I cannot use wifi

I cannot use the Wifi for my MacBook Air and the error image is as follows:
This computer was unable to join the Wi-Fi Network you selected.You may have entered an incorrect password or network name, chosen the wrong type of wireless security, or you may be out of range of the station. To change your previous choices click start over.
Actually, my network is fine because I can run my HP laptop for no problem. Please advise me going forward!
Thanks

If you're using WEP encryption, it should be changed to WPA2. Here are other considerations:
http://support.apple.com/kb/HT4199

Similar Messages

Iphone6 plus automatically turn off (frequently)and cannot use WIFI

Just bought Iphone6 Plus 16GB Gold on 15 Dec 2014 from The Australian official Apple website.
In this week, my phone turn it off automatically (very frequent, it seems like if i not use my phone, it will shut down)
and cannot normally turn on the phone, i can only turn it on through HOME BUTTON + TURN ON/OFF BUTTON.
And after i turn on the phone, the WIFI button become GREY COLOR, which means i cannot use WIFI, cannot turn on/off.
And i try to restore setting from the phone and also from iTunes through computer, it doesn't help.
Does anybody know what happen to my phone?

hi，
so can I ask how do you solve this problem？
在 2015年1月10日，08:39，Apple Support Communities Updates <[email protected]> 写道：
You received a reply
coolbeanz has replied to your question. You can view the full discussion in Apple Support Communities.
Iphone6 plus automatically turn off (frequently)and cannot use WIFI
I have this same problem, but with an iPhone 6, 16GB Gold
Correct Answer Helpful Answer
Use the buttons above to tell coolbeanz and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to coolbeanz, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

HT1202 My (iPhone 4S) wifi toggle bar has grey out. I cannot use wifi anymore. What to do?

My (iPhone 4S) wifi toggle bar has grey out. I cannot use wifi anymore. What to do?

try the steps provided in the link below:
iOS: Wi-Fi settings grayed out or dim

TS1398 Cannot connect to internet by WIFI for first time (after active iphone by iTune, because cannot use WIFI to active)

I just bought a iphone 5 32GB White from Apple store. However, the first time i turn on my iphone, it cannot use WIFI to connect. Meanwhile, another device still can connect WIFI normally (example: computer, my another iphone 5 16GB)

Please help me
I tried many way to use WIFI on my iphone 5 with IOS 6.0.1. But cannot
_Turn off and on WIFI
_Reset Network Settings
_Update to IOS 6.0.2
Blah blah blah
P/s: because this is the first time my iphone turn on for active, so it has'nt connected with any Networks before.

E6-00 and Belle update : Cannot use Wifi and LEAP ...

Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
- Wifi connection using LEAP authentication
Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
- IMAP folder not found
Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
- MAPS
Say that it's empty and need maps. Give few options:
   * use OVI on the PC : OVI doesn't find MAP on the phone
   * use wifi to download map : .... if wifi would work, why not
Anybody else got the same issue ? Or found solution ?
L.\
Solved!
Go to Solution.

Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
- Wifi connection using LEAP authentication
Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
Ok try to delete your apn, reset the device and resintall the OS. Don't restore any backup ans configure the WLAN apn: settings> connectivity> settings>destinations. Into the WLAN settings go to WI-fi security settings> in the fifrst field select EAP> in the second field EAP plugin settings > select EAP-LEAP.
This way the apn will work again
- IMAP folder not found
Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
Please delete your mailboxes and configure them as you want. To create a IMAP access mailbox , for example Nokia Mail (outside of Messaging server) select Other. Put you credentials and choose Standard. You will see into Settings> your mailbox > sync content > Folder subscriptions> choose which folder to sync and it's done
- MAPS
Say that it's empty and need maps. Give few options:
   * use OVI on the PC : OVI doesn't find MAP on the phone
   * use wifi to download map : .... if wifi would work, why not
Anybody else got the same issue ? Or found solution ?
Please delete on mass memory the folder Cities and the file Qf, then open Maps and close the application. Verify that the folder Cities and the file Qf are again in E. Connect your device to Nokia Suite and redownload the cartography.

