I Cannot use my digital camera solution disk on windows 8.1

I Cannot use my digital camera solution disk on windows 8.1

Hi Bpboyink!
So that the Community can help you better, we will need to know exactly what model camera you're using.  Any other details you'd like to give will only help the Community better understand your issue.
Thanks and have a great day!

Similar Messages

  • Digital camera solution disk will not install on MS Vista

    Initial installation on gift machine with MS Vista was fine. Months after a reinstall the Digital camera solution disk 28.2 for Canon A340 will not install on mchine, but installed fine on a Win 7 machine. The installation goes up until it starts installing then an error message (no code) just states it cannot install.

    "I will try to make a disk on his."
    I doubt this will work either.  MS has diffintely screwed uo Win 8 especially if you don't want a MS account.
    Do you know how to use Computer Management?  This is going to be purposely vague because if you don't you really shouldn't do this.
    Go into Computer Management, right click on Administator and click General.
    Uncheck the Account is disabled box. It is also a good idea to set a password for the Administrator account since it has total unrestricted access to the system. Now you can log off your current account and you’ll see the Administrator account show up in the list of users.
    EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
    Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

  • Power Shot SX260HS Digital Camera Solution Disk will not install on my computer.

    Following the on screen instructions, after verifying the device, the software begins to install then a pop up screen comes on that says "a program needs my permission to continue" and after I click "continue" the software stops installing and a pop up screen comes up that says "unkown install errror"  and it will not continue to install.  It seems that the first pop up interferes with the installation but I do not know how to override that.  Please help.  Thank you

    Hi espring453,
    The window that pops up asking for permission is called the User Account Control.  If it is interfering with the installation, it will need to be fixed or disabled.  Microsoft can help you with this, but you will need to contact them directly.  They also have an article on their website about turning this feature on and off.  Please refer to the link below:
    http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Do I need to delete an older version of Digital Camera Solution Disk before installing a new one?

    I recently purchased an SX280.  I have an earlier version of the support software on my computer.  Will the new over-write the old or should I delete the old version first?

    Delete the first version first..its safer that way and less risk of a corrupted installation. I think it will install either way though but better safe than sorry.

  • Why i cannot update the digital camera RAW COMPATIBILITY UPDTE 5.0.4 AND ALWAYS ASK TO UPDATE IT WITHOUT UPDATING

    why i cannot update the digital camera RAW COMPATIBILITY UPDATE IN MY macbook pro with retina display and always ask me to update it without success

    toniak61 wrote:
    why i cannot update the digital camera RAW COMPATIBILITY UPDATE IN MY macbook pro with retina display and always ask me to update it without success
    Because something is wrong.  Most likely, either:
    (1) your Mac OS X Startup disk is damaged and you need to repair or reinstall OS X,
         - or -
    (2) you are not following the correct update workflow and should use the help from this Apple article. 
    For instance, if you are trying to update via  > Software Update..., restart Mac and download and install the Download Center version: Digital Camera RAW Compatibility Update 5.04.

  • HT1941 why i cannot use my web cam using yahoo messenger and face time?

    whi i cannot use my web cam using yahoo messenger and face time?

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Using my digital camera as a webcam

    Hi! I have a Fuji S5000 digital camera. Straight outta the box it is capable of being used as a webcam...but only on a PC. It uses a program called PictureHello. I've heard rumors of third party developers creating programs that let MAC users use their digital cameras as webcams as well. Anyone know if there may be such a program or where I may find it? Any guidance is appreciated.
    Thanx!
    466 Mhz Digital Audio G4   Mac OS X (10.3.5)   30 GB, 640 MB RAM

    Dave,Welcome to Apple Discussions.
    iChat in Panther allows the use of any camera with a Firewire connection. This little piece of software says it allows you to do the same with any USB camera (which I assume yours is).
    HTH
    mrtotes
    P.S. MAC = Media Access Control, you are using a Mac.

  • Trouble installing Elph camera solution disk on Mac version 10.8

    Just bought a Power Shot Elph 110 HS and the disk says it's for Mac version 10.6.  I have a Mac 10.8 and it won't install.  How do I download a more recent version of the camera solution disk?

