I cannot use my data

I have a blackberry data package with verizon I bought a used storm 9530 from a friend and after tech support had me wipe my phone it says email is set up for enterprise server use and the phone has never been associated with a business it wont load up the browser, app world, let me send pic messages, or even let me set up my email for BIS how can this be fixed tech support at verizon doesnt know

Hi and Welcome to the Community!
After painfully trying to parse your post (some punctuation would help), I am not certain that I understand your situation. ALL BB's will display, in the email configuration wizard, "Enterprise", all the time...that's always a built-in item, even if the BB is not or has never been associated with BES. But, if "Personal" email does not display, then indeed VZW is not properly delivering to you BIS-level services...if they were, then you'd see both Enterprise and Personal as available selections.
But, your post further confuses me...
RandyH wrote:
it says email is set up for enterprise server use
Given what I said above, is this still an issue? For example, if one knows how to properly look, they can perhaps determine if the BB was ever associated with BES...and if it was, and was not properly cleansed afterwards (a mere "wipe" will not do so, btw), then there could be a latent IT Policy on board that is preventing some services from functioning.
But, again, from your words, I cannot be sure of your exact situation.
Until VZW can properly register your BB onto their network and deliver BIS services to you, pretty much nothing will work. If they don't know how to do that, then you need to escalate with them to someone who does know how. And I am 100% certain that someone at VZW knows how...perhaps not the person you spoke to, but agents receive different levels of training, and some know more than others...just an artifact of the human condition, I think.
In any event, what you need to do is get VZW to verify that they indeed can properly create a BIS account in their system for your specific BB. If they cannot, then they should be able to tell you why (e.g., reported lost or stolen, registered to a different carrier, etc.).
Further, have you validated that the BB is unlocked from it's original carrier (if it was not VZW)? See this for reference:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
Oh, and since this is a used BB, you and your friend need to review and be sure that each has properly completed their sections of this KB:
KB05099 Steps to take before selling or after buying a previously owned BlackBerry smartphone
If your friend did not fully complete all of the Seller steps, then your attempting anything is further moot.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I cannot use "InfoBus Data Form wizard"

    I can't use "InfoBus Data Form wizard", because it doesn not apper in anywhare of my JDeveloper 3.1, on Win NT 4.0/SP5.
    Any help will be much appreciated.

    Nadeem Siddique (guest) wrote:
    : Hi,
    : I was trying to create a single table data form using
    (JBuilder2
    : )infobus data form wizard and during the step 3 (select
    database
    : objects)i got following error:
    : >>
    : ORA-03115 Unsupported network data taype or representation
    : java.sql.SQLException
    : <<
    : I was connected to Oracle 8.0.5 database runing on AlphaVMS!
    : What I am doing wrong ?
    : Thanks
    : Nadeem
    I have tried all the JDBC /JDBC OCI drivers ! and geting the
    same error as mentioned above!
    null

  • Easy DMS cannot use additional data while creating a document

    Hello,
    We have installed sap easy dms 7.0
    We have a problem while creating a new document with SAP Easy DMS.
    On the DIR tab the additional data cannot be used.
    Do I have to change a registry setting?
    We already have defined classes and their features and values in CL02 en CT04
    please help
    Geert ter Harmsel

    Hi,
    Additional functions for object links active Indicator controls the activation of additional functions for the links of objects to this document type.
    You can activate the following additional functions for an object to document link:
    1) Valuation
    Additonally, you can link another object to a chosen database table (See example Additional Object).
    You can delete the additional information of an object link.
    2) Classification
    You can classify the link. You must create a class (class type 048 - object link) with the characteristics that you want to specicify for the link (For example, responsibility, organaization).
    When you set the indicator these functions are active during processing of the document info recod, register object link.
    Hope this is what you are looking for.
    Regards,
    Deepak Kori

  • Iphone 4 cannot use cellular data anymore after 4.2 update

    I have an iPhone 4 and I have recently updated it to the latest o.s. after updating I can no longer use the internet without wifi and I cannot send/recieve picture messages (have tried to send and recieve with multiple carriers) and my phone sometimes does not recieve calls or regular txt messages. Please help.

    It's weird, I'm having the same problem. Once I deactivate WiFi my iPhone 4 doesn't get 3G anymore, I have to reboot in order to get data back.
    This is also after updating to 4.2.

  • Using Simulink data in labview

    Hello everyone !
    I have made an algorithm in labview and the simulink model data needs to be manipulated in this algorithm. The output of this algorithm is to be fed back in simulink model. I am able to map labview front panel controls with simulink model but i cannot use its data in block diagram window. How do i do it ?

    Here you have three options:
    1. Create a DLL from your model and use the Model Interface Toolkit (http://sine.ni.com/nips/cds/view/p/lang/en/nid/211815) to load the model into LabVIEW;
    2. Convert your model into a LabVIEW Control Design and Simulation (http://www.ni.com/white-paper/11281/en/) SubSystem and use the Control and Simulation Loop to run the model;
    3. Use some sort of communication between LabVIEW and Simulink (like OPC server) to communicate between simulations. This last option, although possible, it requires some sort of synchronization between products to avoid the loop to run too fast.
    Hopefully this helps,
    Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

  • I cannot use data back up when I use iphone4s in iphone5 ,please help me?

