I cannot turn off the wireless synchronization on my Blackberry 8300 device. Please help!

I have tried and tried everything I can think of.  I have read many posts on this topic already and nothing is helping.  Does anyone know how to do this?   I have gone to the address book, then option, but there is nothing that says wireless synchronization.  Even my device, when I searched on it, tells me to do this, but it's not there.   I am wanting to be able to see my address book on my desktop but I cannot do this without turning this off.  Thank you for your help.

ok, IF you have all your data up-to-date in Outlook, I will recommend deleting your BB Address Database and re-syncing with Outlook. But you must first have Outlook completely up to date. See below:
(ignore the mention of the calendar below... this just works the same way)
If you are having errors in your Calendar or Address Book on your BlackBerry, and you wish to delete the entire Calendar (or Address Book) database on your BlackBerry, follow the directions below. Make certain you have a good copy of your Calendar or Contacts elsewhere, as this procedure will complete delete ALL Calendar entries and/or Address Book entries on your BlackBerry.
1. Open Desktop Manager on your PC.
2. Open up Backup/Restore > Advanced.
3. From Advanced you'll see a split pane screen. The left pain is what is going to be backed up from your device and the right is a list of the currently existing databases.
3. Highlight on the right side your Address Book database (or your Calendar database) and click the arrow in the middle pointing to the left. This will copy the information over and prepare it for back-up.
4. Once the back-up has completed, hit the Clear button at the bottom to erase and clean out the entire address book database (or Calendar database).
5. After it's finished, it will ask you if you want to save the back-up you've created, say yes and check the device to make sure the address book (or calendar) has been properly cleared out. Now, resync the necessary contact information and you should be set to go.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Please help me to find out how to turn off the shuffle feature on my touch i-pod, Please help me to find out how to turn off the shuffle feature on my touch i-pod

    Please help me to find out how to turn off the shuffle feature on my I-pod nano ... THANK YOU!!!!!! :)

    Just figured it out :) Thanks though!!!

  • How can I turn off the wireless modem on my HPG5200uk Desktop?

    How can I turn off the wireless modem on my HPG5200uk Desktop? I have an ethernet connection, and don't want to be blasted by unnecessary radio waves.
    This question was solved.
    View Solution.

    Hi,
    You may not have a wireless network adapter.
    If it is not in Network Adapters and you have no Device Manager errors or disabled devices under Network Adapters then that would be the case.
    Jaco
    Errare humanum est.

  • The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't work.  All software is updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

  • Is it possible to turn off the wireless signal on the Airport Extreme?

    Is it possible to temporarily turn off the wireless signal being emitted from an Airport Extreme whilst still remaining connected to the internet via ethernet? If so, what do you need to do to turn off the wireless signal?
    Also, how strong is the wireless signal? If placed in a basement of a residential property, is it likely that the signal would reach two floors above?
    Thanks very much for your answers.

    Welcome to the discussions!
    Is it possible to temporarily turn off the wireless signal being emitted from an Airport Extreme whilst still remaining connected to the internet via ethernet? If so, what do you need to do to turn off the wireless signal?
    Open AirPort Utility - Click Manual Setup
    Click the Wireless tab located just under the row of icons
    Wireless Mode = None
    Update to save your new settings
    You can reverse the process to turn the wireless back on when you are ready.
    Also, how strong is the wireless signal? If placed in a basement of a residential property, is it likely that the signal would reach two floors above?
    It's just not possible to accurately predict wireless performance in advance for any installation. A guess would be that the signal will be very weak, and likely unusable, but you won't know for sure until you try it out in your house.
    Message was edited by: Bob Timmons

  • Turning off the Wireless signal light on front of router

    Is there a way to turn off the wireless signal light on front of router that constantly flickers when using wireless, want to know this so i can use wireless without being recognized.
    Thanks

    Put an electrical tape over it.

