I cannot use the bottom part of my touch screen. It would not respond to any of the touches I make. Is the screen broken or have I stuffed up my settings? I want to be able to type on my iPhone

Basics from the manual are restart, reset, restore from backup, restore as new. If you've been through ALL these steps and you still have the problem, you'll need to bring the phone to Apple.

Similar Messages

The drop drop down box from Yahoo that says "Do you use the Yahoo! Toolbar on multiple computers? will not respond to clicking on it. It Stays in the drop down position covering other tabs and makes them unuseable.

this box with three options: learn more, save to my Yahooa1 ID, No thanks, just save to this computer, will not respond when any option is selected. It will not go away. It covers other tabs making them useless.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

We had to force quite iMovie, now we cannot get it to open. It keeps saying it is not responding. Any tips?

We were building a video in imovie when it stopped responding. We had to force quite the program. Now when we cannot get imovie to open.
Any tips?

The Problem is resolved by :
Click on the "Start" button. Click "Run." Type the word "cmd" in the open box. When the DOS screen comes up, type "netsh winsock reset." Press "Enter." Type "exit" to close the DOS window and go back to Windows.
Restart the computer.
Thanks to my friend Sunil.
Read more: http://www.ehow.com/how_2125133_do-winsock-reset.html#ixzz2kyccghec

Every since the June 22 security update, I get Mozilla Firefox (not responding) at any page I go to. Have to sit and wait several minutes for it to load each page. Getting all kinds of errors in arsing values. Declartion dropped. Etc.

Warning: Expected declaration but found '*'. Skipped to next declaration.
Source File: http://support.mozilla.com/media/css/questions-min.css?build=93872dd
Line: 1
Warning: Unknown property 'zoom'. Declaration dropped.
Source File: http://support.mozilla.com/media/css/questions-min.css?build=93872dd
Line: 1
Warning: Error in parsing value for 'display'. Declaration dropped.
Source File: http://support.mozilla.com/en-US/questions/new?product=beta
Line: 0
Warning: Unknown property '-moz-opacity'. Declaration dropped.
Source File: http://support.mozilla.com/en-US/questions/new?product=beta
Line: 0
Warning: Error in parsing value for 'background-image'. Declaration dropped.
Source File: http://support.mozilla.com/en-US/questions/new?product=beta
Line: 0
Just a few of the types of errors collected.
It is getting to be a pain to have to sit and wait until it is responding again. At that point the cursor is locked on to what ever it is sitting over. You have to click on it to release it.
Anyone have any ideas.

Glad it is fixed. Thanks for posting back, (even if we are not sure exactly what happened).

HT1349 iPhone 4s has totally locked up with black screen. No buttons respond. Prior to this trying to initiate a text message, the onscreen keyboard would not respond. tried other functions which led to overall black screen, no response to any buttons

iPhone 4s has locked up with no response to any buttons. First occurrence on a 1+ month old iPhone

Have you tried a very basic troubleshooting step well-outlined in the User Guide called reset? Hold the on/off switch and the home button togeter (usually around 30 seconds) and don't let go until you see the Apple logo.
I highly recommend reading the User Guide to learn about other general troubleshooting steps.

HT1947 I had this app on my IPhone 4S and never had a problem. Now on my IPhone 5 it only works sporadicly. If I do a hard reboot it will access the Apple tv but on most occacciosn it does not connect. Any one else?

I had this app on my IPhone 4S and never had a problem. Now on my IPhone 5 it only works sporadicly. If I do a hard reboot it will access the Apple tv but on most occacciosn it does not connect. Any one else?

Do you mean the Remote app?
This app requires both devices be connected to the same Wi-Fi network, are they?

Hi.. I want to be able to type quotes on my iPad like I did on my old computer using Microsoft word. What is the best replacement app on the iPad?

Hi.. I want to be able to type quotes on my iPad like I did on my old computer using Microsoft word. What is the best replacement app on the iPad?

Hit the ".?123" button. If the quotes character (over the right end of the space bar) is not to your liking, hold that button and several alternatives show up.

My picture files open up off center so I cannot see all of the bottom part of the picture.

Hi,
My picture files open up off center so I cannot see all of the bottom part of the picture. The ruler across the top read "0" to 13.5". Down the left side of the picture the ruler reads 3", 2",1", 0, 1", 2",3" etc. This leaves a three inch empty space at the top of my viewing area and I lose three inches of the bottom of my picture. I cannot figure out how to adjust this. I have tried the screen modes and they do not fix my problem. What can I do to solve this problem?

