I cannot wrap around object shape in CS6. The object is a circle.

I have made a circle in inDesign CS6 and need to wrap around the circle. But "wrap around an object" treats it like a boundary box. What is the problem?

Try restarting ID and start a new document. Draw a text frame, fill it with placeholder text. Draw a circle. Click the wrap button indicated in the screen shot. Does it now work?
You may need to reset your preferences.
http://forums.adobe.com/thread/526990
If that fixes it for new documents but not your working document, it may be corrupted.
http://forums.adobe.com/thread/526991
Mike

Similar Messages

REP-1070 Object not found in the object store ...

When trying to open an report file (.rdf) in Reports 6 it won't open. I get the error REP-1070 Error while saving or opening ... Object not found in the object store.
I know that in the report there is an OLE object, is that the problem? How can I save the source code when I can't open the file?
Please help!
/Linda

Hi vdha,
Try this..
Get the user account under which the host instance for the send port is configured.
Log-off from your server. Log back in using the service account. The account which is been used in the host instance.
Go to MMC..Select “My User Account” as opposed to “Computer account” as you did.
The import the certificate under “Personal “ folder and “Trusted Root Certification Authorities ”
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Object referred to by the object key, does not exist

I am trying to create a transport request for an Item Catagory & get the following error message :
Object R3TR TABU TVAPT, referred to by the object key, does not exist
Message no. TR600
Diagnosis
    The object keys of the request/task cannot be edited because the object R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request.
System Response
    The function terminates.
Procedure
    If the error occurs in an application transaction, extend the missing object entry in the Transport organizer (SE09). If the error occurs again, contact the application hotline.

Hi Nitin,
Please check this SAP Note <b>90799</b>.
Perhaps it will help.
Regards,
Ferry Lianto

OBJECT SKIPPED while transporting the objects from DEV to QA.

Hi All,
While transporting the objects to Quality, I'm getting a warning saying Objects are skipped.
Can anyone please explain how to get rid of this error? We are facing this issue almost for all the transports which we are moving and the objects do not get transported to the next environment. We have to ask BASIS to use overwrite functionality while transporting to fix this each and every time we face an error.
If any SAP notes are available then please share it to me.
Thanks in Advance.

Hi Srikanth,
Objects of the selected object types exist in your system as changeable even if this system is globally set to not changeable. As a result, these objects are no longer connected to the transport system.
check here........
http://help.sap.com/saphelp_nw04/helpdata/en/0e/a7343e8c7f6329e10000000a114084/content.htm
for this try contact basis team.
Thanks,
Vijay.

How to specify character style to anchored objects markers depending on the objects formats?

I have a long document contains much of anchored text frames with custom positions and want to delete them by aplying character styles to their markers.

Create a new character style to apply it. And change the character style name in this code to yours, then execute it.
main ();
function main (){
    app.findGrepPreferences = NothingEnum.NOTHING;
    app.findGrepPreferences.findWhat = "~a";
    var objectsArray = app.activeDocument.findGrep();
    for (var c = 0; c < objectsArray.length; c++) {
        if (objectsArray[c].textFrames.length > 0) //The anchored object is a text frame
            var targetTextFrame = objectsArray[c].textFrames.item(0);
            var textFramePosition = targetTextFrame.anchoredObjectSettings.anchoredPosition;
            if (textFramePosition == AnchorPosition.ANCHORED) // the object have custom position
                //Create a new charater style and change the character style name to yours.
                objectsArray[c].appliedCharacterStyle = app.activeDocument.characterStyles.itemByName("Delete");
Then make a GREP search for this character style, and if you want delete them all by Change All button.

Object Visualization and accessing the object's attributes

Hi all,
I am trying to configure SWFVISU to allow us to call an ABAP Web Dynpro which displays an adhoc object attached to a workflow in the UWL.
I've had success with a business object of a task which is not an adhoc object by binding an attribute to the task container and creating a custom attribute in the UWL. However this is not possible with Adhoc Objects as there could be 0..n objects at runtime.
I've seen plenty of threads that refer to using ${item.externalObjectId} as part of the visualization parameters, ie in Visualization Parameters:
APPLICATION     FMCA_WDY_FPF
DYNPARAM                          WDCONFIGURATIONID=FMCA_WDY_FPF_CONF&RETURN_ID=${item.externalObjectId}
NAMESPACE                          sap
SYSTEM_ALIAS     SAP_ERP_Public_Sector
however in this case the attribute we need access to is an attribute to the Object Class, not the Work Item.
Is there any other variable substitution we can use in the Object Visualization to reference an attribute of the Object Class itself?
Thanks in advance
Alex