  • HT4623 I cannot turn off the passcode which I do not want on my ipad.  I keep getting the message "ipad is disabled" I have tried to enter the passcode that I entered when I updated to iOs7 and cannt get to the settings page.  Can someone help me?

    I cannot turn off the asscode which I do not want on mhy ipad.  I keep getting a message "iPad is disabled".  Yesterday, I updated to iOS7 and was asked
    to enter a 4 digit passcode and now  I type in the 4 digits and the ipad will not accept it.  I want to get to the settings page.  Can someone help me?
    Thanks.

    hope you didn't have GREEK keyboard selected
    If you did APple do not want to know that their upgrade has trashed your ipad
    search on  ios 7  ipad  greek keyboard
    to see other sufferers - if you had a greek keyboard then you need to set it to english/french etc
    to do that you need to unlock your ipad
    to unlock your ipad you need to re-set your keyboard
    to do that you need a greek keboard
    to get your greek keyboard back you need to unlock your ipad
    and so on and son
    thank you apple

  • Turn off the wireless??

    EveningNew to forums and new to Sky (came from BT after many years) so hello to you all. Not going to knock Sky (yet) but just have a quick question; On my old BT router you could turn off the wireless signal between certain times which made it easier for us as the children could not access I-Pods etc after lights out but still use the broadband cabled into my PC. Is anyone aware of a similar feature on the Sky router - I have had a quick look but cant find anything... Thanks in advance

    Hello All,
    Thanks for getting in  touch.
    @Gary0903, great to see that you have joined Sky Broadband. Thanks for your feedback with regards to the timer, I can certainly pass this feedback on to the relevant team. In the meantime it would require you to manually go in to turn the wireless on and off using the details that stantheman2k12 supplied.
    @SkyMJR, welcome to Sky have you managed to run through the steps that stantheman2k12 has supplied to turn the wireless off at certain times? There is no current timer that can be set to do this automatically.
    @deecorbett123, I hope you have managed to turn the wireless back on. As caesarome has mentioned you required a direct connection to the router to allow access the router status page (192.168.0.1) to turn the wireless back on.
    If you have any further queries please get back to us.
    Thanks,

  • HT1212 iPhone5, the screen is damaged, never synced to iTunes, locked screen, cannot turn off the device...

    iPhone5, the screen is damaged, never synced to iTunes, locked screen, cannot turn off the device...

    No. I would never take an iPhone to anyone other than Apple unless there was no alternative. You can get the display replaced on an iPhone 5 at most Apple stores for $149. If there's more damage, it will cost $229 for a full replacement. Both prices assuming you don't have AppleCare+.
    As I said, taking it elsewhere forfeits your ability to ever get it serviced by Apple. Apple does not sell iPhone parts. There are no legitimate sources for iPhone parts. All the parts you will find are either salvaged from damaged phones or counterfeit.
    If the phone is at all functional, you may be able to plug it into a computer and extract the photos and videos from the camera roll.

  • Can I turn off the wireless and use the wired connections at the same time?

    Can I turn off the wireless and use the wired connections at the same time?
    This is to avoid transmission when I work without the need for wireless

    Yes, you can. Just open the web interface of the router. On your browser type the IP address of your router, usually http://192.168.1.1 go to wireless tab and disable it.

  • Hi why cannot turn off the zoom switch

          Hi why cannot turn off the zoom switch and maybe is affecting the waze app the screen is half black only in these app  , but for example whe I tried to add the photo below the menu to add the photo just appear half and I couldn't read the right portion of it like it is out of focus I tried several times

    HI and welcome to Apple Discussions...
    Perhaps you have an app running. Try force quitting.
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until you see the Apple logo.
    If that doesn't make a difference, reset your iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds until you see the Apple logo.
    Make sure your iPad software is up to date. Connect the iPad to your computer. Launch iTunes if it doesn't open automatically. Under the Summary tab click: Check for Update
    Carolyn

  • IPAD Mini Freezing up in installation mode as it is installing Update iOS 8.1.3 . I cannot turn off the iPAD Mini .  How do I resolve this problem?

    iPAD Mini purchased for Xmas 2013 is freezing as it tries to complete the installation of the iOS update 8.1.3.  The screen his frozen on the installation mode and I cannot turn off the iPAD Mini.  How do I turn off the iPAD Mini and resolve this problem?

