I cannot update ipod to 4.3.3 get error 1604
It works ok transfering back and forth to tunes but it says I have to restore to update, but when I do that it come s up with 1604 error and I cannot access my Ipod. Any help please.
Lensturn
From Apple's article cited at the end of my post:
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and re-open iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS1275
Similar Messages
-
Cannot update ipod 4 as i always get an error message saying timed out
i cant update my ipod as i keep getting an error message saying timed out
Did you check your security software settings? iTunes has to be able to contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues
-
Cannot update ipod software from version 1.0.2 to 1.0.3
I cannot update ipod software from version 1.0.2 to 1.0.3. The message says, "The ipod cannot be updated because it contains files that are in use by another application." It's an ipod nano 7th generation. My Mac OS X is version 10.6.8. What should I do?
Temporarily disable ALL of your anitvirus/antispyware software or in your AV software turn off iPod scanning.
-
Will itunes latest version install on X 10.4.11? Cannot update ipod touch OS (2nd & 3rd Gen) Get error trying to update ipod touch - "Update itunes to latest version" In itunes, select update and receive msg "itunes is up to date" Ver 9.2
The lateset upadstes require Itunes 10.1+ which require Mac OS 10.5.8+
-
Cannot update ipod-unknown error occured(-50)
I downloaded a movie to my ipod using nero 7.0 without difficulty,accidently deleted it and now when I try to redo I get "cannot update ipod,unknown error occured (-50), disk could not be read or written to. It won't even let me reload the ipod. still shows error. P.S. I've tried the 5 R's
This is the only thing I can find on apples actual website about an error (-50)
http://docs.info.apple.com/article.html?artnum=93447
But im not sure if that applies to your problem, you can check it out though.
Have you gotten any of your songs from limewire? I've seen some posts on another website about this error maybe having something to do with songs from limewire.
Macbook Mac OS X (10.4.7) iPod Video 5th Gen (30Gb), iPod w/Color Display -
Cannot update Safari to 6.0.2 (NSURLErrorDomain error-3001.)(102),any help welcome.
There are problems with the server. Download Safari 6.0.2 and install > http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg
-
Cannot update or purchase apps after ios7, get message "could not be purchased at this time. please try again later."
I have the exact same issue , with no answers or help available !
-
hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....please any help
https://discussions.apple.com/message/23100453#23100453
more hits from the search
https://www.google.dk/search?q=restore+itphone+error+16&oq=restore+itphone+error +16&aqs=chrome..69i57j0l5.11485j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8 -
CANNOT UPDATE WINDOWS 8.1 PREVIEW, ONLY GET TO 15% BEFORE SYSTEMS RESTARTS
CANNOT UPDATE WINDOWS 8.1 PREVIEW, ONLY GET TO 15% BEFORE SYSTEMS RESTARTS
This is ridiculous, I TRY to update my 8.1 preview and I can only get about 15% through before the two hour limit and the system restarts and I have to start ALL OVER AGAIN.
I LOVE how MICROSOFT is not supplying a solution or giving us the option of a getting a CD or other offline update.Support for Windows 8.1 Preview ended on January 14, 2014. It's time to replace it with the final, released version.
Windows 8.1 Preview Support Comes to an End
Update from Windows 8.1 Preview to Windows 8.1
Carey Frisch -
While updating ipod to ios5 it shows an error after downloading the update
while updating ipod to ios5 it shows an error after downloading the update
Are there any error details like numbers for example?
Did you follow this article about installing iOS5? iOS 5: Updating your device to iOS 5
Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues -
i bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.
The message is correct. You can only register a product once... there is no need to register again after you do it the first time. You can re-install and activate with the serial number, but there is no need to re-register.
-
while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?
- What was the error message?
- Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod. If the iPod shows in iTunes then you can try again. However, You should try to resolve the error message first.
- If iTunes does not see the iPod try reetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes. -
Pioneer car cd player wont connect with my ipod. I continue to get "error 19"
Pioneer car cd player won't connect with my ipod. I continue to get "error 19". I've tried everything in the book and I can't get either my ipod touch(2nd gen) or my iphone 4 (both with the latest updates) to work. Pioneer unit model # is DEH-P8300UB
The iPod is designed to work with iTunes, you can't load songs onto it without either iTunes or some other iPod manager which you would still need to download. Without software on your computer to manage your iPod then it's pretty much useless, explain to your grandparents that the iPod will not work without iTunes. If you need to explain to them what's required then let them have a look at this page: iPod nano Fast Start: The New User's Guide to iPod nano
-
I cannot burn playlist itunes i keep on getting error message 2131 help please
i cannot burn playlist from itunes i keep getting error message 2131
Are your optical drivers up to date? Try updating the drivers, if that was the case in the Device Manager. Hope it works.
-
I cannot install or uninstall itunes. I get error message 2324?????
You might need to run the Windows installer cleanup utility....start the troubleshooter for assistance at the following link: http://support.microsoft.com/kb/2438651/
Maybe you are looking for
-
How can I replace navigation buttons with obvious ones?
Here's the web page: http://josephskibell.com/. I've just taken over this website for a friend and opened it in Dreamweaver but the code is such that the existing four little square navigation buttons at the top of the page don't show up in design v
-
HOW TO HIDE FIELDS IN A CUSTOM TABLE
Hi all, I've a requirement where there's a maintainence view attached to a custom created table. Whenever I add new entries via View, on saving the record, 2 of its fields only should appear. For example, if my table looks like this, SAP ID OBJE
-
The roll over feature doesn't work for customizing, is there a way I can fix this
I always have to change my browsers theme to see what it looks like, instead of just roll over. Is there a way to fix this?
-
UNLOADING EXTERNAL SWF. SOMEONE HELP!
I have a menu in my site and i recently added a comment form that is loaded when you click one of the buttons of the menu. My problem is that when I click on a different menu button the external swf [comment form] its still there I've tried adding th
-
Conversion Request from Labview 3.0x to Labview 8.2 - Attachments: 3 of x
I have a LV3.0 application that reads a rack-mounted SCXI system that monitors analog quantities for a 1985 HVDC converter station. I would like to decommission the 1980's vintage Macintosh PC, running Labview 3, and move to a more maintainable Wind