I cannot use the managed driver beta on Mono

Managed driver beta has been released. However, I cannot use it on Mono, which is a Dot Net Environment on Linux.
The fata exception is type load fail...
So I want to know what else dll the managed driver depends.
Look forward for your reply.
Mikes

Mono isn't supported by the beta nor will it be supported in the first production release. Oracle will consider supporting Mono in a release after the first production release.

Similar Messages

Robustness "Managed Driver Beta" with earlier versions of clients

Hello,
i have tested the "Managed Driver Beta".
It works well.
It really is a great relief to distribute only a reference.
I have a production system in a live environment.
It is very important that there are no disturbances.
Now to my question:
Is there really when using the "Managed Driver" no problems with already installed clients with earlier versions? e.g. ORANT?
Thanks
Armin

Yep. It's nicely self-contained in its own assembly and namespace and doesn't impact on other things. If you really want to be paranoid about it, distribute it with your project instead of installing it on the server directly. That'll put it in your project's \bin folder and no other code will even realize it's there.

PhotoSmart C4580 cannot use USB flash drive

I just installed a PhotoSmart C4580 on a Dell Optiplex 360 running Windows XP Professional, SP3. If the printer is turned on, whenever I plug in a USB flash drive, I get a Windows error message to the effect that Windows does not recognized the device and it is unuable. If I turn off the printer, all works well. Any ideas?

Charlie, did you ever figure this one out. I also cannot use the flash drive if my HP printer is on.

Nokia Connection Manager - Cannot use the connecti...

Can someone PLEASE try and help me
I have the following details:
Phone: Nokia C5;
Operating system: Microsoft Windows XP Service Pack 2
Nokia PC Suite: Version 7.1.60.0
I cannot use bluetooth & USB connection. When I try to select it in the Connection Manager I get an error message " Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia) ". I have tried to reinstall nokia pc suite but no result. The connection worked before. The PC Suite of my computer was upgraded and now the bluetooth & usb are not working any more.
Please Help Me
Attachments:
Nokia_Connection_4679E9820AC32C34D11CBCDBA8237BA5_5.jpg ‏20 KB

Could you please try this?
I am not sure whether this will solve your problem but you could try this once.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Nokia connection manager: cannot use the connectio...

I'm using Nokia PC Suite 6.80.22 on a Fujitsu laptop (Windows Vista). This is the technical stack:
Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United States)
Input language: English (United States)
Nokia PC Suite:
Version 6.80.22
Language: English
Connectivity Cable Drivers:
Version 6.80.5.1
Bluetooth stacks:
Microsoft Bluetooth stack
Version 6.0.6000.16386
Toshiba Bluetooth stack
Version v5.00.07
I have problems while trying to connect to my phone via Bluetooth. It shows the following error: Cannot use the connection type.
In the PC Suite I go to Manage Conections and I see two bluetooth interfaces:
- Bluetooth(Microsoft) THIS IS ENABLED
- Bluetooth(Toshiba)
When I try to disable the Microsoft driver and enable the Toshiba driver it show the error: CANOT USE THE CONNECTION TYPE (CODE: OPENMEDIA)
Any ideas will be highly appretiated!

I have exactly the same problem only my operating system is a bit different. I surfed through the net with no luck
This is my system's details:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United Kingdom)
Input language: English (United Kingdom)
Nokia PC Suite:
Version 6.81.13.0
Language: English
Connectivity Cable Drivers:
Version 6.81.1.2
Microsoft Outlook:
Version 10.0
Build 2616
Bluetooth stack:
Microsoft Bluetooth stack
Version 5.1.2600.2180
Furthermore, my infrared connection and USB modem doesn't seem to be working. I have installed and re-installed the Nokia PC suite throughly. I dont know if my computer has something disabled or whether it's my phone (N95)
Any suggestion would be grately appreciated,
Do let me know if you found the solution to this prob.
Cheers,
Helpless

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

I have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive I keep on getting the message "lightroom cannot use the catalog named " " because it is

I have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive I keep on getting the message "lightroom cannot use the catalog named " " because it is not writable and cannot be opened. I have fixed all the "permissions" and yet it will still not open. How do I fix this?

Hello Forum Members,
I figured it out. You have to select the actual logo of the Lightroom catalog and then click on "get info" and allow what ever your new user name to "read and write". That worked!
Henri Silberman

HT4623 I have an iPhone 4S that i dont use anymore. It is locked with a password & i can't remember the password. i am wanting to let my child use this phone now but when i connect it to my computer it says that it cannot find the device driver. How can i

I have an iPhone 4S that is locked with a password & cant remember password. when I connect to my computer it says that it cannot find the device driver. How can i fix this?

Hello jlb1977,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Best of luck,
Mario

Cannot use 2 optical drives (Apple Super drives) at the same time after downloading OS X 10.8.5. Reported to Apple Care. Anyone else have this problem?

Cannot use 2 optical drives (Apple Super drives) at the same time on my iMac after downloading OS X 10.8.5. Reported to Apple Care. Anyone else have this problem?

Cannot use 2 optical drives (Apple Super drives) at the same time on my iMac after downloading OS X 10.8.5. Reported to Apple Care. Anyone else have this problem?

How do I load drives when there is nothing on the web site and i cannot use the disk

cannot set up. shows up on my laptop, but is not really connected. cannot use the set up disk because i do not have drive for it and the drivers are not showing up on the website. what should I do?

suze123 wrote:
cannot set up. shows up on my laptop, but is not really connected. cannot use the set up disk because i do not have drive for it and the drivers are not showing up on the website. what should I do? Hi,Have you tried this link??http://www.findprinterdrivers.com/2015/04/hp-color-laserjet-pro-mfp-m277dw-driver.html

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

"Cannot use the connection type ...."

Nokia 6233
Windows XP SP2
LaunchApplication.exe v 6.82.70.1
Bluetooth "i.Tech BlueCON U"
O2 Bluetooth Dongle Drivers
Using Bluetooth OK to download photos to PC, but no other function so far.
Trying Nokia PC Suite to perform various functions - failure in all cases, common message is "Cannot use the connection type. Check that the needed hardware, software and drivers are available".
No clues anywhere as to what is needed.
Bluetooth clearly works. Nokia PC Suite can't use it.
Totally stuck - wish to use PC connection to synchronise address books.
Help, please.

Hi,
I think that PC Suite is not support your Bluetooth driver. Here you can find what drivers are supported:
/discussions/board/message?board.id=connectivity&message.id=114
Anyway, if Microsoft's BT driver support your BT HW, you can try to that stack also...
So, if you want to try to use MS BT driver:
1. Go to Control Panel, System, Hardware and Device Manager.
2. Open Bluetooth Devices, select that device, click Action, Uninstall and OK.
3. Click Action and Scan for hardware changes.
(windows should automatic install MS BT driver)

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

I cannot use the managed driver beta on Mono

Similar Messages

Maybe you are looking for