I cannot use my pci5112 card with LV ver. 6.0

I'am trying to use my pci5112 card with LV 6.0 using the DAQ solutions. I get a message saying that I have not configured any DAQ devices. When I launch MAX I see the card there and the test panels are ok.
I have the niscope1.6 driver installed.
Any ideas?
Thank you in advance.

The PCI-5112 can only be programmed with NI-Scope. That's why the PCI-5112 does not work with the DAQ Solution Wizard.
Fortunately, there are lots of good examples for NI-Scope in LabVIEW. You can find these in the C:\Program Files\National Instruments\LabVIEW 6.0\examples\instr\niScope directory. I would recommend starting with the Configured Acquisition example and then going from there depending on the needs of your application.
Hope this helps,
Jack

Similar Messages

Cannot use seconf graphics card with Hp envy Recline

The HP recline has 2 display adapters , INtel integrated 4600 and Nividia Gt730A. I tried to force use of the Nividia card by selecting it in the nividia control panel as the default card but it does not work. I ran dxdiag and it still show intel as the default card.
I tried to run 3DMark11 buy selecting Nividia but it wont run and I gethis error message:
"Workload Single init returned error message: No outputs found on DXGI adapter"
3Dmark11 will run with either Auto or Intel graphics card selected (but with very poor frame rates )
So now I am not sure whether the GT730 is working of not or is there something wrong with DXGI? , DX11?
Advise please.

The 3D mark11 support forum informed that this is normal. Explanation is as follows:
Quote:
"This is due to how your system is set up. The dedicated video card has no outputs - it isn't connected to a monitor. Instead your system uses some fairly elaborate gaffer tape in the video driver to render things in the dedicated card, then copy them to the integrated card video buffer which then displays them to the monitor.
In systems like this only "auto" will work. It should still use the dedicated card (score should be different from using just the integrated one forced). "
End Quote:
At end of the 3DMark 11 Tests , the summary did indicate that GT730A was used . So it's not really an issue but rather the way the dual graphics cards work in the HP Envy Recline.

HT1904 I recently received a substantial refund from purchases my grandson of 8purchased. I tunes graciously refunded the money. However now I cannot use my credit card to make purchases for thr game I play.

I recently received a refund from I tunes which I appreciated. My little grandson who is 8 made $460 worth of purchases without my knowledge. However now I cannot use my credit card for further purchases on the game I play. Getting itnacross to ITunes is difficult.

dawnfromcabot wrote:
ITUNES HAS CHARGED MY DEBIT CARD $99.99 FOR GLOBAL WAR RIOT-SOME GAME I DID NOT KNOW WAS LOADED ON MY OTHER PHONE; HOWEVER, WHEN I PULLED UP THIS APP TO SEE EXACTLY WHAT IT WAS WAS I SURPRISED TO SEE I COULD DOWNLOAD IT FOR 'FREE'. I HAVE CONTACTED ITUNES THROUGH THIS REDICULOUSLY CHICKEN SH_T SYSTEM THEY USE SO THEY DO NOT ACTUALLY HAVE TO HEAR HOW UPSET A PERSON IS NOW THAT THEY CANNOT BUY FOOD FOR THEIR CHILDREN BECAUSE OF A MISTAKE MADE ON ITUNES PART. I DID RECEIVE AN EMAILED RESPONSE FROM STEPHANIE WHO ADVISED THIS WAS PUCHARED ON A PHONE THAT HAS PURCHASED DOWNLOADS IN THE PAST. I WONDER IF SHE THOUGHT TO LOOK AT MY ENTIRE DOWNLOAD HISTORY AND DISCOVER THAT NOTHING HAS EVER BEEN PURCHASED ON MY ITUNE ACCOUNT IN THE AMOUNT REMOTELY CLOSE TO WHAT THEY ARE CHARGING ME NOW. THAT IS BECAUSE I DO TRY TO MONITOR THIS ACCOUNT AND OBVIOUSLY THIS LAST PURCHASE WAS DONE WITHOUT MY KNOWLEDGE UNTIL I CHECKED MY ONLINE BANKING ACCOUNT, WHICH I DO EVERY DAY. TO MAKE MATTERS WORSE THE APP STATES IT IS FREE TO INSTALL WHEN YOU PULL IT UP SO NO ONE HAS CLARIFIED TO MY WHERE THE $99.99 COMES INTO PLAY. I WILL NOT DROP THIS UNTIL MY BACK ACCOUNT HAS BEEN PROPERERLY CREDITED IN THE SAME TIME FRAME IT TOOK YOU TO TAKE MY MONEY. I WILL LAUNCH A COMPLAINT WITH EVERY POSSIBLE ENTITY IN THE ITUNES COMPANY AND BUSINESSES OUTSIDE THAT REGULATE THEIR BUSINESS UNTIL THIS HAS RESOLVED IN MY FAVOR AS I AM THE ONE WHO HAS BEEN VICTIMIZED BY A COMPANY I INVITED INTO MY TELEPHONE NETWORK IN GOOD FAITH!!!!!!!!!!!!
Reading that is giving me a headache, how about normal type.