Please provide sensible details about your platform, exact version of your OS, exact version of Photoshop, complete details baout your setup, hardware details, monitor resolution, etc.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

The bottom part of my iphone4 screen cannot tap.. restored 2 times with latest firmware and yet still the same..is it possible to fix this?how?

The bottom part of my iphone4 screen cannot tap.. I restored it 2 times with the latest firmware and yet still the same..is it possible to fix this?how? please guys help me =(

iPhone and iPod Touch: Troubleshooting touchscreen response: http://support.apple.com/kb/TS1827

Preview prints lose the bottom part of the page

Yesterday, after doing an update (which only updated iTunes, so it's probably not what caused the problem), I found that all print jobs from Preview (and a few other programs that I've tried) are missing roughly the bottom 1 cm of the page. I've grovelled through all the settings and preferences that I can find, and I've made various other things change, but no matter what I do, nothing makes the bottom line of text appear on the paper.
Preview shows all the text, including the bottom line, and when I use the "PDF" button to "Open PDF in Preview", it shows the page with the bottom text. But when I print the page, the bottom line is blank.
The printer is remote, controlled by CUPs on a machine down the hall. When I scp a PDF file to the server and print it there, it prints fine, and the bottom lines are always included. Then when I go back to my Macbook Pro and print exactly the same PDF file on the same printer, the bottom line is again missing. This shows that it's not a problem with the printer or the server's CUPS software; it's gotta be something on my Macbook Pro that changed.
The usual disclaimer applies: I haven't (knowingly ;-) changed any print-related setting recently. (We've all heard that one before, right? ;-) Since the problem appeared, I've of course changed lots and lots of settings, trying to find something that affects the problem. But the most recent change before this problem appeared was a couple of months ago (when another upgrade broke all remote printing, and I had to delete all the printers and reinstall them).
A possible clue is that, when I use Safari to load a PDF from http://localhost/..., the page shows as usual, and I get the same drop-down from CMD-P that shows a preview that has the entire page. But when I print it, the entire page is shifted vertically so that the top title line of text is missing - and the bottom line has only its upper half, with the bottom part of all the characters missing. Again, the blank strip at the bottom is roughly 1 cm. Actually, a quick check with a ruler says that it's 12 mm. But I don't know how to use this info, or how to tell Safari to fix the missing title line. The missing bottom half of the bottom line seems to say that it's not that the PDF has something wrong that suppresses the text entirely; it would seem to say that somebody is deciding to impose a 12-mm bottom border for some unknown reason.
Any idea where I should look to fix this problem? Is there a relevant troubleshooting guide somewhere that I should know about?
(It sure would be nice to have a known way to say "Just print exactly what's on the Preview page; don't try to do anything clever with it." ;-)

That doesn't sound quite right. Tests on the server shows that the printer (HP L7680) can in fact print up to within 3 mm of its edges. The test pages show this, and assorted tests with "real" PDF pages in the past have verified it. It worked from my Macbook up to a few days ago, and tests from the server show that the printer hasn't lost the ability to print close to the edges. In fact, my wife printed a page from her iMac a while ago, and it showed stuff (images and border lines) up to about 4 mm from the edges. It's only from my Macbook Pro that suddenly the bottom 12 mm gets blanked out.
Actually, I did try a test from the server with the "borderless" setting. The software enlarged the image to be bigger than the page, for some reason that I don't understand, but the result was that the printer printed right up to the very edge of the paper; there was ink visible on the edge of the sheet. So the idea that the printer "can't" print close to the edge is wrong. The printer doesn't have a problem here; it's being told by some software on my Macbook Pro to blank out the bottom edge.
I just tried another test of this: I told Preview on the Macbook to print the page at "Scale: 120% ", and checked "No automatic page scaling". Preview showed the text going off the page at the top and right edge, The ink stopped about 3 mm from the top and right edges. But the bottom 12 mm, including the bottom line of text, was blanked out. This, plus the tests on the server, shows that the printer can print up to 3 mm from the edge of an 8.5x11 inch page. And earlier tests that produced the bottom line with only the top half of the characters shows that it isn't just dropping the bottom line; Something on the Macbook is explicitly blanking out the bottom 12 mm (but not doing the same on the top and right edges.
And whatever is doing it doesn't happen on my wife's iMac; she can print close to the bottom edge.
I'm now wondering if I should uninstall the printer on the Macbook, and see if I can reinstall it to match the iMac's settings. But if the problem is something in the Macbooks system libraries that's forcing the 12-mm bottom margin, that probably won't work, either, and the "Letter" paper size settings presumably come from some library file, because it won't permit me to change those numbers.
Anyway, I'll try your suggestions, probably in the morning, and see what happens.
About the Borderless type: I find that when I try setting the Paper Size to "US Letter", it gives me another menu, with "US Letter" and "Borderless 8.5 x 11 in." entries. If I choose the Borderless, it pops up a window with a warning that this is only allowed for HP Premium Plus Photo Paper, which is in what it's set to. It says it's "not available when Paper Type is set to Plain Paper", which it won't allow me to do. (That choice is greyed out.) It seems odd that it would warn me that it won't work for a setting that it won't let me use anyway, and say that I must use the setting that I am using. Anyway, I've tried this "Borderless 8.1 x 11 in." setting, and it comes out the same as the "US Letter" choice, with the bottom 12 mm blank. Both print to nearly the top and right edge if I set the Scale to 120%.
(And that damned "Automatically rotate each page" is checked again. ;-)

