I cannot slide to unlock...what can i do to fix this problem
i cannot slide to unlock my phone
- First dry the iPod in a sealed container of uncooked rice if the iPod is not now dry.
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
Similar Messages
-
CANNON EOS 7D get message as "cannot connect with battery" What can i do to fix this problem?
when i turn on the camera and its trying to read the battery the message i get is " cannot connect with battery" i thought it was a defective battery and went out and bought a new one and still kept getting the same message. what can i do ? Does anybody been through this situation from what i hear this is common on the CANNON EOS 7D models only why is that?
Yes! It is a factory defect and Canon should recall 7D and 60D for this problem in stead to charge $230 for their own quality issue. I have 7D and not using it that often, it shows the same error message. Cleaning can not fix it at all! It was the soldering bad point at the battery and the little circuit board next to it, based on an engineer who repaired it by himself. Canon pro's: If you guys are cate about the Name of Canon then take these cameras back and fix them for free! Otherwise, the customers will switch to Nikon soon.
-
i have restored my iphone 3gs and put my sim card in it but it will no longer activate. my power button is broken so i cannot turn it off. what can i do to fix this??
Then the SIM may have failed. Try removing and re-inserting it. If that doesn't fix it, you will have to get the SIM replaced by your carrier.
-
Every time that I try to download my music from I tunes an error message comes up it says, ( err = 450) Make sure that your network connetion is active and try again. What can I do to fix this problem, I have tried everthing that I-tunes has told me but with no luck. Thanks
Try disabling your parental controls. Does that help with the 450?
iTunes: Using Parental Controls -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?
Try:
iOS: If you can't back up or restore from a backup in iTunes -
does anyone have a problem with the new page software? I am currrently running into the same problem with the old pages software re-appearing and any document that I had used with the new update, will not open. The system requires me to attempt to download a new version of page, when the newiest version has aleady been download and has been in operation.
What can I do to fix this problem? I desire to use the new version at all times.
Please help
JamesYou just have to be particular with which Pages version you are opening the document. use Right click on the document and choose the right version of Pages.
-
I upgraded to iphone 4s and installed iOS 6 but now my battery life is significantly reduced. What can I do to fix this problem?
I restored my settings my I got the new phone but I think I heard that with the iOS 6 updated that can be an issue and it is better to start from scratch rather than restore your settings.reset all settings
settings- general- reset - reset all settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
if issue persists backup info and restore via itunes
Peace, Clyde -
What can I do to fix this problem?
when I create an account in icloud appears to me, you have exceeded the limit for free accounts, what can I do to fix this problem?
when I create an account in icloud appears to me, you have exceeded the limit for free accounts, what can I do to fix this problem?
-
My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem? We always used to FaceTime. And now all of the suddenly we can't.
Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419 -
I am using a Canon 640 printer and my MPNavigator will not remain open. It pops open then quickly closes. I've used it for several years but it just started doing this. What can I do to fix this problem?
I had a similar problem with a Canon MP800R under Mac OS X 10.9.2 Mavericks.
In my case, the MP Navigator app in the dock was linking to the wrong file.
It linked to Applications > MP Navigator 2.1.app > Contents > Resources > MP Navigator.app, but it should link to the "main" app, probably under Applications > MP Navigator 2.1.app.
After pulling the correct MP Navigator app file to the dock, I can start MP Navigator again by clicking on it in the dock. However, when clicking on it, a second MP Navigator icon will show up in the dock and stay there until the app is closed. By the way, the MP800R scanner also works (although officially not supported by Canon). -
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
Some of the songs in my Itunes library jump to the next song before it finish. What can I do to fix this problem? Please help!!
Hi bibijc!
I have an article here that addresses your issue, and can give you some helpful troubleshooting steps for resolving the issue:
Troubleshooting songs that skip
http://support.apple.com/kb/ts3217
As a secondary troubleshooting step, you may also need to recreate your iTunes library. This can be done by following the instructions in the following article:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
For access to the itunes store, I get an error message -45054 ¿what can i do to fix this problem?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
ICloud match freezes on step 1...what can I do to fix this problem?
Recently just purchased iCloud annual subscription, but I have been stuck at the end of step 1 for 2 days now...what can I do to fix this problem? Please help!!!
From what I understand it is to do with your iTunes library file being corrupted. I tried to force it to create a new version of the library file but then my iPad didn't recognise it and thought it was a different one to what it had been syncing with before.
So I'm not sure where to go from here. -
adobe keeps crashing, you can be on a web page reading and the browser opens the page in a new browser. I did not have this problem the older versions. What can I do to fix this problem.
See [[Firefox keeps opening many tabs or windows]]
Maybe you are looking for
-
How to automate the upload x 509 certificate to SAP process.
Hi Pros, We currently using x509 for SSO. However, we have to manually load the x509 certificate to the SAP ABAP system for every new users, or a certificate is expired. Has anyone been able to automate this process? How to know when a certificate
-
Reverse asset retirement from last year
Hi, One asset was retired in Dec 2009. Now we want to take the asset back in our books and then sell it to another customer. Problem is: i am not able to reverse the retirement from 2009. Also tried using post capitalization ABNAN, but system gives e
-
CS4 on XP with NVIDIA 8800GT - terrible performance
I'm running CS4 on XP (Boot Camp on MAC) with an NVIDIA 8800GT 512mb. Performance is awful - constantly freezing during playback. The problem persists on After Effects as well. Meanwhile, the entire CS3 suite runs like a champ. I found Adobe's regist
-
after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTune
-
TM using main hard drive as backup
I have a MacBook Pro and I am using Time Machine on 10.5.2. When I am at my desk, I plug in my external drive and use that for backup but every time I eject the disk, TM then makes my main hard drive the back up drive (with the TM icon and all). Then