Why can't we use iTunes gift cards with family sharing? After Christmas, we now have lots of account credit we can't use. Very frustrating.

Why can't we use iTunes gift cards with family sharing? After Christmas, we now have lots of account credit we can't use. Very frustrating. There is no option found for using account credit.

I just logged out of my daughter's account and back in, and now it works. Deducted from gift card account balance. So I hope this is resolved.

Hello i try to use another SIM card with my iphone 4s now it said i need to unlock the phone with my Sim carrier

Hello i try to use another SIM card with my iphone 4s now it said i need to unlock the phone with my Sim carrier ... here is what it says below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

So.. You need to contact the carrier for the iPhone's original sim card, and request they unlock it. The carrier is the only one that can unlock the sim of the iPhone.

I want to use the sound card with LabView

Hi. Who can help me, I want to use the sound card with LabView, I have found the function but I can't use it. Thanks.

Christi,
In LabVIEW 6.1 I found some examples they use those sound VIs. They are located in \examples\sound folder. Those examples should give you a good overview how to use the VIs.
Hope this helps
Roland

I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

I get the message "You cannot use the application "AdobeApplicationManager" with Mac OS X

Hi LegallyArmedAm,
Are you still getting the message?
-Dave

I cannot use my prepaid card in apple store

Why I cannot use my prepaid card in apple store

That happened to me to and unfortuanatly, i've done some resarch and it won't come back. UNLESS you still have the plastic card, give them a call and they should redeem you. So next time you get a prepaid card, don't throw it away, keep it. Best of luck(:

Cannot use the application "Safari" with Leopard

When I try to open Safari in my non-admin account I get an error message reading 'You cannot use the application "Safari" with this version of Mac OS X'.
Bizarrely, if I logon as the admin account it works perfectly.
I have repaired permissions, run software update, repaired permissions again, logged in as SU and fscked and still the same thing. I discovered that Omni Outliner would open the plist but I don't have the knowledge to interpret that.
I think I have used Safari on this laptop since upgrading to Leopard. Most of the time I use Firefox so it hasn't been an issue anyway. The really bizarre thing is it works normally in the admin account.
All suggestions welcome.

Thanks for that. Tried it to no avail
I have found out what has gone wrong but I have no idea how.
I keep all my browsers in a subfolder of the applications folder. I trashed Safari with the intention of downloading a clean version from the Apple website. When I got there I couldn't find a version for OS X (there may be one, it just isn't obvious). So I thought I'd just try Safari one more time from my admin account. Of course the app wasn't in the browser folder. So I went to put it back in the applications folder with the intention of moving it from there to the browsers subfolder.
But no. There was already a newer version in the applications folder. How did it get there? I have no idea. But it opens. So I've moved it to the browsers subfolder and it still works.
So problem solved. I don't understand how it happened. And especially why it worked all along in the admin account.
Thanks to everyone who suggested solutions.

"YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X"

hi, just downloaded the update for mac 10.5.1 - all went well - then tried to open Safari and received this message "YOU CANNOT USE THIS APPLICATION SAFARI WITH THIS VERSION OF MAC OS X" - I have tried downloading Safari again through netscape but that does not seem to work either - ANY IDEAS???? Thanks

It sounds likely that you have more than one copy of Safari on your hard drive. The one in your Applications folder is the one you should have. The one you're trying to launch is an older version that somehow got moved somewhere else, so that the new version got installed in your Applications folder (where it should be) while the old version is running (or trying to run) from another location.
First, double-click on the Safari application file that you have in your Applications folder. Does it run properly, without error messages? If so, everything is fine. You just need to get rid of the old version of Safari and set it up so you can easily launch the new version that is in your Applications folder.
Are you clicking on the Safari icon in your Dock when you see the error message? If so, do this: Control-click on the Safari icon in your Dock and select "Show in Finder" from the contextual menu. A Finder window should open showing the location of that copy of Safari. If that Finder window is any location other than the Applications folder, delete the Safari file that is in that folder. Then drag the Safari icon out of your Dock. Navigate to your Applications folder and drag the Safari file from the Applications folder to your Dock.
You should be all set, but click on the new Safari icon in your Dock to make sure it is the correct version and runs without problems.
Message was edited by: Rachel R

" You cannot use the application "iTunes" with this version of MAC OS X."

I am getting the response " You cannot use the application "iTunes" with this version of MAC OS X." How do i get Itunes on my Mac. I tried to download the newest version but it won't let me do that either.

What operating system version are you using on your Macbook? If you are still using Tiger 10.4 the new iTunes requires Leopard (10.5) or higher.

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

Hi i dont know why i couldnt able to purchase any apps from apple store or in itunes store using my debit card with which i used to buy before ?

Hi i dont know why i couldnt able to purchase any apps from apple store or in itunes store using my debit card with which i used to buy before ?