I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

Hi BelleDesign,
"Headers" is short for "Continuing Headers."
Use a Header when you want recurring information on a series of pages in your document.
If ii, iii, etc. are page numbers, you can place them in Headers using Insert > Page Number, then formatting the page number to lower case Roman numerals.
For more on Headers and Footers, see Chapter 3, Working with document parts in the Pages '09 User Guide, available for download via the Help menu in Pages. Discussion of Headers and Footers starts on Page 54.
Regards,
Barry

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

Dreamweaver design view doesn't show the bottom part of a long div

Hi!
I'm doing a very graphics oriented site, which basically requires me to use a large jpg as a background image and placing text areas against this background using absolute positioning.
My problem is that Dreamweaver doesn't show me the bottom part of my content div's background, but renders it as black instead. This obviously makes placing the text areas correctly difficult, since I can't see them against the background.
If I turn on Live view, then Dreamweaver shows the bottom part correctly. But in live view I can't use rulers and guides (or can I?).
Is there any setting that I can change so that Dreamweaver is showing me the whole div bg in all situations? One possible cause of this problem might be also that I'm using overflow:scroll on my content. Could that be why Dreamweaver hides the bottom part and can I change that behaviour?
Any ideas are welcome!

If we can see the page in question we could probably do this a lot easier. But all you need to do in your CSS for the background is:
background: url(pathto/image.jpg) fixed no-repeat;
If you are trying to absolutely position something in the middle you will be unable to do this without the assistance of javascript to determine the useable pixels on the end-users computer. Horiztonally is not the issue, but rather vertically because you can achieve horizontal centering by defining a width and setting the margin: 0 auto; in your CSS.
As far as working with overflows, if there is too much content in them that you believe the overflow will be necessary (assuming min/max-widths are set) you could consider including the content from another document or store it in a database and query the information out. Then it would make it easier for the client to update the content on their own in the future.

HT4059 The last three books I have downloaded at the bottom of the page the bottom parts of y,g,and j are appearing at the top of the next page. Any help or suggestions will be appreciated.

This problem just started. On the last line of each page if the letters y,g,p or j appear in the line the bottom part of each of these letters appears at the top of the next page while being chopped off the actual line it should appear in.

*Update*
I thought I had found the offending 'app' namely "Songpop."
I regularly use "Songpop" on my phone late at night via my wifi connection.
All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
"Songpop" have now responded that "This is an issue to take up with Apple Support" see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
Hopefully someone at Apple can respond ....

HT201406 why is the touch on the bottom part of my screen not working all of a sudden on iphone 4s?

all of a sudden over night the bottom part of my screen does not react to touch i have moved the bottom row icons through itunes but this still doesnt allow me to use this section of the screen once im inside an app. such as banking?????????

Hi zoejane1710,
Thanks for visiting Apple Support Communities.
It sounds like your touchscreen is being unresponsive. The steps in this article can help:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
Jeremy

I cannot use the bottom part of my touch screen. It would not respond to any of the touches I make. Is the screen broken or have I stuffed up my settings? I want to be able to type on my iPhone

Similar Messages

Maybe you are looking for