I cannot update to New version of iPhoto. Still have older version despite uninstalling application and redownloading it? any suggestions. My current version is the 2012 version, but it is not updating to the new version
I updated to OS X Mavericks. I updated all of the new iLife applications. iPhoto is not updating to new version. I have iPhoto '11.
The icon on the dashboard has the new logo, however when I open the application it hasn't updated. I tried deleting the application and redownloading it. Still stuck with old version
I have exactly the same problem as carson.
iPhoto tells me that I have Version 9.5, and the info-page tells me "iPhoto 11, Version 9.5 (902.7)", and the logo is the new one.
However, the programme is exactly the same as the old version - not just similar, exactly the same! The screenshots on the apple-website show a dark grey, almost black interface, for example (like the new iMovie). However, my version still shows the old light grey.
I deleted the iphoto-app entirely (and was horrified to lose all my photos), but that also didn't work out.
Similar Messages
-
After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone please help? I am not an advanced user and I would like my photos back, having had no idea I would lose iPhoto in the upgrade!
Thanks petermac87...but for some reason, the only purchases showing are OS. So assuming iPhoto is in Mountain Lion, I was hoping to look under Hidden Items there as you suggested, but there is no option for that. Only option is to download Mountain Lion again, not iPhoto specifically. Any ideas welcome!
-
Hi. I brought a new iphone 5 and I wanted to restore it to one of my previous iclouds but it's not letting me - the icloud backup is a iphone 5 6.1 ios and my current is iphone 6.0.1 ios - please advise what i should do...
Hi ldyazch,
You will need to set it up as a new phone, not from a backup, first. Then, after setup is complete, go to Settings > General > Software Update. Make sure you are connected to Wi-Fi and have at least 50% battery power. After then update downloads and installs, you can go to Settings > General > Reset > Erase All Content and Settings.
This will let you go through the setup again, and this time you can choose your backup. -
I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working fine.
Have you tried the following troubleshooting document?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
If you end up using the If the iTunes Store opens successfully section of the document, and the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK. -
Help. I downloaded the OS lion. Then I imported some photos with the "iPhoto". But I see only the photos in the "last import" but I can not see in the library or photos of events, although they are marked as a number.
bioetico wrote:
I understand the problem, why is the date before which the photos.
LN -
Hi,
I Published a report on the report server but it's not showing in the internal application we use to access reports. The name of the application we use is called MAMA and this application has access to all the reports on the SQL report server. My email is
[email protected] my cell phone number is 201-888-7952.
Thanks.Hi Roger,
Based on my understanding, you publish a report on the report server. When you access reports with internal application, the report doesn’t display, right?
In your scenario, since you mentioned you have published the report to report server, please go to report manager, check if you can see the published report and open the report properly. If the published report is displayed on report manager, it should not
be the issue in Reporting Services. In this scenario, since the MAMA application has established connection with on report server, it may not update items on report server after you publish your report onto report server. So please try to “refresh” in MAMA
or reconnect the report server. If issue persists, I suggest you contact the MAMA application vendor to get some more effective advices.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu -
I have an Apple using Mac OS X10.5.8 and just purchased a Canon MX726 printer to use with my computer but I get a message saying the software is not supported. My computer skills are fairly modest; is an attempt to make this printer work with this computer doomed?
10.8 if you must, but on the link above...
Canon PIXMA MX726 drivers for OS X 10.6/10.7/10.8/10.9
MX720 series Scanner Driver Ver. 19.1.0 OS X 10.6/10.7/10.8/10.9
26.75 MB
Download
ICA Driver Ver. 3.1.0 (OS X 10.6/10.7/10.8/10.9)
3.44 MB
Download
Quick Menu Ver. 2.2.0
2.31 MB
Download
Canon IJ Network Tool Ver. 4.2.0 for Intel Mac (OS X 10.5/10.6/10.7/10.8/10.9)
4.38 MB
Download
My Image Garden Ver. 2.0.1
290.88 MB
Download
Easy-PhotoPrint EX Ver. 4.5.0 (OS X 10.7/10.8/10.9)
102.19 MB
Download
MX720 series CUPS Printer Driver Ver. 10.84.1.0 (OS X 10.7/10.8/10.9)
13.76 MB
Download
Speed Dial Utility Ver. 1.3.0 (OS X 10.6/10.7/10.8/10.9) -
this issue happens with all additional safari windows except the primary one opened. I think it is a small software glitch, but id like apple to know so they can update it.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
The backup works, but it's not updating afterwards?
