I cannot use FCP X because as soon as I launch it it stops responding. I can see the interface and a continuous beach ball.
I cannot use FCP X because as soon as I launch it it stops responding. I can see the interface and a continuous beach ball. Its been more than 3 months now since I have been using FCP X and it has never done this before. The problem is that I have some projects to finish and I do not know what to do. How can I solve this problem?
As mishmumken said, you can try deleting your preference files . . .
If that fails, you probably have corrupt or incompatible media somewhere. Use finder to create new (temporary) folders and move your projects and events there before launching the application so that the events and projects are not found.
If FCP X loads OK, bring back the events one by one, relaunching FCP X each time, to try to isolate the offending material.
Andy
Similar Messages
-
HOw do i restore lastest backup from itunes?
I'm in the same situation as a lot of people. Whenever my iPhone 4 updates, it locks into sync mode and then I continuously lose my important data (contacts & photos etc) and recent backups replace more important backups, without asking for permission to do so.
As this has happened before, I make regular backups. Yesterday it showed one of these recent backups, but this has been replaced with todays, which is a new installation.
Is this the same with the new iPhones? Are Apple trying to encourage people to over to new iPhone, with more compatible software?
I really need help with this, as it keeps happening and I spend a lot of valuable time trying to rectify it. -
Hi, I need to activate my Adobe CS3 on a new computer because my old one died and I'm having difficulty. Tried the normal registration way and then logged in with my Adobe ID and can see the software and activation code already registered. How to get it on my computer registered?
If your two activation are in use you need to call Adobe. Install CS3 to to point of activation and call Adobe at that point. They have help me in cases like your My Disk crashed and I replaced it. Could not deactivate the crash activation. I done that twice over the years I've been using PS for around 20 years
To see your key you need to click on the product in your Adobe products and services page. -
Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
When I use Garageband the window is so large that I can't reach the bottom corner to decrease the window to fit inside the display so that I can see the top and bottom of the window at the same time.
Any suggestions?You can reduce the window by grabbing any edge or corner. You don't have to use the bottom right anymore.
You could also temporarily move the dock to the left/right so you can reach the bottom. -
Hello,
I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event with the event title, the number of pictures and the pictures itselve as small thumbnails. BUt ounce I want to open the event to see the pictures in full screen the event title annouces 0 pictures and no pictures are visble anymore to mee. I have checked if the pictures are marked as hidden and this is not the case. What's going wrong. All the other events are visible in a normal way.
The albums with the same pictures into them are visible.
Thanks for your help,
RafMake a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #1, #2 and #6.
Click to view image full size
OT -
When opening my email from my company that uses Microsoft office to create my class requests in mail app it always is missing the check boxes for which class I need to fill. But when I open it in the pc site or in safari it does open correctly. But still will not download or save correctly in pages,docstogo,or in SMEI
I Would start with basic troubleshooting steps. Clear Safari, Completely close Safari, and reset your iPad.
Go to Settings>Safari>Clear History and Website Data
Now close Safari. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Hi,
Please help me with this as the phone is currently lying as a dead paperwieght with my brother in law. The phone, even though bought as SIM FREE, keeps asking for ACTIVATION!!!
Does it mean that I need to activate it with a SIM of one of the carriers that offers a contract and then I am free to use it with any SIM anywhere in the world?
Please assist in as much detail as you can.
Thanks.Hi FelipeV,
Thanks, tried that.. half their numbers keep going busy and when they do pick up they are unable to assist.
I called up APPLE in UK as well, no help there either..
but.. I say.. its a SIM FREE phone for crying out loud, what is this ACTIVATION nonsense??
Thanks for the suggestion anyways. -
Connected Operations Manager - VMM, can see the server and status - cannot see Summary Data
I was able to connect OpMgr SP 1 and System Center R2 VMManager. I was able to discover my servers and SQL Servers. I am getting the Red X in the Database Summary on the OpMgr Dashboards (Free Space and Performance), I am able to see the Databases.