    I cannot use data back up when I use iphone4s in iphone5 ,please help me?now a day I use iphone5 and ipad4 I love apple

    I back up in iCloud when I used iPhone 4S,but now I want use data iCloud in iphone5 but I cannot do it,please help me?what should Ido ?

  • My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

    My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

    It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe.  Do not attempt to use the phone, but take it to Apple for evaluation.

  • I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I cannot use data and voice at the same time.

    I cannot use data and voice at the same time.
    I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
    This is a very basic issue, am I missing something? Please help.
    My Model is lumia 820 with the latest portico update.
    TIA
    Sandeep

    I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

  • HT5925 I am trying to send data from my computer to my ipad, how do i do this if icloud says I cannot use it as I have multiple versions of outlook

    I am trying to send data from my computer to my ipad, how do i do this if icloud says I cannot use it as I have multiple versions of outlook

    Have you had more than one version of Outlook?

  • HT5815 The most important piece of info about an update I need is how much data does it require. I am travelling and using prepaid data. I cannot even consider an update until I know how much data it will use. Please provide this information.

    The most important piece of info about an update I need is how much data does it require. I am travelling and using prepaid data. I cannot even consider an update until I know how much data it will use. Please provide this information.

    http://www.apple.com/feedback/macosx.html

  • I cannot use my Now Up-to-Date

    Yesterday I stupidly upgraded to Maverick 10.9 from OSX Mountain Lion! I ran Now Up-to-Date & Contact on Mountain Lion with no problem, but now that I have upgraded my system, I cannot use my Contact software. I work from home and this is a nightmare. Apparently I cannot go back to Mountain Lion now that I have upgraded - has anybody any clue as to how I can run my software again?
    I was advised to buy Mountain Lion but was told by Apple that it doesn't come as a replacement pen disc?!
    Help please ........ I do have an external back up system.

    I feel your pain!
    I have been a loyal Now Software person for over 10 years, but I knew this day would come since the last time I updated my software the quick contact menu bar became inactive....so I knew it was just a matter of time. I now bought a new computer and I can no longer use it- but I am lucky because I still have my old computer to reference... About a year ago I did an intense search for software that was comparable. I read a bunch of articles on the topic and I tried many of them that had a 30-day free trial, all ending in being losers to me. I did however, find one that sounded good and after much research, as well as several calls to their sales and emails to customer service, I took the plunge and made a purchase. They have a trial version,  you can navigate through it, but cant really use it as your won until you pay for it. I am happy to say- almost a year later I am sooo happy with it! I started using the calendar part first, but still used Now for my contacts primarily since it had all my notes which don’t transfer- and I have been meaning to dedicate a week or two to take care of that, but with over a 1000 contacts- I was procrastinating putting in the hours. Now I have no option but to do so immediately!
    The parallel suggestion sounds genius as a temporary option, but I cannot recommend enough this software by Market Circle called Daylight!
    (https://www.marketcircle.com/daylite/)
    Its layout is intuitive and being a mac person for almost 20 years now, that is really important to me.
    Their customer service is excellent! The best way to get in touch with them is through email and they usually answer within 24 hours. Their website has a bunch of tutorials that are very helpful. My tech person who I am in contact with from time to time just wrote me an email last week checking in and making sure everything was going well with me- something I have never seen in any software company! They are base in Canada.
    One of the things that I liked about this company's software is that they also have an app for my iPhone and so for the first time I don’t have to say to people that I will have to wait to schedule a meeting when I get back to my office to use my computer! I update my calendar on my phone and then sync the two with wifi when Im near my computer.
    The software is set up for a large company to use- which was a bit overwhelming for me at first since I am a one man show- so to speak... so parts of the software are a bit overkill for me- but that is ok- I can choose to use or not use those parts! Better too much than too little.
    Anyway, Good luck with everything and I hoped what I am saying is helpful!
    www.marketcircle.com/daylite

  • HT4389 no cellular data tab . cannot use internet airtel gsm , iphone 4 factory unlocked

    no cellular data tab . cannot use internet airtel gsm , iphone 4 factory unlocked plz tell me how to set the apn settings

    There is no need to manually set the APN settings for Airtel. The settings are already in the phone since they are a supported carrier. if it's not working, contact Aritel.
    Where did you get the phone? If it was hacked to illegally unlock it or jailbroken, that might explain why it does not work.

  • HT201299 Apps in Green in 'use cellular data for..' cannot be turned off?

    Why does an app in 'use cellular data for..' keeps on going to Green eventhough I already swiped it off? It keeps coming back.

    First thing and easiest thing to try is a device reset:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • I cannot find all my installed apps on the "use cellular data for" tab on the settings menu.

    I have a new iphone 5s and on the first day I've received it, I updated to IOS 8.0.2.
    Today, I've decided to turn my cellular data on and, in order to consume less data, I thought I would disable some of the apps. However, only a few were available/visible on the "use cellular data for" tab. However, when, with the cellular data turned on, I opened a missing app on the phone, it would start to appear on the list (where it wasn't previously). Also, when I go to the app on the settings menu, it would not have shown the option, "use cellular data" before I've opened the app and now it does. Do I need to turn on every single app before I can select my cellular data preferences? I know people with the same phone and their apps appear all, as expected.
    I don't know if this is a problem of my own carrier but I don't think so, because the people I mentioned earlier have the same carrier.
    Any help would be appreciated.
    Thank you.

    Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
    If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

Maybe you are looking for