Hi,
Please visit the below link. This might help you.
http://weblogs.sdn.sap.com/cs/blank/view/wlg/20379
Thanks and regards,
SNJY

Increase distance between objects w/o resizing the objects

Is it posible to increase distance between objects in illustrator cs3 without resizing the individual objects?
For example, I have a series of circles separated from one another by about 20 pixels, aligned into a grid-like formation. I would like to increase or decrease the distance of the circles from one another, without changing the size of the circles themselves.
Thanks,
Regina

As Chris said, use the Distribute functions of the Align Palette. Assume a 5 x 5 array of circles separated by 20 points in each direction. You now want the array spacing to be 30 points.
1. Black Pointer: drag a marquee selection across the top row of 5. Then click once on the leftmost one.
2. Align Palette: Show Options. In the distance field of the Distribute area, enter 30. Click the Distribute Horiizontally button.
3. Select and group each of the other four rows.
4. Select the four rows and one of the top row's circles. Click once again on the selected top row circle.
5. Align Palette: Make sure the 30 value is still there. Click the Distribute Vertically button.
JET

Interactive form as Callable object error on testing the object.

Hello experts,
I am trying to use a adobe interactive form as a callable object in guided procedure and when I do the testing the error I am getting is:
"Callable object implementation did not return output parameters"
Result: Technical exception
Details: Service call exception; nested exception is:
java.net.UnknownHostException: pwdf3102: Service call exception; nested exception is:
java.net.UnknownHostException: pwdf3102: Service call exception; nested exception is:
java.net.UnknownHostException: pwdf3102
I did check all the configuration setting and everything seems to be all right.
Appreciate any suggestions.
Muthu Sundarresan.

There should be default entry like
127.0.0.1 localhost.
Make an entry below that with your ip address and the hostname. Reward some points pls.

How can I shoot & Edit a SloMo video like "Wrapped Around Your Finger"?

I have the Canon 7D and I would like to do a slow motion video like the song "Wrapped Around Your Finger" by the band Police.
I'd like to have the song play in RealTime and video play in Slow Motion.
How can I do this?
Can someone guide me with the workflow?
Many thanks in advance,

The whole trick to Wrapped Around Your Finger is that the band performed at a faster speed, then slowed everything down in post-production. So, with a 7D, you could shoot at 60 FPS while performing the song (and by performing, I mean lip-sync, obviously) at 200% speed. Then slow the footage down to 30FPS and the music will sync at regular (100%) speed.
Message was edited by: Eric Bolt

Clob in Report layout - cannot wrap to next line

Dear all,
I am facing a problem that the field display on the report in Clob datatype cannot wrap to next line. In the data model, it is separately selected the clob text. In the report layout, for the field I have already set the Vertical Elasticity to "Variable" and Horizontal Elasticity to "Fixed". However, the report output always show the clob text in one line. Even I reduce the width of that field, the result is the clob text will display in one line up to the end of right margin but didn't wrap to next line.
I tried to store the clob text to the placeholder or create a user parameter to store the clob text and then display on the report. However, the result is still the same. I really don't know why....
Can anyone help? Thanks for advance.
Thank you.
Regards.

Many thanks! Worked perfectly!
I've just upgraded to DW CS3 from a much older version, and I'm rebuilding an old site that's completely frames-based, so using CSS to accomplish what I used to do in frames (and for older browsers) is a bit of a challenge. I appreciate the helpful tip!
Thanks again!

Lifetime of Object in the Object Cache on selects

On inserting an object (corresponding to user-defined SQL type), I can use a stack-allocated struct for the object and its indicator structure, and pass these addresses to OCIBindObject.
But on selecting an object (by value, not ref), the doc says one must let the OCI runtime allocate the object struct and its indicator struct in the Object Cache, and call OCIObjectFree when done with the object. But it's unclear whether one needs to free the object for each row of the result set processed, or only once all rows have been processed.
By looking at the cache-allocated addresses of the object/indicator structs, it looks like the same "instance" in the cache is re-used for every row (addresses remain the same for every row). This tends to indicate the same object is reused, as opposed to a new one being allocated. I added a single OCIObjectFree after processing all rows, and things look OK... (read no crash, no complain/error from OCI).
But I feel a little uneasy about this, because unlike in my case, when the object has secondary allocations associated to it (because the type contains strings, collections, or other objects members), if somehow I need to OCIObjectFree for each row, and I don't, then I'm leaking all the secondary storage from previous instances of the object.
Can someone please shed some light on the subject? I find the OCI doc often a little sketchy on these very important lifetime issues. I'd appreciate some advice from someone with Object-Relational aspects of OCI.
Thanks, --DD

