I cannot specify a "display" return address on iPad Mail

The only return address I can input is my ISP or webmail SMTP, but *I want my reply address to be my Vanity DNS address*.
How can I do this?
(I use gmail for webmail & as a mail depository. It is not the address that my friends, family or clients see because I display a different return address. I can't do this it seems with iPad although I can do it with Mail on my Mac).

I'm having the same problem with trying to upload a Numbers file from my iPhone to iWork.com. My Apple ID has been up and working for years, along with a valid email address. I have iCloud active and dozens of apps, though I have never tried to share an iWork document to iwork.com from my iPhone before.
In fact, if I go to iWork.com on my Mac and enter in my details (and I have triple checked this) it says my Apple ID is not valid! Which it clearly is everywhere else and I can go to manage my Apple ID on my Mac no problem. There is no 'verify your email address' email in my inbox, (there really shouldn't need to be one anyway).
This would appear to be an issue where iWork.com seems not to be communicating properly with the servers holding Apple IDs, which doesn't make any sense.
Anyone have any explanation? The only thing I can think of is that perhaps iWork.com is going to get a revamp due to improved iCloud document sharing either following the March 7th announcement or along with the release of Mountain Lion in the summer and they are messing around with the servers.
Very frustrating in the meantime though!
iPhone 4, iOS Numbers, iOS 5.0.1, iCloud

Similar Messages

  • How can I purge a bad address from iPad Mail?

    I have entered a bad address for my husband, thinking it was his correct e-mail address. I finally figured out it was wrong(there was an extra letter in it) and I changed it in contacts to correct it(Mobile Me corrected it on all my devices).
    Now when I type in his name to send him an e-mail, iPad keeps wanting to send it to the old incorrect address, instead of the corrected address shown in contacts. Please tell me how I can purge the incorrect address from the mail program.

    The more times that you use the correct email address, the sooner the correct address should come up as the first option in the list. Still can't delete it, but eventually the correct address should pop up as the first option over the incorrect address.

  • I cannot add contacts to my address book from Mail?

    When I click on the email address down arrow and select add to address book I get no error message but the address does not get added to the contacts list. Please Help!!

    Same thing happens to me. Running 10.9.2 on Macbook Air. Everything worked fine up until a few weeks ago then it stopped behaving.

  • TS3899 Problems sending email from hotmail addresses in iPad Mail

    Hi
    I am having problems sending email from my hotmail addresses (live.com) in the Mail program on my iPad.  I get a message that says "An error occurred while sending this message".  Tis morning the program worked perfectly.  Now, not so much!
    I have turned my iPad off and on.  I have deleted and reinstalled the mail accounts.  Neither strategy helped.
    I have no problems with my gmail address.  I can send mail if I log on to the hotmail website in Safari.
    Any ideas?
    Thanks

    23circles:
    I would like to find a way to only have the gmail inbox but still send from any three of her accounts.
    You can do it this way:
    Set up only one account. The one from which you want to receive mail.
    In Mail > Preferences > Accounts > +gmail acct+ > Email Address insert the other email addresses, separating each with a comma and single space.
    Only the GMail account will receive incoming Mail. However, when you want to send from another address, in the From dropdown menu toggle the address from which you wish to send mail.
    You will, of course, delete the other accounts you have created to avoid getting incoming messages.
    cornelius

  • A constructor cannot specify a return type.

    I have a shuffleList.as file with this code...
    package {
    import flash.display.MovieClip;
    public class shuffleList extends MovieClip{
    function shuffleList(arr:Array):Array{
    var shuffled:Array = arr.slice();
    for (var i:int=0; i<arr.length; i++) {
    var element:Object = shuffled
    var rnd:int = Math.floor(arr.length * Math.random());
    shuffled = shuffled[rnd];
    shuffled[rnd] = element;
    return shuffled;
    In the first frame i put this code...
    import shuffleList
    var numA:Array = [0,1,2,3,4,5,6,7,8,9,10]
    var numB:Array = shuffleList(numB);
    var myText:String = numB.pop()
    fieldA.text = myText
    With this code I want to put in random order the numbers from
    0 to 10 in the fieldA.
    When run this file the compiler report this error: "A
    constructor cannot specify a return type."
    Where I'm wrong;
    I'm new in actionscript..
    Please help...