HT4623 Cannot use wifi service (sometimes cannot turn on)

After updating to iOS 6, the wifi service cannot be used sometimes. I either need to reboot the iPhone or reset the network setting to default, any other suggestions to fix this problem? Thanks

Try Settings App > General > Reset > Reset Network Settings. See if better. If still problem, Restore iPhone with iTunes on your computer. See if better. If still problem, and if there is Warranty or AppleCare make Genius reservation or set up Service and take or send iPhone to Apple for resolution.

Cannot use wifes email account to enter apple account

I just bought my wife an Ipad Mini. Trying to set it up. I do not know if she has a an account with Apple. When I try to enter her email address with her name I get this: "This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID". When I try to recover password I get, email sent. but it not coming to her address, because I think I screwed up when the email was sent to her address using Mozilla a POP up showed at right lower of screen saying something like accredited sites do not this or something to that effect. I refused without reading full message. Now when Apple sends confirmation of reset, I do not get anything.
Sure could use some help with this problem.
Thanks in advance

Got it Thanks

Cannot use wifi after updating to 6.1.2 on my iPhone 4S WIFI solutions proposed by Apple are not working

Dear Apple.
I was really happy with my iphone4s, IOS 6.0, great product amazing quality and posibilities BUT.......
I updated from IOS 6.0 to 6.1.1. and the WIFI nightmare started.
I waited for a new update to fix the WIFI problems and I updated my iphone 4s from 6.1.1. to 6.1.2. in order to solve these problems related with WIFI connections.
But IOS 6.1.2. is even worst:
- WIFI is not working at all. So I cannot download apps greater than 50MB.
- Battery life is shorter than ever.
- 3G goes in and out every minute.
- When you operate the iphone4s you can realize that is hotter than before.
These problems are unnaceptable and inconsistent with a high quality standard product.
You can read a lot of blogs, I am not the only one.
Please give us a solution as soon as possible.
Best Regards

Try Settings App > General > Reset > Reset Network Settings. See if better. If still problem, Restore iPhone with iTunes on your computer. See if better. If still problem, and if there is Warranty or AppleCare make Genius reservation or set up Service and take or send iPhone to Apple for resolution.

Cannot use WiFi on N97 Mini

I was able to use the WiFi on my new N97 mini and now suddenly it stopped working
It is still working fine on my N95
N97 Mini gives error saying "Invalid server name"
What to do????

ive had mine for 9 months.. t his morning i dropped it on the floor when i woke up and just b4 work i went to check symbian-freak and ovidaily as ususal .. then my wifi wouldnt work .. i thought no need to panic and went to work where i get wireless from my provider..
well i got home tonight and almost had a heart attack as it still wasnt working, same as you..
i tried uninstalling a few apps that i receltly installed .. nah ..
it was my router, i had to hold a pin in it to reset it ... im about to go for a walk to confirm this by stealing a few signals and making sure the phone is 100%
best of luck

HT4623 Cannot use wifi after updating to 6.1.2 on my 4S how do I restore this

Since updating to 6.1.2 my wifi is now greyed out and cannot connect to Wifi. Please help as I have tried everything.

Try Settings App > General > Reset > Reset Network Settings. See if better. If still problem, Restore iPhone with iTunes on your computer. See if better. If still problem, and if there is Warranty or AppleCare make Genius reservation or set up Service and take or send iPhone to Apple for resolution.

Curve 8520 cannot use WIFI

I was able to connect with the WIFI before I put my simcard in. I was able to connect to the WIFI after I put my simcard in. I have a AldiTalk simcard and I have internet allowance but not for browsing. That is fine.
One day the Blackberry wouldn't use the WIFI here anymore. It says it's connected but has a white line '-' instead of a green tick. I have researched a lot online and not found a solution.
In Advanced Options, my 'Host Routing Tables' is empty. No matter how many times I click 'Register now' nothing ever happens.
I thought it might just be a problem with the WIFI here, so I tried it at a friends at the weekend and exactly the same problem.
I would be forever greatful if somebody could help me out, I am at my wits end! Thank you!