The error message is below, I have tried 5 things from the internet with no solution yet. Before I make a big mistake, I would like a second opinion. This is my first time installing OprManager. Thanks
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderException: An error occurred
executing the command: [Microsoft.EnterpriseManagement.Presentation.DataProviders.Library!PerformanceDataProvider/ResolvePerformanceCounterSeries] in provider: [Microsoft.EnterpriseManagement.Presentation.DataProviders.PerformanceDataProvider, Microsoft.EnterpriseManagement.Presentation.DataProviders.Library,
Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35].Unable to execute stored procedure needed for dashboard. If you just installed Operations Manager Reporting Server, please wait a while and try again. This can also occur if the Operations
Manager Reporting Server SQL Server is not started or inaccessible. ---> Microsoft.EnterpriseManagement.Presentation.DataProviders.DataWarehouseException: Unable to execute stored procedure needed for dashboard. If you just installed Operations Manager
Reporting Server, please wait a while and try again. This can also occur if the Operations Manager Reporting Server SQL Server is not started or inaccessible. ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: Could not find stored procedure
'SDK.Microsoft_SystemCenter_Visualization_Library_PerformanceCounterListByManagedEntityUsingContainerME'.at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)at Microsoft.EnterpriseManagement.Common.Internal.MonitoringDataWarehouseServiceProxy.GetDataWarehouseStoredProcedureResult(String
SpName, StoredProcedureParameterCollection param, IEnumerable`1 columnFilter, Int32 timeout)at Microsoft.EnterpriseManagement.Warehouse.DataWarehouse.GetDataWarehouseData(String storedProcedureName, StoredProcedureParameterCollection param, IEnumerable`1 columnFilter,
Int32 timeout)at Microsoft.EnterpriseManagement.Monitoring.PerformanceDataReader.GetPerformanceCountersByObjectCounterInstanceManagedEntity(ManagementGroup connection, String perfObjectName, String perfCounterName, String perfCounterInstanceName, Guid[] managedEntityIds,
Boolean getDistinctPerfCounters)at Microsoft.EnterpriseManagement.Presentation.DataProviders.PerformanceDataProvider.GetPerformanceCountersByObjectCounterInstanceManagedEntity(String perfObjectName, String perfCounterName, String perfCounterInstanceName, Guid[]
managedEntityIds, Boolean getDistinctPerfCounters)--- End of inner exception stack trace ---at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway
gateWay, DataCommand command)--- End of inner exception stack trace ---at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand
command)at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)Hi,
Please remove and re-add the profile targeting the report part.
In addition, you may check the similar thread as below:
SCOM12 deploy 2nd server, data reader account different
https://social.technet.microsoft.com/forums/systemcenter/en-US/09430f25-4884-4e04-86f6-5127548f20fb/scom12-deploy-2nd-server-data-reader-account-different
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.
-
Hi i have avi files saved in iphoto that i used to be able to play through quicktime. However in the last few weeks i cannot play many of these files. I can see the videos and click on them but nothing happens (i have version 7.6.9 of quicktime). Does anyone know why this has happened and what i can do about this?
Thanks.What do you mean by what audio/video formats are involved? These are all files from several digital cameras.
As previously stated, AVI is a file container. It is somewhat old and its originator, Microsoft, dropped official support of it over a decade ago. However, it remains popular with PC users since almost any valid audio and/or video compression format can be stuffed to the file which synchronizes the content by interleaving the individual audio and video frames. The compression format is the specific manner in which the audio and video data are encoded as it is placed in the AVI container. You can find the compression format by inspecting the file in the Finder "Info" window, or in the "Inspector" window of the QT player (or other media player) if the file can be opened.
For instance, one popular compression combination would be to place DivX encoded video and MP3 audio in an AVI file container. However, neither DivX nor MP3 is natively supported by the QT player. (Although iTunes will natively support the MP3 audio.) Therefore, people who wish to play such files in the QT 7 Player would normally install either the DivX component or Perian but not both. Either installation will independently play such files in the QT Player, but if both are installed, the file will usually stop working since these two codecs can create a playback conflict.
However, the AVI container could just as easily contain DV along with DV audio. In this case, the file should play correctly in QT since this compression format is natively supported by the basic component configuration that comes in every current OS installation. Therefore, if such files suddenly stopped playing, this could be an indication that a component has been moved or deleted or that your system or QT embedded structure has become corrupted. -
I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all helpThe supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource. -
Hello anyone
I get a message when i plug in my ipod touch saying "cannot use this ipod because apple mobile service is not started" can anyone please help me with this problem...I had this message once before but I forgot how to correct itFrom the More Like This section on the right:
I get error message when I plug in iPhone 4s saying "This iPhone cannot be used because the Apple Mobile Device service is not started"
can't get my ipod to connect to tunes error message "cannot be used because the apple mobile device service is not started" fixes? Using Win XP
im trying to connect my ipod to itunes and its saying it cannot connect because the "Apple Mobile Device is not started" help
Or see: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?
Have you tried a reset To see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?
apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.
Maybe you are looking for
-
Creation of push buttons in report program
hi guys, I have rquirement like in selection screen i need one paramenter like vbeln and i need two push buttons ? can we create pushbuttons in selection screen? if possible can anyone please help me on these? thank you
-
Cd not mounting for mac version of nwn
I purchased the mac version of Neverwinter nights and attempted to install it on my 10.4 macbook. If i put in the disc1 it will just spin up and down, but will not mount. This continues for several minutes before eventually spitting it out. If I put
-
Have 1142 LAP AP's installed in each floor, All AP in One specific Floor are rebooting. After reboot most AP are joining WLC but few are unable to Join WLC. Logs in WLC shows AP has Crashed due to "Unexpected exception to CPUvector 2000, PC = 0x49D
-
Failed to send the mail message error code: -49
Hi, When sending mail outside the company (outside the domain), getting this error: Failed to send the mail message error code: -49 When sending mail internally (within the domain) successfully submitted. I was looking for notes relating to the subje
-
Ipad isn't recognized in windows 7
My ipad isn't being reconized when i plug it in on either of my computers. I'v tryed trobleshooting it but that doesn't work. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!