    Hey Petros,
    I had a similar problem and the response I got was:
    1) the constructor is used to set up the class but it doesn't
    really exist until it is instantiated and therefore cannot include
    any 'interaction' including a return.
    2) Therefore, you might try replacing
    function.shuffleList ... with
    function.shuffleList() { // to enable instantiation
    public function doit(arr:Array):Array { // to enable
    interaction
    The rest of the code follows this then the call in the first
    frame replaces
    var numB:Array ... with
    new shuffleList(); // instantiate the class
    var numB:Array = shuffleList.doit(numB) // interact with the
    class
    Let me know how it goes...Daniel

  • 'A return address was specified, which is not allo...

    I joined Skype on the 25th of November, 2010 and used it for a very short time only, and was fully satisfied with the product at that time.  
    On May 14, 2013, I purchased a one-year subscription with the intention of using it on a regular basis once a week at least. 
    My username was mentioned in the email I received in 2010, and by guesswork, I found the password that worked.  
    But the public library, using their wifi, I kept receiving a message: 
    'Sorry we cannot process your sign in request further A return address was specified, which is not allowed.'
    What does this mean?
    I'm using an ASUS laptop with Windows 8.

    are you trying to sign in using an email address where a Skype Name is expected?
    Regards,
    Neil

  • HT3952 When printing envelopes, I have a logo next to my name on the return address.   I would like to remove the logo but I cannot figure out how.   Any suggestions?

    When printing envelopes, I have a logo next to my name on the return address.   I would like to remove the logo but I cannot figure out how.   Any suggestions?

    Hi Shayes,
    You can change the default download location by going to ''Tools > Options > General''. The [[Options window - General panel]] has some extra information on all of the options available.
    Hopefully this helps!

  • Cannot display iCloud address list on Outlook2010

    My Outlook is working OK to insert e-mail address from the iCloud address list, and I was able to display the iCloud address list till yesterday.
    Yesterday, I did some cleanup on my PC, but now , I cannot DISPLAY iCloudAddress List, even though outlook is still able to insert e-mail addresses from the iCloud address list.
    I checked the iCloud Add-in, it  is ENABLED.
    Thus, need help with iCloud/ OUTLOOK:
    1) To Display iCloud Address list (in order to look at properties/telephones for any contact)
    2) How to syncronize local address list with iCloud Address List (some how iCloud managed to hi-jack all my contacts few months back when I enabled iCloud on my PC, I wish they only copied to iCloud)
    Thanks.......Rabrakha

    Unlike a computer, https://www.icloud.com isn't accessible from any iPad browser AFAIK and that's almost certainly by design. If you have iCloud set up properly, everything you do on the iPad is already syncing (mail, contacts, Pages, Photo Stream, etc.).
    You can also make any adjustments to your iCloud settings on the iPad. Settings > iCloud...
    So there doesn't seem to be a need to access iCloud via Safari (or any web browser) from the iPad.
    Others may figure out a work-around, but I'm not sure what it would accomplish.
    I can see the need on a computer...particularly if you don't have yours with you and you want to access your mail or contacts...but it seems redundant to do it on the iPad.
    Was there a reason you needed to have access with Safari?

  • How can I change the return address ?

    I have an email forwarding service with it's own email address. Any email sent there will forward the email to any address I specify. I want to be able to write messages from my Mail account and have the return address (i.e. when they reply it goes to the email forwarding service and will then be forwarded to my Mail address) be the one I use at the email forwarding service.
    I have tried changing the email address in Accounts/preferences/Account info to be my other email address but Mac email address and password is needed in those 2 fields to send mail . There is no other place (as far as I can see) to put my alternate email address.

    Whether the following process works depends on whether the outgoing server you normally use allows you to do this - some do, some don't.
    Create a new account in Mail Preferences>Accounts, The Description can be anything convenient, the Email Address is that which you want to use, and enter your name. For Incoming Mail Server, Usere Name and Password enter any old garbage (If you do this with more than one address the User Name garbage must be different for each of these accounts you set up).
    Set up the Outgoing Mail Server the same as the one you normally use.
    Now click on the 'Advanced' tab. Check 'Enable this account' but do not check 'Include when automatically checking for new messages' (or you will keep getting error messages on auto-checking. Note that if you manually 'Get all new mail' you will get error messages for these accounts).
    Now the domain addresses will appear as options in the 'From' drop-down menu beneath the Subject field.
    In Mail Preferences>Composing set 'Send new messages from' to 'Account of selected mailbox' and you should find that when replying the 'From' address matches the one the message was sent to.