    Hi Mandz2,
    For updated versions if the software for your PowerShot ELPH 110 HS, please go here.
    You'll need the CD-ROM in the optical drive of your computer to install the "PhotoStitch 3.2.6 Updater for Mac OS X"
    When installing the software, please install ImageBrowser last.  This allows it to link to the other Canon software.
    You'll need an active internet connection when installing the software.  Please follow any on-screen instructions carefully.
    I hope this helps..
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How to remove "Ads by Media Player" using Chrome? Online solutions are for Windows

    How to remove "Ads by Media Player" using Chrome? Online solutions are for Windows.
    Having relentless pop up ads which open new browser windows. Searched all over for a Mac solution and can't seem to find one. Help please!?

    http://www.adwaremedic.com/index.php
    (Read the whole page to learn about adware!)

  • I cannot mount my digital camera

    So I have very old and crappy digital camera HP Photosmart 433. I use it for reading memory cards on my pc. So I plug the usb cable..
    Oct 10 20:24:41 marduk usbcore: registered new interface driver usb-storage
    Oct 10 20:24:41 marduk USB Mass Storage support registered.
    Oct 10 20:24:46 marduk scsi 2:0:0:0: Direct-Access HP PhotoSmart 43x No.1 PQ: 0 ANSI: 0
    Oct 10 20:24:46 marduk sd 2:0:0:0: [sdb] 124250 512-byte hardware sectors (64 MB)
    Oct 10 20:24:46 marduk sd 2:0:0:0: [sdb] Write Protect is off
    Oct 10 20:24:46 marduk sd 2:0:0:0: [sdb] 124250 512-byte hardware sectors (64 MB)
    Oct 10 20:24:46 marduk sd 2:0:0:0: [sdb] Write Protect is off
    Oct 10 20:24:46 marduk sdb: unknown partition table
    Oct 10 20:24:46 marduk sd 2:0:0:0: [sdb] Attached SCSI removable disk
    Oct 10 20:24:46 marduk sd 2:0:0:0: Attached scsi generic sg2 type 0
    [root@marduk ~]# mount /dev/sdb /mnt/usb
    mount: special device /dev/sdb does not exist
    [root@marduk ~]# ls /dev/sd*
    /dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sda4 /dev/sda5
    I can enter via windows xp in virtual box, I see the files, bet when I try to copy them, it hangs up.
    How to make that god damn thing work?

    If you<ve only got pictures on that memory card, then I suggest trying to use a program like gtkam (if using GNOME) or digikam (if using KDE) or something similar to download the pictures.
    I doubt that you could mount your camera as a partition, since the kernel doesn<t recognize a partition table on the device.

  • How can i use a digital camera as webcam?

    the iSight camera *****. I have a 12mp canon digital camera, can i use that in lieu of iSight to use in iChat and Facetime?
    if so, what's the procedure? i have a macbookpro on snowleopard 10.6.8

    Hi,
    The External iSight camera has a 640 X 480 pixel picture as do the early internal ones.
    Later versions of the iSight camera have 1.3mp resolutions and the latest are HD.
    However iChat only sends a max size or 640 X 480 picture and that is dependent on your Processor and Internet Speed. (And to some extent that of your Buddies)
    Using a Stills camera was a web cam can present some problems.
    It is mainly about what input the computer accepts and what the camera has as output.
    I have an older Kodak DC4800
    In addition to the USB Output for transferring pics it has a RCA pin type socket that output TV signals which the camera software can change between NTSC and PAL.
    I then used a DV Converter to input that over FireWire to the computer.
    For iChat this had to be converted to DV as it only accepts DV or certain USB web cam formats that the Mac then converts for iChat (effectively it digitizes the pic).
    My camera did not take Video it just had the Ability to output what the camera saw - basically you could use a TV as a super sized Viewfinder.
    If the camera you have has FireWire and it can do video then you maybe in luck  (It will still depend if the Video format is DV (not mpeg, not HDV or any other format such as AVI)
    If the Video it may do can be sent of USB that will need to be USB 2.0
    Again the format will need to be the type that iChat uses (or the OS software converts).
    For most Stills cameras this is impossible.
    8:58 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Using Consumer Digital Camera for the Vision System

    I am evaluating, if I can use a consumer digital camera for the vision system. I wanted to see if anybody out there have done that in past? The other question is, do the consumer camera manufacturers provide the driver software in order to retrive the images directly from the camera to the computer ?

