I cannot turn on my ipod touch. the apple logo appears but does nothing after and when connected to the computer, it is nor recognize. what's the solution for this?
how to fix ipod touch if it hungs/ does not turn on and stays only on the apple logo when you press/hold the keys home and sleep/wake. and when connected to the computer, it does not appear in the itunes that the ipod is connected or simply the computer does not recognize the device. i barely need you help guys! please...
I found this possible solution on another support thread, so I tried it.
turn off iPod
hold Sleep and Home buttons to start it.
When Apple appears, let go of Sleep button, but keep holding Home button.
When screen goes blank, let go of Home button.
Connect cable and check iTunes to see if it has conencted.
This did not work for me.
I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
I connected them with the cable, and it works like normal. :-)
Similar Messages
-
It wont charge but it is syncing, I recently updated Itunes, and the charging icon shows up on iTunes
Did you try another USB port or the wall adapter, or another USB cable?
Also see if a reset may help. To reset the iPod hold the sleep and home button for about 10 sec, until the Apple logo comes back again. You will not lose data doing a reset. -
When I turn on my ipod touch the screen goes white and stays white.
When I turn on my ipod touch the screen goes white and stays white. It plays but all I see on the screen is white. I cannot change anything.
It iTunes is asking to enter the passcode then:
- A data recovery company may be able to help
- Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone. -
I tried updating my iPod touch to the newest update. But my iPod was unable to complete the update. Now my iPod doesn't turn on completely. The apple logo appears but then the screen goes blank. I've tried charging it, letting it discharge, I've tried things I found on the internet but nothing seems to be working. What can I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Original text by lllaass
-Ethan -
My iPod touch 4G will not charge. I charged it and when I got it off charge it was really hot but showed it was fully charge then when I turned it on again the battery was dead. Now it won't charge. Please help thanks!
Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.
I suspect you have a hardware problem. -
I cannot get my sons iPod touch to unlock. He has forgot his password and I have not synced his iPod to my new computer. I put it in recovery mode but it is still asking for his password. Any idea what to do next???
Try DFU mode instead.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
whenever i connect my ipod touch 3rd gen to itunes itunes responds really slowly and when i try and sync it it says sync in progress on my ipod screen but then is stuck with "verifying "matts ipod" at the top of itunes and stays like that for ages.. help
You buy one and only one download.
As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
http://www.apple.com/support/itunes -
Ipod touch's apple logo in back side is scratched.
iPod touch's apple logo in back side(rear) is scratched. i want to repair this perfect.
And I want to repair other scratch too... What can I do about that?
I am Korean,,, I don't know English about that...T.T please understanding me well...I believe you're south corean, right? Are there any Apple Stores in South Corea? If not, go to the place where you bought your iPod, and talk to them about that.
Much more productive than talking to someone that's sitting in front of a computer, on the other side of the world (i.e. Portugal) -
hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
i got Mac originally version is 10.6 and have upgrate to 10.6.8 and than i continue updating to 10.8 and this kind of message always appear until i turn off and turn it on. what is the solution for this message
This message?
http://support.apple.com/kb/TA20920
is a difficult one to resolve.
There is an analysis and suggestions to this problem posted here.
http://www.thexlab.com/faqs/kernelpanics.html -
For the second time this week i don't get any sound from my iPad 2. Who has the solution for this problem?
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
RaghavendarHi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support -
I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!
Cc2528 wrote:
The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
but I would be more inclined to to the factory reset and start afresh. -
Why doesn't my iPhone 4 have an 'Internet tethering' options? Is it carrier related or iOs related? Please help me find the solution for this. thanx
Personal Hot spot
http://support.apple.com/kb/HT3574
Understanding
http://support.apple.com/kb/HT4517
Trouble Shooting
http://support.apple.com/kb/TS2756 -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple
Maybe you are looking for
-
How big of a hard drive can I use?
Hi Folks, I would like to upgrade as the 160Gig drive I have is plum full. How big can I go in a T41,, 500, 650, 1T? Am I at the limit now? Thanks!
-
Exporting HDMI bluray Video from desktop to tv
I would like to use my ENVY 23 with Windows 8.1 as a bluray player but export it to my tv. I can't seem to figure out how to do it or if it is possible. Thankful for any help
-
Why can others not open a PDF after I have digitally signed it.
I have a PDF that I have digitally signed that others users, MACS and WINDOWS can not open after my signature is applied on my computer. I can still open and view the document with no problem. I have been able to successfully sign the document on a
-
How to check CRL validity time from client?
Hello, I have one Windows Server 2003 R2 working as Standalone CA. It provides certificate for one of our internal IIS website. I have decreased CRL publish interval from 1 week -> 1 day and Published new CRL. However, our webserver is propably not a
-
I have recently upgraded to FCS3 from FCS2 and now when I export a Quicktime movie from Motion the quality is very poor no matter what settings I use. The resulting output appears to be outputting at 'Draft' quality despite it being set to 'Best' in