I cannot turn my iSight Camera off

The green light is on when I start the mac and turning on photo booth or iMovie does not disable it ... how can I "fix'' this?

James, had the same thing happen and shutting down, then booting again (not restarting), solved it. Hope this helps!
whitebook 2.0Ghz - 4H622   Mac OS X (10.4.7)   2GB RAM

Similar Messages

  • I cannot change my "show caller ID". Under my number it says "Unknown", and I cannot change it. Under "shoe my caller ID" I cannot turn it on and off. Can you help me? THanks

    I cannot change my "show caller ID". Under my number it says "Unknown", and I cannot change it. Under "shoe my caller ID" I cannot turn it on and off. Can you help me? THanks

    Hello,
    Tried rebooting and updating, doesn't work. There is no problem with calling and receiving calls, but my number is blocked, and I cannot turn it on or change it in settings. Can this be fixed?
    Thanks

  • I cannot turn the volume limit off on my iPad.  Help!!

    I cannot turn the volume limit off on my iPad.  Help!!

    Same issue here, once you click on volume limiter there is no choice to disable, the bar is grayed out.
    I took a screen shot but unable to paste.  iOS 6 might have been pushed out too early, lot of bugs.  Very frustrating, fix better happen soon.

  • MacBook built-in iSight camera off center

    Hi Folks,
    Is there any way to re-align the built in iSight camera on a MacBook? In order to be centered in the image, I have to turn my MacBook about 8 or 9 degrees to the left. If I am sitting directly in front of the camera, I am off-center. Any help is appreciated. My girlfriend and I both have MacBooks, and her camera appears to be aligned properly.
    Mark
    MacBook   Mac OS X (10.4.8)  

    Call apple support, I wouldnt try realigning it myself, otherwise if you do end up needing apples help they can blaim you by "offcentering it in the first place" sorta thing...

  • Isight Camera Off

    OK, gang, sorry if this question is a repeated one, but I went through 7 of the 33 pages and failed to find a helpful answer, so here's my problem.
    The first time I plugged my camera in and turned on ichat, then hit the video I was amazed at how trouble free and simple it worked. I recently moved my computer from one room to another, plugged everything in the same except now when I open Ichat and hit the video there is no picture and just a black screen that says "Camera Off". Any ideas how I turn the damned camera back on again? I tried plugging it into a couple of different slots and no go. Anyone else solve this problem?

    Well answered, Ted! +++
    (Gregor, the answer is in your iSight Users Guide (Manual). If you can't find yours, you can download a current one from http://images.apple.com/support/isight/iSightUserGuide.pdf.)
    Happy Holidays to you both!
    Jim

  • Turn green isight light off when recording.

    hi there,
    I'm setting up a nanny cam with my laptop, and don't want the green light to be on when recording, how could i turn that off for the time being.
    thanks.
    tt

    Why not just cover it. Tiny piece of duck tape or sticky. Much simpler.
    The green light is always activated when the iSight is on. I know of no way of deactivating it while the iSight is on. You may wish to do a Google search for some hack that may do this.

  • Pavillion dv9000 clicking from speakers cannot turn sound of clicking off

    speed of clicking starts slowly very annoying, interrupts using any itunes or playing music from pc with this clicking noise starts from right hand side of speaker then on left hand side creating an even more annoying sound. when i close laptop it stops for a few seconds then restarts again... help!!!! volume switch will not turn this clicking off!!!

    Me too, i have the same problem with my exernal speakers, but the speakers click also when the mac is on and the volume is on mute. The noise is not regular but it happens frequently (every 4-5 secs). Please help, i have it since 2 weeks its new!

  • Cannot use two iSight cameras at the same time

    I use an external display on my laptop. Close the lid and work on the external display. I connect an external iSight, and a message says that the camera is already in use?!
    Can I not use two iSights at the same time?