  • Cannot create a new Offline Address Book

    I have 2 instances of Exchange Server installation  in one single organisation (by one per domain):
    1. Exchange 2010 Version 14.3 (Build 123.4).
    2. Echange 2013 Version 15.0 (Build 1044.25).
    I have created new OAB and arbitration mailbox following
    this article.
    It  is result of command:
    [PS] C:\Windows\system32>Get-Mailbox -Arbitration | where {$_.PersistedCapabilities -like "*oab*"} | ft name,servername
    Name ServerName
    BK Arbitration OAB vsrv-exbk
    But when i try generate new OAB using command:
    Update-OfflineAddressBook -Identity "OAB-FAB"
    I get this error message:
    Не удалось создать автономную адресную книгу "\OAB-FAB". Это может быть вызвано двумя причинами: служба помощников по обслуживанию почтовых ящиков не
     запущена на сервере "SRV-MAILBOX.xxx.local" или у вас нет разрешений на выполнение этой операции. Сообщение об ошибке: "Не удается вызвать службу по
    мощников по обслуживанию почтовых ящиков на сервере. 'SRV-MAILBOX.xxx.local': сбой. Ошибка RPC: -2147220990.".
        + CategoryInfo          : InvalidResult: (OAB-FAB:OfflineAddressBookIdParameter) [Update-OfflineAddressBook], LocalizedException
        + FullyQualifiedErrorId : [Server=VSRV-EXBK,RequestId=84bb0fb1-d6dd-4718-a704-4e9a20e178b6,TimeStamp=19.02.2015 12:07:00] [FailureCategory=Cmdle
       t-LocalizedException] 12FE7FE1,Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateOfflineAddressBook
        + PSComputerName        : vsrv-exbk.xxx.local
    Roughly translation from Russian is - "Cannot create a new Offline Address Book
    "\OAB-FAB" This may be caused to two reasons: the service "Mailbox Assistant service." did not started on "SRV-MAILBOX.xxx.local"
    server or you  do not have permission to perform this operation.
    I investigated this situation and found out that i have "Organisation Management" role on my account, and "Mailbox Assistant service." is started on server "SRV-MAILBOX.xxx.local".
    I try to restart the service but it does not fix this issue.
    Please help me ;)

    Hi,
    How did you create a new OAB and an OAB Generation Mailbox? When creating new OABs after Exchange CU5, we need to specify the GeneratingMailbox property.
    For example:
    New-Mailbox -Arbitration -Name "BK Arbitration OAB" -Database DB4 -UserPrincipalName [email protected] –DisplayName " BK Arbitration OAB"
    Set-Mailbox "BK Arbitration OAB" –Arbitration –OABGen $true
    New-OfflineAddressBook -Name "OAB-FAB" –GeneratingMailbox "CN= BK Arbitration OAB,CN=Users,DC=contoso,DC=com" –AddressLists "Default Global Address List"
    For more information, please refer to this article.
    http://blogs.technet.com/b/exchange/archive/2014/05/13/oab-improvements-in-exchange-2013-cumulative-update-5.aspx
    Best Regards.

  • Envelopes do not feed correctly on my HP5610 All in One printer and return addresses get chopped off

    I'm running a Windows 8 64 bit laptop and the feeder seems to grab the paper properly but it cuts off part of the return address all the time. I can push it in maybe and inch or so when the feeder starts to grab the paper and this will correct it, but it will cause a jam if it's pushed in too far. It did this on my previous Windows 7 machine as well.

    Hello @gttechnic , and welcome to the HP Forums, I hope you enjoy your experience!
    I can see from your post that you are running into envelope feed issues.  I'd like to help!
    I would recommend performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I'd also recommend the document below:
    'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
    Even though you aren't receiving this error, the steps should help.
    Please keep me posted, and remember, keep your stick on the ice!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Why does the correct return address not show up on outgoing messages?

    Hello,
    Specs:
    Windows NT
    iPlanet Messaging Server 5.1
    iPlanet Directory Server 4.13
    One user recently went through an account change (spam reasons).
    old uid: bob
    old email: [email protected]
    new uid: bsmith
    new email: [email protected]
    The problem is, that during testing, any email sent from the new account is arriving as having both the <Return-path> and <From> fields with the old email address.
    Keep in mind that this is not a client-specific problem as everything has been changed correctly (outlook) If an email goes from "Clients computer" >> "3rd party smtp server" >> "Hotmail" or the like, it shows up as having the correct return address.
    But the pickle I'm in, is that if an email goes from "Clients computer" >> "3rd party smtp server" >> "Our Server" , it shows up as having the OLD return address. - same thing if messages are sent internally (same server) through the webmail interface. The messaging server is somehow rewriting the email field when any message goes through it.
    What makes this a super-pickle is that this is a NEW account., not just a 'change' of the old one. The old account has been deleted, and the command 'imadmin user purge' doesn't find it, nor is there any reference to the old 'bob@' address in the ldif file except for an address book entry or two (other users have added 'bob' into their address book)
    Any help is greatly appreciated in advance. Sorry for the long description, but now all the bases I've covered are known.
    Sincerely,
    Josh