when I have to select objects by value :
* I let oci allocate objects in the object fetch arrayI don't think we have a choice here in fact. At least the way I interpret the doc.
* I have different addresses for every entry in the array after the fetchBut even an array fetch is done is a loop. You fetch 10 rows at a time, and you get say 25, so you have 3 iterations / fetches.
Of course the 10 object entries of a given fetch are different, but is the address of the 6th object the same in the first, second, and third fetch?
* I call OCIObjectFree() for every entry of the
array.If I have retreived object based attributes
from the object, i call OCIObjectFree() on the
object attributes recursively.To made it easier to understand my question, please find below the pseudo-code of what I'm doing (all error checking and most boiler plate arguments OCI requires are omitted, to concentrate on the control flow and the calls made)
create type point_typ as object (
x binary_float, y binary_float, z binary_float
create table point_typ_tab (
id number, point point_typ
struct point_typ { // C-struct matching SQL User Type
    float x, y, z;
struct point_ind { // indicator structure for point_typ
    OCIInd self, x, y, z;
static void select_objects() {
    Environment env(OCI_OBJECT);
    env.connect(zusername, zpassword, zdatabase);
    OCIHandleAlloc(OCI_HTYPE_STMT);
    OCIStmtPrepare("SELECT id, point FROM point_typ_tab");
    ub4 id = 0; OCIDefine* define_id = 0;
    OCIDefineByPos(&define_id, 1, &id, sizeof(id), SQLT_UIN);
    OCIDefine* define_pt = 0;
    OCIDefineByPos(&define_pt, 2, 0, sizeof(point_typ), SQLT_NTY)
    OCIType* point_typ_tdo = 0;
    OCITypeByName("POINT_TYP", OCI_DURATION_SESSION,
        OCI_TYPEGET_ALL, &point_typ_tdo);
    point_typ* p_pt = 0;     ub4 pt_size = 0;
    point_ind* p_pt_ind = 0; ub4 pt_ind_size = (ub4)sizeof(point_ind);
    OCIDefineObject(define_pt, point_typ_tdo,
        (void**)&p_pt, &pt_size, (void**)&p_pt_ind, &pt_ind_size);
    sword rc = OCIStmtExecute(0/*row*/);
    while (OCIStmtFetch2((ub4)1/*row*/, OCI_FETCH_NEXT) has data) {
        if (p_pt_ind->self == OCI_IND_NOTNULL) {
            // Use p_pt. Value of p_pt same for all iteration
    OCIObjectFree(p_pt);
    OCIHandleFree(OCI_HTYPE_STMT);
}As you can see, I do a single OCIObjectFree after the loop, and as mentioned previously, p_pt's value (a point_typ address) remains identical during the iteration, but the values in that memory chunk do change to reflect the various point instances (so each point instance overlays the previous one).
Are you saying I should be calling OCIObjectFree(p_pt); inside the loop itself?
And if so, should I call OCIObjectFree(p_pt); even if the indicator tells me the point is atomically null?
That what I do in OCILIB, and it doesn't seem to leak.Reading your post, I'm unsure you free of points in the array after the loop, or inside the loop. I hope the pseudo-code I posted above help to clarify my question.
BTW, OCCI is just a wrapper around OCI. Because OCCI
first releases were buggy (it's getting better) and
just few compilers (and compilers versions) are
supported, OCI remains a portable and workable
solution for dealing with Oracle ObjectsAs I wrote in a separate reply in this thread, I also agree OCI is the way to go, for various reasons.
Thanks for the post. I'd appreciate if you could confirm or not whether what I'm doing is consistent with what you are doing in OCILIB, now that I'm hopefully made my question clearer.
Thanks, --DD

Microsoft RMS Add-in Operation is not valid due to the current state of the object

Microsoft Rights Management sharing application for Windows
Microsoft Windows 7/Office 2010 Service Pack 2
Click 'Share Protected'
Receive the following error message 'Microsoft RMS Add-in Operation is not valid due to the current state of the object'
Microsoft Windows 7/Office 2013 Service Pack 1
Works fine
Any ideas why this is not working?

Hi lra,
As per my understanding, I think this issue can be caused by MaxHttpCollectionKeys settings in report manager web.config file.
For more details, please refer this similar thread to override the default value of MaxHttpCollectionKeys:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cb6ede72-6ed1-4379-9d3c-847c11b75b32/report-manager-operation-cannot-run-due-to-current-state-of-the-object?forum=sqlreportingservices
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to see the object while moving on the artboard?

hello everyone;
maybe a silly question; how to see the object while moving on the artboard? i dont wanna see only the objects bounding box(outline of the object). i wanna see the object it self. thank you.