I don't know why but I suspect you are located in the Indian sub continent. Debit cards appear to be a problem here and while many are accepted in other countries, India seems to be an exception. Go to ...
Apple - Support - iTunes - Contact Us ... and ask for help.

Use M-Series cards with DAQmx in Matlab!

Hi DAQers!
Who is this message for?
For all people wanting to use their M-Series cards (and/or NI_CAQmx drivers) with Matlab.
Content:
Basic introduction into importing DAQmx into Matlab. Simple AI (analog input), advanced AI (synchronous)
and simple AO solutions are displayed with Matlab source code.
Motivation:
There's probably little disagreement that the new M-Series cards are superior to the old E-Series cards.
However, Matlab does (as of February 2005) not support either directly.
By buying the Data Acquisition Toolbox you can access most of the E-Series' functions from within Matlab.
But this will not help you with your new M-Series card! But it is possible to use M-Series cards with Matlab.
First step
Start by loading the NI dll:
funclist = loadlibrary('nicaiu.dll','nidaqmx.h','alias','myni')
(You can choose any alias as long as it is a legal variable name.)
If your version of Matlab is too old to provide the "loadlibrary" function directly, download it here:
http://www.codeproject.com/dll/MatlabGenericDll.asp?df=100&forumid=26247&exp=0&select=972623
After importing, you see the list of available functions.
You can also display them by
libfunctionsview('myni')
That's basically it. By using the National Instruments NI-DAQmx C Reference manual and libfunctionsview('myni')
you have access to those functions. One special thing you need to keep in mind is the fact that pointers
work differently in Matlab than in C. This problem can be solved by using the Matlab function "libpointer".
Sometimes Matlab does not require a pointer when C would. But I found that it does not hurt to
specify a pointer in this case. Whether Matlab expects a pointer can be seen in the output
created by libfunctionsview('myni')
The general syntax for calling DAQmx functions is:
[outputarguments]=calllib(alias,NIDAQmx_functionname,inputarguments)
My next message will show a function I wrote that enables basic and advanced analoginput.
Jens

Hi!
As promised, my Matlab function to use the M-Series card with Matlab.
I have the bad habit of programming in German and English at the same time.
I tried to correct that for this posting. I hope I succeeded!
I wrote this function to suit my needs -which it does.
Feel free to modify it to suit yours.
Jens
Edit: I just saw that my m-File is longer than 5000 characters! #duh#
Sorry!
I'll see if I can get a download up!
Here's the abbreviated m-file without synchronous AI:
function messmatrix=NImess(synchron,trigger,numofchans,samprate,samptime)
funclist = loadlibrary('nicaiu.dll','nidaqmx.h','alias','myni');
disp('NI: Create Tasks')
taskh1=uint32(1);
[a,b,taskh1] = calllib('myni','DAQmxCreateTask','master',taskh1)
taskchans1=['Dev1/ai0:' num2str(numofchans-1)];
[a,b,c,d] = calllib('myni','DAQmxCreateAIVoltageChan',uint32(taskh1),taskchans1,'',-1,-10,10,DAQmx_Val_Volts,'')
nsample=samprate*samptime; %
disp('NI: Config Sample Clock')
[a,b]=calllib('myni','DAQmxCfgSampClkTiming',taskh1,'',samprate,DAQmx_Val_Rising,...
DAQmx_Val_FiniteSamps,nsample)
disp('NI: Config Digital edge start trigger')
if trigger==1
[a,b]=calllib('myni','DAQmxCfgDigEdgeStartTrig',taskh1,'/Dev1/PFI0',DAQmx_Val_Rising );
else
[a]=calllib('myni','DAQmxDisableStartTrig',taskh1)
end
disp('NI: Start task(s)')
[a]=calllib('myni','DAQmxStartTask',taskh1)
DAQmx_Val_GroupByScanNumber = 1;
readarray1=ones(numofchans,nsample);
readarray1_ptr=libpointer('doublePtr',readarray1);
sampread=0;
sampread_ptr=libpointer('int32Ptr',sampread);
empty=[];
empty_ptr=libpointer('uint32Ptr',empty);
arraylength=nsample*numofchans; % more like "buffersize",
disp('NI: Reading Data!')
[a,readarray1,sampread,empty]=calllib('myni','DAQmxReadAnalogF64',taskh1,-1,-1,...
DAQmx_Val_GroupByScanNumber,readarray1_ptr,arraylength,sampread_ptr,empty_ptr);
disp('NI: Stop task')
[a] = calllib('myni','DAQmxStopTask',taskh1);
disp('NI: Clear task(s)')
[a] = calllib('myni','DAQmxClearTask',taskh1);
messmatrix=[readarray1'];
disp('NImess finished')

Can i use SLE4428 smart card with java card developmentkit 2.1.2

Can i use SLE4428 smart card with java card developmentkit 2.1.2
plz reply

No. SLE4428 is memory card and not Java Card.

I cannot use my pci5112 card with LV ver. 6.0

Similar Messages

Maybe you are looking for