I am trying to update my iphone 4 and am about to throw it out of the window... In itunes, it tells me that in order to update from ios 4.2.9. to ios 7.0.3. I need to back up my phone first and then update. It takes the hour or whatever to back up, and then tells me it's all done and I'm safe to disconnect my phone from my PC. But it NEVER starts the actual update! What is going on? Is there something I am missing or is this Apple's way of getting me to turn this phone in for the new 5S or whatever? ..Seriously thinking of trashing this thing and going out tomorrow for the Samsung Galaxy, LOL. Please help!
Are you trying to update over the air or through iTunes?
-
Nothing appears on my Desktop. The Finder seems to work, so I can place a file into the DTop folder, but nothing appears on the DTop, not even the HarDrive.
You can temporarily hide the crap on your desktop. Edit the CreateDesktop key in com.apple.finder:
defaults write com.apple.finder CreateDesktop -bool false && killall Finder
Then, to get my clutter back:
defaults write com.apple.finder CreateDesktop -bool true && killall Finder -
OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
Looks like the simple part is using it - just press and hold the digit to dial the whole number.
So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)Seemed like there should be a speed dial, so I did a search & found the cure is worse than the disease -
Dial from your phone
Make calls directly from your existing touch-tone home phone:
Local calls: Dial the 7- or 10-digit phone number.
Long distance calls: Dial 1 + area code + 7-digit phone number.
International calls: Dial 011 + country code + 7-digit phone number.
Dial online from your myAT&T account
Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
Log in to myAT&T. Don't have a myAT&T login? Register today!
From the I want to menu, select Manage my plans and services and then Manage my phone features.
Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
Enter a number to dial or select a number from your Call History or Address Book.
Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
Select Place Call.
When your home phone rings, pick it up to place your call.
Important Note
To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
Dial from your U-verse TV
With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
Tune to Channel 9900 using your U-verse TV remote.
Select a U-verse Voice phone number on screen.
Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
Scroll using the arrows.
Select a number and press OK to return a call.
Select Call and press OK.
When your home phone rings, pick it up to place your call.
You can have a call list accesed from a browser.
You can call back a historical call from the browser or TV.
https://www.att.com/esupport/article.jsp?sid=KB401002 -
Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values
Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank youMy programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi -
When you purchase songs, I have several artists that do not appear in the artist column. The songs appear in the song column, but they are not grouped in the artist column. What gives?
Make sure these tracks are not marked as part of a compilation in iTunes from under the Info tab of the Get Info window that can be accessed by right->clicking on a track.
B-rock -
I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns. How do I decrease the height of the column. Have tried to use the cursor and drag down the top border, but that does not reset/decrease the top border.
Set your columns back to one for the moment. In layout mode, insert a Text box. Place it in the upper left corner of your document, and drag down and right to the size of the container for your two columns. Click inside the Text Box, and now bump up your columns to 2. Your two columns are now contained in this resizable Text Box.
-
you can't open photo library using this version of iphoto. you have made changes to your photo library using a newer version of iphoto. please quit and use latest version of iphoto. iphoto 11 is installed.
This is a message you got?
If so, as your post isn't clear, it may be a bogus message caused by a corrupt database.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
Maybe you are looking for
-
Unable to Import from my Canon DC220 camcorder...
I had begun a project with I-movie 6 of which my camcorder was not compatible with...my solution was to upgrade to I-Movie 08 of which the Canon DC220 is compatible with and I-Movie should import from (http://docs.info.apple.com/article.html?artnum=3
-
Problem in Mail 4.2 after upgrade from Tiger to Snow Leopard
After the OS upgrade and software updates I realize that both my gmail and my hotmail accounts are not accessible from Mail 4.2. Furthermore, whenever I open Mail 4.2 there is not any windows pop up. And there is no option to add a mail account. This
-
Hi friends, Kindly explain some body how to clear f-03 bank sub accounts When we cleared the outgoing payment f-58 entry must be Vedor A/C Dr Bank outgoning A/C After posted the document the check information is available at environment level When w
-
Q57: AP Invoice and payment reconciliation
Dear All, Which table(s) can I use to see whether an AP Invoice has actually been paid. I can get AP Invoice information from OPCH & PCH1 but hwere do I get the reconciliation from? Thanks, Robin
-
Within Downloads (OS X Mavericks) I have lost the ability to click and drag an item to Trash
I can move the files to Trash in Finder, but I used to be able to do that in the Downloads list. Now, in the Downloads list if I click on a file, it launches only. I cannot drag it to Trash. This occurred since installing Mavericks...I think. Does an