I cannot start iphoto. I get an error message saying that it is in uso
I cannot start iphoto. I get an error message saying that it is in use by another application or it has become unreadable. What do I do to
correct this problem?
What version of iPhoto? Restore from back up is always the simple solution.
Similar Messages
-
When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?
It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive. Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
OT -
I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
HT201210 i get an error message saying that a session could not be started.
i am using an iphone 3g. i am only trying to get the iphone to work as an ipod. it has been reset and when i try to restore it i get an error message saying that cant continue with activation at this time try again later. i am trying to fix that rror by updating the iphone. that is when i get the error stating that they cant start a session. i tried a couple fixes but i dont know how
Same - with latest Itunes version 10, iphone 3gs, ipad 2 and new ipad all on iOS6. Tried rebooting attached, not attached, even reinstalled itunes. same problem - will sync fine but refuses to backup or restore. Windows 7 also. Itunes bug since the last version 10. Also restarted the Apple Mobile device service to no avail.
-
When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.
I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck! -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."
-
I'm unable to play approx. half the songs in my library. I get an error message saying that the original file could not be located. I am asked if I want to locate the file, I click locate and get a screen with a list of confusing looking files and nothing seems to solve the problem. As is probably apparent by now I am not particularly computer literate. I don't understand why this problem occurs on only half my library.
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
Turning on my computer I get an error message saying that the procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? What do I need to do?
Hi Hans - I'll do my best
First I assume you are logged in as adminstrator on the computer you are using. You mention only seeing Mojo Pac in your Program Files, but there would be far more programs listed there. There are several ways you can find your Apple Application Support file folder.
For Windows XP - How to Search for a File or Folder
To search for a file or folder:
Click Start, and then click Search.
In the Search Companion dialog box, click All files and folders.
Type part or all of the name of the file or folder, or type a word or phrase that is in the file.
So in your case it would be Apple Application Support.
If it doesn't show, you will need to make sure that you have enabled the search for hidden files or folders.
To search for hidden or system files in Windows XP:
Click Start, click Search, click All files and folders, and then click More advanced options.
Click to select the Search system folders and Search hidden files and folders check boxes.
Then search again for the Apple Application Support folder.
I'm assuming that you will locate it. Once you have done so - click on it to open it in Windows Explorer.
Then you should locate libxml2.dll - right click on it and select (left click) Copy
On the left side of the window, under Apple Application Support folder, you should see Mobile Device Support - Right Click on it - Select (Left Click) on Paste.
Start your iTunes programme.
Good Luck and let me know how you get on. -
Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?
If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]] -
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?
Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling -
I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you
Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
Thank you @dj_paige -
When I try to update my ipad with the latest software, I get an error message saying that the internet timed out. What can I do?
The update file is around 700 megs so if you're on a slow connection it does time out. You can also look into your anti virus software or firewall, it might be blocking the file. Also if you're trying to download it over 3G it won't work. There's a 20 meg cap on all 3G downloads.
-
When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!
Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel
Maybe you are looking for
-
So, I bought a new Macbook Pro which i cannot authorize my itunes for. I don't even have the button indicated in the support section to authorize or deauthorize. I only have one device authorized to my account. I cant remember my security questions a
-
Turn off "Are you Sure" Warning Deleting Junk Mail
In MS Oultook you can turn off the "are you sure" warning when you want to empty the trash or erase junk mail. Can you do it Mail on a Mac? I've been through the Preferences and tried Googling it, but I don't find anything.
-
Dynamic VLAN assignment and DHCP
Hello I have just upgraded our WLC from 4.0 to 7.0 (via 4.2). Before the upgrade we had our ACS returning a VLAN based on user group. This seemed to be working without an issue. Now that the WLC is on version 7 this is no longer working correctly.
-
I cannot updated itunes 10.6.3. I receive no errors. I repaired all of the apple programs as suggested in other discussions but it still don't work. Do I need to uninstall and start over again?
-
Hello, After unpacking found the lcd panel is faulty.After complain ,followup and several mails panel was replaced.OMG at the time of replcement service engg has broken the m/b connector but could not identified because intial setup was corrupted.Ag