I cannot turn up the volume during a phone call

My "+" button on the side of my phone is broken and I cannot turn up the volume during a phone call. Is there any other way to control the volume during phone calls?

After trying everything I gave up.
But just 5 minutes ago... I dropped by phone on the floor, not from high, just sitting on my chair at my pc desk...
And someone just called and i can hear them!!!
So...
for me, i guess it was really a piece inside that wasn't making a good connection and well...
I accidentally fixed it...
But I wouldn't reccomend you to drop it on purpose.
But maybe go to your nearest apple store, ask them to open it and see if everythin is in place inside?
cheers

Similar Messages

  • I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    Have you tried:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • How can I turn off the volume limitor on my ipod nano?  I want to play it with a docking station, it is no where near as loud as an old 4GB ipod!

    Hello, please can you tell me how to turn off the volume limiotr on my ipod nano?  I want to play it on a docking station and it just isn't as loud as I want it to be.  An old ipod is much louder.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • How can I turn up the volume of music on my ipod?   how about with I-trip?

    I have certain songs that just do not get loud enough to hear and I am not sure why. They come out just fine if I put them on a cd and play them that way. However on the ipod and trough my i-trip for the car they are extremely low and some are practically inaudible. Any help would be appreciated. Thanks for your time.. one and all. Kat

    Hi Kat, welcome to the fourms.
    Have you tryed turing up the volume on your iPod itself? Or turning up the volume in the car?
    There is another way to adjust the volume. If you go into iTunes. Right click on a song. Then you can select "get info". When that pops up, select "Options", then you can adjust the volume there.
    If you want to do it to your entire library, or a ig ammount of songs. Select the entire list of songs that you want, then right click and get info. A box should pop up saying something like "You are about to edit info for multiple songs. Do you want to continue", then click yes, and you can adjust multiple songs that way.

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • Turn down the volume of built-in speaker before playing music

    So I was wondering if there was any way to turn down the volume of the built in speaker prior to playing music/video. I imagine that if I'm REALLY quick and pause the action, I can turn it down, but I'd rather not have to race against time.
    The context for this, is the desire to show someone else video on the iPhone (say a National Geographic video podcast) without the audio blasting forth.
    Any ideas?

    So you're saying the phone doesn't remember the previous setting you had it at and jumps up or something...?
    ..or you want to hit play and have it not play so you can adjust the volume first...sorry can't help if that's the case. It kind of doesn't make sense from a UI perspective, when I press play or start a video I want it to play....different strokes for different folks tho

  • I cannot turn on the wifi for my 4g. The button is visible but non functional. suggestions?

    I cannot turn on the wifi for my 4G. The button is visible but non functional. Suggestions?

    Hello! Does the wifi button look greyed out? Here is a link regarding this issue: http://support.apple.com/kb/ts1559
    What you will need to do is to first to reset network settings by going to Settings>General>Reset>Reset Network Settings, NOTE: When you do this all bluetooth/wifi passwords will be forgotten. If the issue persists then we need to do a simple backup and restore.
    Follow http://support.apple.com/kb/ht1766 and http://support.apple.com/kb/ht1414 on how to backup and restore, when you restore please restore as new, do not restore the backup just yet if the Wifi is greyed out then there is a hardware issue and the device needs to be serviced. Please check your local Apple Store or call into Apple regarding service options and warranty status. Hope this helps!

  • How can I turn up the volume of the speakers?

    The volume is very low and I can barely hear the person calling. How can I turn up the volume? I can I reach the volume settings inside the skype app?

    IT'S A REAL PAIN WHEN YOU'RE TRYING TO TALK TO SOMEONE. 
    bOTH THE MIC AND SPEAKERS AREN'T REALLY UP TO IT.
    WHAT I DI WAS SORT THROUGH MY MOBILE PHONE LEADS AMD FOUND ONE THAT FIT THE KINDLE SOCKET AND HAD A MIC ON IT, TOO. 
    wORKS FINE NOW.
    hOPE THIS HELPS. XX

  • Can I turn up the volume more than maximum volume?

    I'm using iMac with no external speakers connected. I always want to turn up the volume more than the maximum volume but I don't know how to do. Is there any ways? Thanks.

    Ahh, think about it a moment. It's called "maximum" for a reason.
    If you want louder sound connect a set of powered external speakers.

  • Ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost.

  • How can I turn off the volume when I turning on my computer?