    Hello Webmaster
    You can have two iSights connected at one time, but, as explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by one application at a time. (my emphasis) Check for any running applications, Login Items, or widgets that can use your iSight. (It is easy to forget widgets like Mirror in your Dashboard.)
    Different apps select between multiple connected cameras in different ways. For instance, you use iChat > Preferences... > Video settings to select which camera to use, but iMovie 6 uses a drop-down menu as shown in this picture:
    The suggestions in How to Troubleshoot iSight should help you determine whether one of your iSights is causing trouble. I suggest you test each one separately and without your external display or other peripherals to rule out possible conflicts like the one that user BombCreative reports in his post at http://discussions.apple.com/message.jspa?messageID=5868843#5868843
    After you are certain that your iSights are working individually, test them when both are connected. After your system successfully passes these tests, you can add your external devices back one-by-one to be sure one of them is not causing the problem.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • Cannot find an isight camera what other options do you recommend?

    I heard the isight was the best but the apple guy told me they no longer make it as a stand alone.
    Any suggestions would be great.
    Thanks in advance and have a great weekend.
    PS: does anyone know if apple is going to make something similiar down the road as a stand alone?

    I was told that the problem with the isight is that it contains mercury. New environmental regulations, in Europe for example, mean that importing mercury containing items has become near impossible. I doubt if there will be a future stand alone isight.
    But you can still find some isights in countries that do not follow the same regulations. I got mine in December while travelling in Taiwan. It took a bit of phoning around (called 5 stores) but I located 2 isights. If you know anyone travelling to Asia, ask them to look around for you.

  • HT4995 I cannot turn my location service off

    My location services seem to be in a default type mode...they are basically locked into a on position with the various apps either on or off for the location function...any ideas?

    ooops sorry, its settings, general,restriction passcode 0000. have a good day

  • Power Nap is not working? and I cannot turn it on or off?

    I Have no option in power saver about power nap and it has not been updating when put to sleep.
    I am on a MacBook Pro

    Welcome to Apple Communities
    This feature is for Mid 2011 or later MacBook Air and Retina MacBook Pro

  • Isight camera can't turn off

    Hi,
    I was hoping you might be able to help, I am having problems turning my isight camera off, i didn't turn it on and am not sure how to turn it off as I can't see any application windows,
    I'd really appreciate your help,
    best wishes
    katrina

    Hi Katrina, you may need to have it serviced...
    http://discussions.apple.com/thread.jspa?messageID=8955538
    http://discussions.apple.com/thread.jspa?messageID=8957727
    But if you just want to diasable it...
    http://osxdaily.com/2007/03/26/how-to-disable-the-built-in-isight-camera/
    http://codesnippets.joyent.com/posts/show/1053

  • I cannot turn off my ipod nano

    I cannot turn my ipod nano off.  It is frozen...

    Try resetting it. If it is a 6th gen, hold down the volume down and sleep/wake button until it restarts.
    i

  • Can not turn on isight in AIM Windows

    I can not get built in isight to turn on in AIM 6.0 or 5.9 in windows on my macbook pro. I am using boot camp and windows XP Pro. I have set prefs to use isight and all the tests turn on isight camera but not when using AIM. We are trying to comunicate with nephew in service who only has windows and so far AIM is the only thing that I can find that supports Audio/video. Thanks Carl

    Hi Carl.
    Until someone who uses a macbook pro posts an answer, I can offer a couple of alternatives.
    (1) If your nephew in service who has windows can install AIM 5.9 on his PC, your Mac's iChat application can connect to him. Some users report difficulty making the connection, but for most of us, iChat on a Mac works fine for text and AV connections with an XP Pro PC running AIM 5.9.
    AIM 5.9 does not support audio only to iChat.
    AIM Triton / AIM 6.x does NOT work with iChat.
    Reboot your Mac into OS X and launch iChat. You can use your existing AIM account name to log in to AIM via iChat. If you need more setup help than your Mac's iChat > iChat Help gives you, see this setup guide.
    A note for readers considering the FREE dot Mac account name mentioned in the linked setup guide. The free dot Mac trial name or your existing dot Mac account name will continue to work as an iChat account name even if you let your paid dot Mac account lapse or decide not to pay for dot Mac features at the end of the 60 day trial. Your dot Mac screen-name will continue to work as an iChat name even after the trial period ends and your other dot Mac services expire.
    (2) If you have difficulty with the iChat <-> AIM 5.9 connection, and if your nephew is authorized to load other applications on his PC, you can use Skype. You will need to download and install the OS X version of Skype, and your nephew will download and install the version for Windows XP Pro.
    Many who post here report that Skype offers easier cross-platform connections. In my testing, Skype video chat is usually of lower quality than iChat's, but it is certainly useable if iChat cannot make a viable connection.
    Although Skype's web site mostly discusses its ability to call telephones from your computer for a fee, computer-to-computer calls, video chats, and text messaging are free. Skype's web site also offers a great help section.
    If you cannot get your XP software working, you might consider these alternatives.
    Cheers.
    Jim
      Mac OS X (10.4.8)    G5 DP 1.8   External iSight