    Try a reset, hold the power button and home button until you see the apple then let go. Also, it is iOS 8.2 that you are trying to install since that is the current version. I had no problems updating my mini today so hopefully yours will go well too.

  • TS1567 I have tried manually removing itunes and reinstalling. i have gone through the sevices anf tried turning on the AMDS. i have tried turning off the firewall. i have tried restoring my device. i have tried "fixing" the AMDS in the add/remove program

    I have tried manually removing itunes and reinstalling. i have gone through the sevices anf tried turning on the AMDS. i have tried turning off the firewall. i have tried restoring my device. i have tried "fixing" the AMDS in the add/remove programs. I have tried using a different device. i have tried using a different cable. I have tried all of the steps given in the link supplied by Apple. None of these things have fixed my problem. I still have the Error Message "The Apple Mobile Device Service started then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs or Alerts service. I am using Windows XP. I am leaning towards a last resort which would be to wipe my hard drive and start from scratch. Does anyone have a solution?

    chicx wrote:
    This is the third time of writing this on your Apple Support Communities!
    Not with your current user id.
    Far too much uneccesary information in your post, which only confuses things, a vast amount!
    Let's start with iTunes.
    Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
    With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
    Once you have doen those two things, check to see if the iPod is seen by iTunes.
    chicx wrote:
    By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
    Really?
    OS stands for Operating System. (In computer speak, IO means Input/Output.)
    iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
    I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

  • My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help

    My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Can I turn off the wireless on my Time capsule? Could I then use it as an XHD backup on a different wifi router network?

    I would like to turn off the wifi on my Time Capsule, use another, more powerful router, but still use the TC  as an XHD for backing up my files. Is this possible?  thanks.

    The TC is now and always a network drive.. but there is no reason you cannot turn off wifi in the TC and use it plugged into another router. The only thing I would say is that using the TC wireless can still be worthwhile.. if you can get it close enough to the computer, then either ethernet or TC wireless will prevent the backups from slowing your network..
    If you are going to use it on only a single computer, you can plug it in by ethernet and setup as a secondary network.. but IMHO you may as well buy a USB drive and be done with it. The external drive is faster and more reliable for backups than the network drive.

Maybe you are looking for

  • Error while executing a java command

    Hi, When i am trying to excute the below i am geeting the error message Can some please help me in resolving this Command executed: java -jar eulbuilder.jar -connect user/a_password@instance Error: Picked up JAVAOPTIONS: -Dawt.toolkit=mercury.awt.awt

  • Sales Order - Create With Reference

    Hi, Plz look into the below scenario, I Create a Sales Order 1 (Manufacturing Order) with Qty 10. When i create a Sales Order 2 (Call of Order) with reference to SO1, automatically Qty 10 comes up in the Qty Field. Assume i created a SO2 with Qty 3.

  • Report balance output

    hi, Good day to all! i created one vendor report but i need net balnce post date,   debits , credits , balnce( debit-credit), net balance 01.01.2008, 2000, 1000      1000  02.01.2008 ,3000,  4000   -1000 03.01.2008  5000  2000     3000               

  • Logging & Tracing - Location.getLocation(????????????????)

    Hi! I have a java File *.java  which is inside of Developments src/packages/....... The problem is now that I would like trace some methods and variables of this class(*.java ). But I can't use - >  wdThis.wdGetIPersonController().getLocation() in th

  • How to get record count value in variable

    Hi, i wanted to capture record count value in the variable? Please let me know how to do this? Thanks, jag