    Hi,
    how can I turn off the volume when my imac is turn on? later if i use it to listens music or whatever I can turn it on manually
    I don't want to sound that indicates the computer is on
    thanks
    adaltam

    Hello:
    Simply hit the mute key on your keyboard (found over the F10 key).
    Barry

  • Satellite L300 - I can't turn up the volume for a low battery

    Hello dear Toshiba users
    My english is not very well.
    I have a Toshiba notebook L300 Satellite
    My problem is that i can't turn up the volume for a low battery
    Is there any one who knows how i can resolve it?
    thanx
    mariete

    Hi
    I think you want to enable the sound notification when battery gets empty.
    Is it right?
    Well, you can do this in Vista Power settings
    I assume you are using the Vista OS and therefore this battery notification can be enabled in Vista Power settings.
    Please check this Toshiba doc.
    +How to handle power managment features of Windows Vista+
    http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
    There you can find the settings for battery. Its called Low battery level
    Check it.

  • HT4623 I cannot turn off the passcode which I do not want on my ipad.  I keep getting the message "ipad is disabled" I have tried to enter the passcode that I entered when I updated to iOs7 and cannt get to the settings page.  Can someone help me?

    I cannot turn off the asscode which I do not want on mhy ipad.  I keep getting a message "iPad is disabled".  Yesterday, I updated to iOS7 and was asked
    to enter a 4 digit passcode and now  I type in the 4 digits and the ipad will not accept it.  I want to get to the settings page.  Can someone help me?
    Thanks.

    hope you didn't have GREEK keyboard selected
    If you did APple do not want to know that their upgrade has trashed your ipad
    search on  ios 7  ipad  greek keyboard
    to see other sufferers - if you had a greek keyboard then you need to set it to english/french etc
    to do that you need to unlock your ipad
    to unlock your ipad you need to re-set your keyboard
    to do that you need a greek keboard
    to get your greek keyboard back you need to unlock your ipad
    and so on and son
    thank you apple

  • My Gigaworks S750 system distorts when i turn up the volume... Please Help Me

    My Gigaworks s750 has been stuffed from day . It's about a year old. How is it stuffed? turn up the volume and some speakers distort. Its not the speakers, i tested by swapping them around, so the amp in the sub is stuffed. Can i pay creative to fix this? any ideas on cost? If not can i take out the AMP and buy one and plug that into it to replace the broken one?
    Thanks!
    Regards, Mortagen

    You're right, it's over my head. I have no understanding of bitrates being sent too fast to the subwoofer, perhaps your brother can break it down into layman's terms for you and then you can enlighten us. With regards to Creative charging you $200 to fix it, it sounds like you've already sent the speakers to Creative. As I understand it from past experience and from what others have posted, Creative never quotes a repair charge until they have had an opportunity to diagnose the system to determine the level of repairs needed. That, of course, would also conflict with Creative's more current policy of not doing any out-of-warranty repairs at all, and not providing any support for any product that is out of warranty.
    The crackling that you're hearing is probably there at all levels, you may just need to turn it up to the 50% or above level for it to be noticable. If this is an issue that has just exhibited itself in the last 6 months or so, there is probably a loose or fatigued connection someplace. The most likely is probably one of the 3.5mm female jacks on the subwoofer, or a wire that may need to be replaced.
    andrewc289 wrote:
    I posted about the same issue. It is not normal distortion, most likely a bad amp. I am looking into how I can fix this myself also since creative wants over $200 to fix a product that broken because of their poor design.
    Check out the thread that involves repairing the sub, it may be a little over your head though.

  • When i make a call i can hardly hear the person on the other end ,how do i turn up the volume on the phone so i can hear them better pls help

    when i make a call the person on the other end is hard to hear ,how do i turn up the volume on the phone so i can hear them better pls help

    When on a call, press the round button with the + on the side of the phone until the volume is where you want it.

Maybe you are looking for

  • How to return jolt connection back to the joltpool?

    hi I used following codes to get joltconnection pool: SessionPool sessionPool = sessionPoolManager.getSessionPool(poolName);      DataSet request = new DataSet(requestString.length()*2);      request.setValue("STRING", requestString);      Result res

  • Which table contains the task related information in WMS

    Hi I have a requirement in which I need to have taskID, employee wms id.. Please help me know the main table which contains tasks related information in WMS. Thanks

  • Billed $24 for renewal. But I did not renew.

    Hi, 3months ago, I purchased an online phone number for $24. Fast forward 2months and 2x days, and I've just billed another $24 for the service. I did not authorise a subscription. Furthermore, My app clearly askes if I want to 'renew' the service. S

  • Any fix for non-booting back-up disks?

    I have 5 Lacie back-up disks, all firewire, and all based on clones of my iBook (on 10.4.6). Unfortunately, they've all followed the same pattern of decline - working perfectly for a year or so, then suddenly becoming unbootable. They appear as a boo

  • Task execution based on hierachy Level

    Hello Guys, I have a hierarchy with 2 Levels (L1 & L2; L2 is a subnode belonging to L1)  and I want to oblige the users to execute the consolidation monitor task only based on Level 1, what is the best solution into EC-CS? A validation, authorisation