Hi all.
    I would like to try the free trial of azure, but when a press "try it now" the new page is completely blank without any subscription form. I can only see the name of my account on the top. 
    Can someone help me out?
    thanks.

    Hi,
    Use the given below URL to try.
    http://azure.microsoft.com/en-us/pricing/free-trial/
    Use the private browser in case if you have any other previous login issues or try to clear the cache of the browser and give a try.
    Cheers, Senthilraj

  • My Firefox 3.6.6 cannot be deleted form Windows Xp using the Control Pannel. How To Delete?

    Help
    == This happened ==
    Not sure how often
    == Not Sure

    Just Download The Latest Version Of Firefox and Then You Will Be Able To Delete

  • I cannot edit the Cross Dissolve in the Effects Control Panel in Premiere Pro CC 2014

    If I put a film dissolve between two clips on my timeline, and then click on the film dissolve, I'm able to go to my Effects Window and drag clip A (Top Bar) to the right and trim lets say 3 seconds then go to Clip B (Bottom Bar) and drag to the left to take off lets say 10 seconds off the beginning of clip B.  That very method worked for cross dissolves until this latest update for CC 2014.  It forces me to use ripple edit in the timeline on each endpoint of each clip instead of flying through it in the effects window by clicking each dissolve in the time line.  It's just weird that they would take that out for only the cross dissolve which I prefer using more than anything and not the rest of the dissolves. Does anyone have a clue why? Or is this a bug?

    That is correct. This is the only transition where the workflow has changed.
    You can now make it into a preset.
    BTW I dont use it often but i dont like it either not being able to adjust the cross dissolve in the EC.

  • Windows 7 - sounds menu control panel

    %hi, ,my x-fi is not being detected in the sounds menuas a selectable device, the recording menu shows the devices listed but not in sounds.
    i reinstalled and repaired and got new drivers, nothing works, need this for music
    xenofear

    Hello jhpfan24,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. 
    I see that you are looking to backup and restore you computer onto a Solid State Drive, and I would be happy to assist you in this endeavor! 
    If you need to, you can refer to this document About Solid State Hard Drives as well as How to Install an SSD (Solid State Drive). To boot from your solid state drive, you can clone the image from your HDD and imprint it onto the SSD. To do this, please follow this document on How to Migrate to a Solid-State Drive Without Reinstalling Windows. 
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Have a great weekend!  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Yahoo is in menupage after update, cannot remove from firefox, is not appearing in control panel so cannot remove there, worried may be malicious

    When trying to look at temp file on usb, downloaded file viewer, yahoo was installed as homepage and is now appearing in toolbar and menu bar. Can remove it from toolbar but will not go from menubar. It is not appearing in the control panel. Uninstalled all programmes that were downloaded today to see if did anything but has not had effect. Worried that this is affecting laptop.

    You don't want to update to 3.6.4, trust me. Stay with 3.6.3. If you need to download it again you can find it here:
    http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/

  • HT4759 I have a Windows 7 machine and cannot get Icloud control panel to work. Why can't I login and subscribe to someones photos

    I have a Windows 7 PC and have installed Icloud control panel the latest. I cannot sucessfully login and subscribe to me daughters photos, or my nieces photos. I really could use some help, as I am not an Apple user and I am lost here...................Thankx....

    Do you have an iCloud account?  If so, did you sign into your account on the iCloud control panel and check Photos, then click Options to confirm that Photo Sharing is turned on?

  • How do I locate the quicktime control panel (to upgrade to quicktime pro) in Windows 7 home premium?

    I just paid to upgrade QuickTime and received a registration code. Tho problem is there is no way to find the QuickTime control panel via the Windows 7 Home Premium control panel. How to I ovrcome this?
    p.s. I'm a newbe to QuickTime :-)

    Thanks Gary,
    This does not help me... the instructions state:
    1. Locate the QuickTime 7 Control Panel
    From the Windows Desktop, click on the Start menu, choose Settings, then choose Control Panel, then locate the QuickTime 7 Control Panel.
    However, I cannot locate the QuickTime 7 Control Panel on the Windows 7 control panel -- it's not listed anywhere in the available options.

  • A205-5809 - I cannot bring up the Control Panel or do a System Restore

    Hello. I am the Chairman of our church fundraiser and I have inherited a laptop from the previous Chairman. I am not used to working on a Toshiba and really not used to working with Vista.
    When I first got the computer I downloaded Microsoft Office Home Ed 2007 and a few anti-virus programs. At some point the computer started acting up. I tried to do a System Restore to a few different System Checkpoints and had no luck. The System Restore would not complete.
    My immediate concern is the Control Panel. If I go to the Start Menu and click Control Panel, a small white appears as if the Control Panel is opening and then it immediately disappears. I can access the Control Panel by going through My Computer though.
    I mentioned both issues in this one post because I do not know if one issue is causing the other. Please give me any suggestion as to why I cannot do a System Restore or why the Control Panel will not open up from the Start Menu.
    Thanks in advance!
    Solved!
    Go to Solution.

    Satellite A205-S5809 
    In case Christopher's fix doesn't solve all your problems...
    Have you installed Service Pack 1? If not, do so.
       How to obtain the latest Windows Vista service pack
    Does this fit the situation?
    Icons are missing from Control Panel, or you cannot start Control Panel, the Welcome Center, or game...
    Restore Points get corrupted from time to time. The fix is to turn the function off and then on again. Unfortunately, all previous restore points are lost.
       Turn System Restore on or off
    -Jerry

  • I cant sign in icloud control panel

    It said You cant sign in because of a server error. what can i do to fix it?

    Hi xkenkulx,
    If you are having issues signing in to iCloud or the iCloud Control Panel, you may find the troubleshooting steps outlined in the following articles helpful:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    iCloud: iCloud Control Panel setup cannot be started
    http://support.apple.com/kb/TS5178
    Regards,
    - Brenden

  • HT1925 Cannot remove Apple Mobile Device Support from Control Panel

    I am trying to reinstall iTunes.  Followed all instructions but still cannot remove Apple Mobile Device Support from the Control Panel. Help.

    Ad2Mollie wrote:
    No error message, the option of uninstall does not come up when I choose MobileMe Control Panel in the Control Panel
    If you have a Change option that may lead to Uninstall as one of the choices. See also note 2 of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Control Panel with Windows 7

    When I click the options button on Photo Stream, the following two options come up-
    My Photo Stream
    Shared Photo Streams
    Where did the Upload Option go? It worked before

    Windows 7 is compatible with the iCloud control panel for Windows.  It supports Vista SP2 and above.  You can download it here: http://support.apple.com/kb/DL1455.  This guide explains how to sync your PC with iCloud: http://www.apple.com/icloud/setup/pc.html.
    However, if you are running iOS 4 on your phone you must first update it as explained here: http://support.apple.com/kb/HT4972.  After doing so, you can create your iCloud account by going to Settings>iCloud on your phone and signing in with your Apple ID.  Once the account is created, you can then sign into the account on the iCloud control panel for Windows.

Maybe you are looking for