    I think your suggestion is right, using a firewire camera is much
    straightforward. But some consumer cameras have advantages too because
    of the very high resolution, especially the newer models of digital
    still camera. If the cameras support PTP protocol, then I have a
    LabVIEW driver for them. Check out more details at:
    http://www.hytekautomation.com/Products/PTPCam.html
    Irene He
    Bruce Ammons wrote in message news:<[email protected]>...
    > You would need a really, really good reason to use a consumer camera
    > instead of a machine vision camera. The hassle you would go through
    > to get drivers working and get everything else to work the way you
    > want is not worth it. You may pay more for a machine vision cam
    era,
    > but it will work with a minimum amount of effort. Nowadays, the
    > firewire cameras are cost effective and you can put together a system
    > that doesn't cost much more than your consumer camera would.
    >
    > Bruce

  • Need to use a Digital Camera remotely from the PC

    Hi I need to build an app that gives the user the power to control all the settings as posible of his digital camera.
    I read that I need to use TWAIN or JTWAIN but this api, uses the interface of the digital camera. For example when I want to take a picture, I select my Canon Device, and then it open the canon UI to take the photo. I don't want it. I want to build an app to control the camera with my app, no with other 3rd part soft.
    So Please if someone help me, please answer this thread.
    I know this app which make all the functions that I need to do in my app, but I don't know in which language is developed.
    This is the web site:
    http://www.breezesys.com/PSRemote/index.htm
    Maybe I need to develop this app in another language, so If someone consider this, tell me, because I don't know how to do it.
    Sorry for my english...
    Thaks a lot... I hope someone help me...

    You can download a fully functional version of Lightroom 2.3 from the links I show below. Once installed, you can use it for 30 days without a serial number, but after that you will need to purchase it otherwise it will stop functioning.
    Windows downlaod: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4360
    Mac download: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4359
    Note that the 30 day trial palces no restrictions on use (i.e. you can edit, export, create web galleries or slideshow and even make prints).

  • Using a Digital Camera (like a Canon Powershot/Elph/Ixus) with iChat

    Hello
    Anybody know if its possible to use a small digital camera like a Canon Powershot with video capabilites with iChat - instead of an iSight or built in camera like on the new Intel MacBooks?
    Thanks

    My current camera on my G4 is a stills camera.
    It is a Kodak DC4800 of some vintage now.
    It has a PAL (or NTSC) TV signal that it can output.
    From there I use a DV Converter to get it into iChat.
    Effectively this means it depends on the Output and what you have to get it in to iChat.
    If the camera can stream Video then it is better if you have a Firewire device.
    If the Camera can be seen by iMovie but not iChat then try
    http://www.ecamm.com/mac/ichatusbcam/ as it would then have Mac Drivers if it has a USB connector.
    6:44 PM Sunday; March 11, 2007

  • Cannot use iPhone 5S camera after upgrading to iOS 8.1.2

    I just bought a new iPhone and used it for a day. On the second day, I updated the iOS to 8.1.2. Then strange things happened:
    I couldn't use my main camera. It went completely dark and the buttons couldn't be used
    The phone got heated up if I opened just several apps
    Is there any way to fix it rather than getting a phone replacement? It took 30 days to get it and it's not quite acceptable for me right now. I have done the following:
    Restart the iPhone
    Disable all restrictions
    Hard reset the iPhone
    Reset all settings
    Reset the iOS installation
    Nothing works.
    My phone is iPhone 5S 64 GB. Could anyone help? Or can I confirm that it's totally a hardware failure and I need to get the replacement?

    Hi Restore  Back to Factory  Settings over your WiFi Go to Settings iCloud check last backup. Since ios 7 when you put your iPhone or charge it  Automatically backs up to iCloud After Restore just use same Apple ID  Then you will get your Apps & data back. Cheers Brian

Maybe you are looking for