What have they gone and messed up now?
When I drag an object (with bounding boxes turned on), the object moves and the bounding box stays still until I stop dragging, upon which it snaps to the object’s new position.
If I don’t have bounding boxes turned on (as I usually work), the object moves when dragged.
If what Bedri says is right, they’ve gone and mended something that wasn’t busted.

Why after I add a object to a list, the whole list changes?

I tried to call the add method of ClientList from a jsp webpage,
by looking at the log file, i found that for the 2nd time insert an Object into clientlist (say
client 1 is: IPAddress= 167.30.22.33
client 2 is IPAddress=167.30.22.44), what i get from the system log is that I have two
167.30.22.44 in the list, the first one is gone,
after I add the third item, the list just contains three identical third item, the former two are gone,
What 's wrong with my code? From the system log, I know that the parameters passed to the method clientlist.add are correct.
thank you.
My code is like this :
public class ClientList {
ArrayList<Client> listitems = null;
int numberOfItems = 0;
public ClientList()
          items = new HashMap<String, ClientListItem>();
          listitems = new ArrayList<Client>();
public synchronized void add(
Client cl) {
if (items.containsKey(cl.getIPAddress())) {
               ClientListItem clitem = (ClientListItem)items.get(cl.getIPAddress());
               clitem.incrementQuantity();
} else {
               System.out.println("clist.add called: " + cl.getIPAddress() + "\n");
               ClientListItem newItem = new ClientListItem(cl);
               items.put(cl.getIPAddress(), newItem);
               listitems.add(cl);
               for (Iterator i = listitems.iterator(); i.hasNext(); )
                    Client clt = (Client)(i.next());
                    System.out.println("after adding : " + clt.getIPAddress() + "\n");
}

I'm willing to bet that what is happening here goes as follows:
// Step 1: Create a client 1 object
// Step 2: Call add with this client object creating a string key with a client value
// Step 3: redefine the data in the first client object with the data for the second
             // In this step you probably did not create anew client object, but simply
             // changed the data in the original
// Step 4: Call add with the "redefined" client object comparing the string key with
             // some data from the client, determining it is not in the list adding it againWhat the above does (if this is the way you are doing it) simply places the same client
object into the hash twice with two different keys. And in step 3, by changing the original object,
you also changed the object already in the hash, because as already said, they are the same object.
Edit: And nevermind, jverd already said this. ;-)

Microsoft Access will not Sync to SharePoint - Publish Failed: The Object Could not be Committed to the Server

I created a very simple Microsoft Access database with one table and one form. When I published it to SharePoint, everythng worked fine. It published succesfully and there were no errors. I continued to make enhancements to the database and when I attempted
to sync to SharePoint, I got a message that the operation failed. I clicked OK and the issues table noted the following:
Move to SharePoint Site Issues
Issue
Reason
Object Type
Object Name
Field Name
The object could not be committed to the server.
Table
Vendor Location Information
The object could not be committed to the server.
Form
Add a New Vendor
The object could not be committed to the server.
Navigation Pane
Navigation Pane
The object could not be committed to the server.
VBA Properties
VBA References
The object could not be committed to the server.
Database Properties
DBProps
An error occurred while recording the local application status. Please re-synchronize with the Web application. No current record.
<tfoot></tfoot>
I thought this was weird so I downloaded the Assets database from Microsoft to determine if it was my database or something else. After it was downloaded and saved to my computer, I attempted to publish it to SharePoint and I got the same error.
What is weird, though, is that if I use the assets web database template in SharePoint (the one that is preloaded), it works fine. Once I open that database it in Access though and click sync, I get the same error message.
Does anyone know why this is happening?

I tried it again this morning creating a completely new table / form and this is the error I get:
Move to SharePoint Site Issues
Issue
Reason
Object Type
Object Name
Field Name
The object could not be committed to the server.
Table
VLI
The object could not be committed to the server.
Form
ANV
The object could not be committed to the server.
Navigation Pane
Navigation Pane
The object could not be committed to the server.
VBA Properties
VBA References
The object could not be committed to the server.
Database Properties
DBProps
An error occurred while recording the local application status. Please re-synchronize with the Web application. No current record.
<tfoot></tfoot>

I cannot wrap around object shape in CS6. The object is a circle.

Similar Messages

Maybe you are looking for