The white line (rather than a green check mark) indicates you ARE indeed connected to the 'internet' but without any BlackBerry services enabled.
You should still be able to use the browser in "hotspot" mode only, nothing else.
From the home screen select Options > Advanced Options > Browser.
Under Default Browser Configuration choose Wi-Fi/Hotspot Browser.
Press the Menu key and select Save.
For more information: Article ID: KB29087 Unable to browse the Internet over a Wi-Fi connection on the BlackBerry smartphone
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot use Wifi

I just bought my touch today and I brought it home, everything works fine except for the Wifi. I have a Linksys WRT54GS and when I browse for networks, my network will show up, I can connect, but as soon as I try to open Safari it says "Unable to Find Server". I took it to a Starbucks and it works fine there, just not at home. Any ideas or suggestions?

Hi,
Looks like many people are having the same wifi issue with their personal accounts. I don't know how to cross post,but I was experiencing the exact same issue as you. Some combination of the suggestion offered to me yesterday worked. I have MAC filtering disabled, WPA encryption - but I first disable encryption and started adding security back in.

HT204409 my iphone 3gs cannot use wifi passwords that have capital letters

I have tried many times at 2 different locations to try and connect my iphone 3gs. Yes it is old, but I have comcast and it will connect to "xfinitywifi" cause the password is all lower case, but will not accept any password that has capital letters. I shouldn't have to change my password to accommodate this phone. Very frustated. Bout to go get an Android, if this doesnt get fixed.

There is no problem using a password with uppercase letters in iOS.

Cannot use wifi with my kindle touch

How can I connect my Kindle touch with my airport extreme? Although I am entering my correct password, it does not accept it.

Kindle works just fine on my AirPort Extreme.
You do not have an apostrophe or other type of thing like this in the name of your wireless network, do you?
Is the name of your wireless network a single word or phrase comprised of letters and/or numbers with no spaces?

[SOLVED] Trouble using WiFi

I haven't had problems with this before, but then again, I don't use WiFi a whole lot.
ArchLinux simply cannot use WiFi, even if it's connected. I'm not sure why that is. I am connected using the GNOME interface and what I assume is NetwokManager, although I'm not sure. I have done a lot of Googling but I can't seem to find any solutions, mainly because I don't know what is causing the problem.
Any ideas on what to do? How to diagnose the problem? How to fix it?
Last edited by Binero (2014-04-06 17:36:34)