  • Is there a way to turn off and On the isight camera or app to do it ?????

    Hi
    Does anyone know either of a Simple way to Turn off the isight camera on a Macbook pro (3.1 model with Snow leopard) or a simple program or Widget to do this ??
    I have already Googled this but cannot find much - except disable certain files, or a Applescript by Techslaves.org called isight disabler , which seems great except I have to run applescript each time run this script, put in password, then select !
    SO is there a Basic app or even a Way of making the isight disabler work like a simple app - or a way to do with Mac's settings ??
    Any help is Appriciated
    Thanks Mark

    Globalmark wrote:
    Hi
    Does anyone know either of a Simple way to Turn off the isight camera on a Macbook pro (3.1 model with Snow leopard) or a simple program or Widget to do this ??
    I have already Googled this but cannot find much - except disable certain files, or a Applescript by Techslaves.org called isight disabler , which seems great except I have to run applescript each time run this script, put in password, then select !
    SO is there a Basic app or even a Way of making the isight disabler work like a simple app - or a way to do with Mac's settings ??
    Any help is Appriciated
    Thanks Mark
    Barring some unusual circumstance, there should be no need to disable your built-in iSight because YOU decide when to use your iSight.
    Some apps such as iChat allow you to enable and disable the webcam from menu commands.
    Other apps such as Photo Booth only use the camera when you click the button.
    However, if you REALLY want to disable, scripts like this one can easily disable and enable iSight.
      http://techslaves.org/index.php?page=62
    However, be aware that it simultaneously disables ALL USB webcams when active.
    Although I do not recommend it, you can manually disable your built-in iSight by removing the "QuickTimeUSBVDCDIgitizer.component" file from your computer's HardDriveName > System > Library > QuickTime folder and restarting your Mac. Your built-in iSight should no longer work with any app.
    P.S. Manually moving, renaming, or deleting files outside your Username/Documents folder
       is generally a BAD idea unless you KNOW how it will effect OS X.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Maybe you are looking for

  • Purchase Order Number in Vendor Line Item (FBl1N) and Clear Vendor (F-44)

    Hello, I am not getting the Purchase Order Number in Vendor Line Item.(FBl1N). Also during Clear of Vendor through F-44 i am not able to identify the Line item on the basis of Purchase Order Number. Could any one pleae help me out on this issue as i

  • Touchpad stop response ...

    Pressing power + center button did bring the hp logo back and did go into the home screen. However,  touching screen app still have no response. only pressing the center button can toggle between launcher and home screen now. How can I do? I don't mi

  • Cannot connect to DB post installation

    Hi All, I have a home PC on which i have installed CentOS 6 Linux. In this i have installed oracle 11gR2. After installation i am trying to connect to that server from my windows laptop. when i am trying to connect from SQL developer. when i trying t

  • New PowerBook Ti User Wants Input on BEST Carrying Case

    Just got a beautiful 15-inch Titanium, hardly used! I'm so excited, but have become quickly confused about choosing a PowerBook Case and additional accessories. This is my first notebook, so every case, stand, pad, skin, protector I read about sounds

  • CE portal vs regular portal

    Hi, CE 7.1 comes with a simplified portal. The CE portal cannot be used as the main portal, a FPN has to be set up between the main 7.0 and the CE 7.1 portal. This makes sense now, when 7.1 runs on JEE5, but when there will be a generally available E