    Jay,
    I only mentioned SIMS 4.0 because I jumped directly from that to MS 6.0p1, and because what my customers wanted to do worked on SIMS and doesn't on MS6.
    To complicate things more, my customer has multiple domains, but not all employees have e-mail addresses in both domains. For example, Joe is [email protected], Jane is [email protected], and John wants mail sent to either [email protected] or [email protected] to come to him.
    I dealt with this by setting up abc & xyz as separate domains, and created a mailing list in xyz.com named "john" with an external member of [email protected] While this works fine, when I add an alias to that mailing list of "[email protected]" and John tries to send a message with "[email protected]" in the From, it is rewritten to [email protected] as that is his primary e-mail address.
    In looking at the LDAP entries of mailing lists that are not working as I'd like, I see that the aliases are specified as mailAlternateAddress attributes. Are you saying that if I change these to MailEquivalentAddress attributes that they will then show up in the From unchanged?
    Oh, and one more possible factor - they are sending mail using SMTP AUTH as they are roving users. Since the mail server knows that the authenticated user is truly [email protected], is that why his From of [email protected] gets nuked?
    Thanks,
    Bill

  • How to print return address labels

    How do I print return address labels

    Hello madrinky,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Contacts: Print contact information
    http://support.apple.com/kb/PH11608
    Mailing labels:
    Click Layout and choose a label type from the Page pop-up menu. To set page margins and gutter space between labels, and how many labels to print per page, choose Define Custom. 
    Click Label and choose the address to print from the Addresses pop-up menu (for example, print a label for each contact’s home address). Use other Label options to specify the print order, include a company for business mailings or a country for international mailings, or add a graphic.
    Best of luck,
    Mario

  • Adobe Interactive Forms displaying returned tables

    can anyone help me display returned tables in adobe
    interactive forms
    i have an 2 adobe interactive forms, one for input
    the other for output on 2 different views
    the input form takes a few parameters, calls the
    back end RFC and the
    output form displays okay, but i just get the last
    row from the table
    i've tried binding 1 of the output table parameters to a drop down box and subform,the drop down box displays
    one of the return parameters but will not drop down
    whenever i include a subform i get a java error on
    the output form with no display
    i know there are several rows returned from testing the rfc inside abap workbench

    Hi Dennis,
    To display table in Adobe forms.
    Follow these steps :
    1. Insert one sub furm.
    2. make its type to flow content and flow direction to Table in object property.
    3. Insert another subform in above sub form and makes its type to flow content and flow direction  to Table row.
    4.In binding tab for this subform check the checkbox for "Repeat subform for each Data Item" and in min count you can specify at a time how much rows you want to display.
    5. Now place your UI Elements for Data view into this sub form.
    6. format these ui elements as you required.
    Run application now u can see multiple rows in adobe forms, if you have multiple elements in your table node.
    Let me know the status.
    Regards,
    Bhavik

  • Problems printing envelope from pdf file with logo & return address.

    I have the 6310 All-In-One Printer. I am experiencing major problems printing envelopes (standard size, #10) from a pdf file that is setup with a business logo, name , and address. First of all, the User Guide on page 63 directs you to load the envelope with the flaps up and on the left. This prints out return address in the lower right corner of the envelope front. I have insert the envelope opposite to the User Guide to get the information printed in the correct location, the upper left corner.
    Bigger problem - The logo, which is placed to the left of the business name and address will NOT print out. My preview printer window shows the logo, but it will not print. I cannot figure out what I am doing wrong.
    Suggestions???

    Kindly follow the steps here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01096354&tmp_task=useCategory&cc=au&dlc=en&lang...
    supported envelopes:
    Envelopes U.S. 10: 105 x 241 mm (4.125 x 9.5 inches)
    U.S. 9: 98 x 225 mm (3.9 x 8.9 inches)
    A2: 111 x 146 mm (4.4 x 5.8 inches)
    DL: 110 x 220 mm (4.3 x 8.7 inches)
    C6: 114 x 162 mm (4.5 x 6.4 inches)
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

Maybe you are looking for