I know I needed to give some information, but my question also was how to diagnose the problem. I had no idea what to do still. Also for some reason GNOME seems to have stopped detecting WiFi networks as well. Not sure why that is, I've not changed any settings.
lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06)
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 06)
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06)
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06)
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06)
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 06)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 06)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] [1002:68c1]
02:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60]
08:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
14:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. 1394 OHCI Compliant Host Controller [1217:10f7] (rev 01)
14:00.1 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:8120] (rev 01)
14:00.2 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/MSPRO/xD Controller [1217:8130] (rev 01)
20:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp32s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:26:b9:ed:6e:7e brd ff:ff:ff:ff:ff:ff
3: wlp8s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether c4:46:19:a3:5c:76 brd ff:ff:ff:ff:ff:ff
iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
Band 1:
Capabilities: 0x70
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (19.0 dBm)
* 2417 MHz [2] (19.0 dBm)
* 2422 MHz [3] (19.0 dBm)
* 2427 MHz [4] (19.0 dBm)
* 2432 MHz [5] (19.0 dBm)
* 2437 MHz [6] (19.0 dBm)
* 2442 MHz [7] (19.0 dBm)
* 2447 MHz [8] (19.0 dBm)
* 2452 MHz [9] (19.0 dBm)
* 2457 MHz [10] (19.0 dBm)
* 2462 MHz [11] (19.0 dBm)
* 2467 MHz [12] (19.0 dBm) (no IR)
* 2472 MHz [13] (19.0 dBm) (no IR)
* 2484 MHz [14] (disabled)
Band 2:
Capabilities: 0x70
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180 MHz [36] (21.0 dBm)
* 5200 MHz [40] (21.0 dBm) (no IR)
* 5220 MHz [44] (21.0 dBm)
* 5240 MHz [48] (21.0 dBm) (no IR)
* 5260 MHz [52] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5280 MHz [56] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5300 MHz [60] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5320 MHz [64] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5500 MHz [100] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5520 MHz [104] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5540 MHz [108] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5560 MHz [112] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5580 MHz [116] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5600 MHz [120] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5620 MHz [124] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5640 MHz [128] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5660 MHz [132] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5680 MHz [136] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5700 MHz [140] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5745 MHz [149] (21.0 dBm) (no IR)
* 5765 MHz [153] (21.0 dBm) (no IR)
* 5785 MHz [157] (21.0 dBm) (no IR)
* 5805 MHz [161] (21.0 dBm) (no IR)
* 5825 MHz [165] (21.0 dBm) (no IR)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* AP/VLAN
* monitor
interface combinations are not supported
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
systemctl --no-pager
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:01.0-0000:02:00.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/backlight/acpi_video0
sys-devices-pci0000:00-0000:00:01.0-0000:02:00.0-drm-card0-card0\x2dLVDS\x2d1-radeon_bl0.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/drm/card0/card0-LVDS-1/ra
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 5 Series/3400 Series Chipset High Definition Audio
sys-devices-pci0000:00-0000:00:1c.1-0000:08:00.0-bcma0:0-ieee80211-phy0-rfkill0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:08:00.0/bcma0:0/ieee80211/phy0/rf
sys-devices-pci0000:00-0000:00:1c.1-0000:08:00.0-bcma0:0-net-wlp8s0.device loaded active plugged Wireless 1520 Half-size Mini PCIe Card
sys-devices-pci0000:00-0000:00:1c.5-0000:20:00.0-net-enp32s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged TOSHIBA_MK5056GSY DellUtility
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged TOSHIBA_MK5056GSY RECOVERY
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged TOSHIBA_MK5056GSY OS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda4.device loaded active plugged TOSHIBA_MK5056GSY 4
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device loaded active plugged TOSHIBA_MK5056GSY 5
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda6.device loaded active plugged TOSHIBA_MK5056GSY 6
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged TOSHIBA_MK5056GSY
sys-devices-pci0000:00-0000:00:1f.2-ata5-host4-target4:0:0-4:0:0:0-block-sr0.device loaded active plugged Optiarc_DVD+_-RW_AD-7640S
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-net-devices-enp32s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
sys-subsystem-net-devices-wlp8s0.device loaded active plugged Wireless 1520 Half-size Mini PCIe Card
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
proc-sys-fs-binfmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-2.scope loaded active abandoned Session 2 of user jeroen
session-5.scope loaded active running Session 5 of user jeroen
accounts-daemon.service loaded active running Accounts Service
colord.service loaded active running Manage, Install and Generate Color Profiles
dbus.service loaded active running D-Bus System Message Bus
gdm.service loaded active running GNOME Display Manager
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
netctl@wlp8s0\x2dJesus.service loaded failed failed Automatically generated profile by wifi-menu
NetworkManager.service loaded active running Network Manager
polkit.service loaded active running Authorization Manager
rtkit-daemon.service loaded active running RealtimeKit Scheduling Policy Service
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
systemd-backlight@backlight:radeon_bl0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:radeon_bl0
systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
systemd-hostnamed.service loaded active running Hostname Service
systemd-journald.service loaded active running Journal Service
systemd-localed.service loaded active running Locale Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-netctl.slice loaded active active system-netctl.slice
system-systemd\x2dbacklight.slice loaded active active system-systemd\x2dbacklight.slice
system-systemd\x2drfkill.slice loaded active active system-systemd\x2drfkill.slice
system.slice loaded active active System Slice
user-1000.slice loaded active active user-1000.slice
user.slice loaded active active User and Session Slice
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda5.swap loaded active active /dev/sda5
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
remote-fs.target loaded active active Remote File Systems
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
102 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
uname -a
Linux localhost 3.13.8-1-ARCH #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014 x86_64 GNU/Linux

I cannot use wifi

Similar Messages

Maybe you are looking for