I cant click on anything in the first inch below the task bar, what can I do?

The Yahoo! Toolbar extension has been reported to cause this issue.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

Firefox will not let me contect to anything in the first inch of the page.

If I use Firefox, I can not connect to any item in the top inch of the page. But if I just connect to the internet with internet explorer, I have no problem and can connect to anything on the page. Its bad because most of the pages have the main things at the top. It does not matter if the page is full size or smaller.
I have deleted it and tried to reload it and that has not helped.
I like using firefox, but I can not with this problem.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

It goes to sleep, when I open it I cant click on anything.

When I close the lid or the macbook goes to sleep, when I open it I cant click on anything. The mouse moves but it doesnt let me close windows or do anything else either. I forced the programs to shut with cmd+alt+esc and it did let me to click on few things,however after the screen went to sleep again it did the same.Just didnt let me click on things.
Ive tried shutting the computer and rebooting it,even forced to it reboot itself and when it gets back the problem is still there.
My hardrive is fine,i run the cheks and I have 1/5 of the hardrive still in use.
However going over the activity (warning) log the following messages appeared during those freezes:
5.2.2013 19.10.57,756 System Preferences[225]: **** ERROR: *** -[ESGraphicsOptionsController _coreGetGraphicsStateForSelector:]: AGCGetMuxState() failed
Whats wrong? What can I do?

Hi Icemanjohn53,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides troubleshooting tips that can help you resolve the display issue with your iPhone 5.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If your screen is too dim, too bright, or you see only faint images
Try to adjust the brightness. If the screen doesn’t respond when you adjust the brightness, open several apps to make sure it’s not an issue with only one app.
If you have a screen protector, try removing it. Try removing your case if it includes a screen protector.
If you see the issue in multiple apps, restart your device.
If restarting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Cheers,
-Jason

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
How do I get version 4 to do this?
Thanks.

The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
1) type in longer strings that narrow the search
2) use an add-on to search just the beginnings:
https://support.mozilla.org/en-US/questions/1037469
3) install an older version of TB:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order.

Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order. This onloy seems to happen when I double-click on the song to play it in itunes. If I just hit play, this doesnt happen. As a result, I have several albums now in which the songs are in the wrong order. Its very frustrating, as this error then transfers over to my ipod every time I sync it. When I choose the info. for the songs, it has them correctly listed (i.e., it lists the songs as being #1 of 19 on the CD, for example). But then the song will have placed by Itunes as #5 of 19 for whatever reason. Itunes does not do this every time, but does it with enough frequency to be maddening. Any thoughts?

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

.. If the app is – in or out of background - (if in background NOT the first app) and the device locked – when you get a push message and DO NOT response straight away. Later unlock, click the app icon (which will have a badge on it) and it fails.

.. If the app is – in or out of background - (if in background NOT the first app) and the device locked – when you get a push message and DO NOT response straight away. let it fade off then, Later unlock, click the app icon (which will have a badge on it) and it fails to pop up my internal alert box and my notification message is gone(cannot get access to it in code).. other times it works . Including if you tap the messaeg from app centre. (this is all on a iPod 5.1.1).
Here is someone else with same problem http://stackoverflow.com/questions/7080266/receive-remote-notification-when-ios- device-is-locked-and-im-not-responding-imm

Tell Apple
Apple - iTunes - Feedback

When I right click and select open link in new tab, it leaves the page I am on and takes me to the first tab to the right

I usually have many tabs open when I read the news, and it is nice to select open links in new tabs while scrolling through a news' home page. Lately, however, Mozilla has been opening the new tab, but switches the page I am viewing to the first tab to the right of the home page. For example, I had ESPN.com open, and then a few Facebook tabs after that to the right. Whenever I would select open link in new tab, the tab I was viewing would switch from ESPN.com to the first Facebook tab to the right, and the new tab would open a little further down the line. Any chance anyone knows how to fix this?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Mouse doest click or recognize the first inch from below the toolbox down

'''the mouse doesnt recognize that space, from below the toolbar to an inch dow'''n... ive tried going to different sites but it still doesnt work. but when i use google, i works, but i choose firefox. please help me solve ths problem,,, even the scroll bar wont work when its at its highest.i cant even sign out because its at the 1st inch of the web screen. thank you

Top of Firefox window non-responsive, toolbars non responsive -- also see [http://kb.mozillazine.org/Problematic_extensions Problematic extensions]
*caused by Yahoo Toolbar -- https://support.mozilla.com/questions/890908
*caused by Babylon Toolbar -- https://support.mozilla.com/questions/890670

Hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

Yes because that information is not located on the hard-drive of your new mac! If it is purchased content from the store, than this issue isn't as bad as it looks!
Here is a link explaining how to get your previously purchased content back:
http://support.apple.com/kb/HT2519
You also want to authorize your Apple ID account on the computer by following these instructions as well:
http://support.apple.com/kb/PH1730
Basically this link explains to go to the top left corner of your screen where you will see file, edit, view etc! Click on Store in that section and click on authorize this computer, also you want to make sure that the computer will not automatically sync by going to iTunes in the top left corner, just to the right of the apple symbol if iTunes is selected, and go to prefrences, and here you will see back up! Right under the back-ups has an option explaining to prevent devices from automatically syncing which is good cause you may be able to transfer your purchases from there which will put your content into the computer, and if that happens than we don't lose anything
Hopefully I was of some help:)

Changing the first day-of-the-week on the MyTimesheets app

IN the SAP ECC and Portal implementations of the timesheet app, we were recently able to change the display so the first day of the week is listed as Monday, rather than Sunday. I would like to do the same thing with Fiori.
That is, when the app starts up the first view a calendar view of the whole month. If a person wants to enter time manually, they click the button labeled "manual" and a data entry screen pops up. The first day of the week listed across the top is Sunday, which does not reflect our settings in ECC. We need the 1st day of the week to be Monday.
Is there a configuration change we can make to force the 1st day of the week to be Monday, as it is in ECC?
thanks for your help!
-Rob Solomon

Hi Rob,
Are you using Wave2 app? You could change the setting for first day of the week in CAC1 and Fiori Timesheet app will adjust te calendar accordingly.
Nothing needs to be done for Fiori app.
Please update UIX01HCM to SP03 if you are using Wave2 app?
Best Regards
Pankaj

Moving a GregorianCalendar to the first day of the week

I'm using a GregorianCalendar class in order to get the time stamp for the nearest Sunday's date.
here's what I'm trying to do:
1. get a timeStamp and set it into a date
Date startDate = new Date(startTime);2. create a new GregorianCalendar using the above date as the start time.
GregorianCalendar calendar = new GregorianCalendar((startDate.getYear()+1900),startDate.getMonth(),startDate.getDate());3. the tricky part: make sure the calnedar's date is set to Sunday, if the current date is on any day other then Sunday, I will have to move it back to the nearest Sunday. I'm trying to do this by using:
calendar.set(Calendar.DAY_OF_WEEK, 0); for some reason this does not work...
am I doing anything wrong here?

thanks for that info but the problem is still there. here's some more input:
//creating the date, the ts here is 1153858800000 which is the dated in 7/25/2006
Date startDate = new Date(startTime);
//creating the new calendar
GregorianCalendar calendar = new GregorianCalendar((startDate.getYear()+1900),startDate.getMonth(),startDate.getDate());
//setting the calendar to the first hour (not sure it necessary)
calendar.set(Calendar.HOUR, 1);
//setting the calendar to the first day of the week
calendar.set(Calendar.DAY_OF_WEEK, 1);
//this returns 1153778400000 which is still dated 7/25/2006 whic is a Tuesday I would expect it to returns a different date
calendar.getTimeInMillis()

When downloading a file, only the first word of the attached file is included in the 'file name' field, not the entire file name, as it used to.

Regardless of filetype, only the first word of the file is filled into the "Enter name of file to save to..." dialog box. I'm set up to 'save file' in the FF Options > Applications tab for the basic MS and Adobe files. To successfully use/find the downloaded file, I type in the remainder of the file name. Have I overlooked an additional setting? Running FF 18.0 on a Win7 PC.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is that the server sends a wrong response header.
The server may not comply to RFC 5987 and sends a wrong Content-Disposition:attachment; filename header.
* https://developer.mozilla.org/en/Firefox_8_for_developers#Network

The detailRegion is always forced to populate the first record from the Master region

Hi fellow Spry enthusiasts,
My question is in regards the undesirable data population of
the regiondetail on initial load. I have 2 sections, one which is
my master region (which goes out and retrieves a bunch of records),
and a related detailregion which reacts based on the master.
However, every time I initiate a query of the master region to
retrieve records, the detail region also responds and automatically
grabs the FIRST record of the master region (which is undesirable
in my case because I do not want the detail region to react UNTIL I
select a record in the master region). Let me know if this makes
sense.
Psuedo Code:
var moveRequestor = new
Spry.Data.XMLDataSet("cfc/QueryThatReturnsABunchOfEmployeeRecords")>
<span spry:region="moveRequestor">
{EM_ID}
{NAME}
<span spry:detailregion="moveRequestor">
{EM_ID}
{NAME}
{PHONE}

This question was posted a while ago, and was one of the
search results that came up when I was looking for my own answer. I
had a nearly identical question and answered it here:
Disabling
default linked region and detailregiondisply until click
Hopefully it will help others too!

Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.

Auto-Capitalization: How can I set Pages v5.01 to auto-capitalize the first letter of the first word in a sentence and to automatically change lower case "i" to "I" appropriately. I'm unable to find a menu that offers me these.

Gavin Lawrie wrote:
Once it had been established that the iWork rewrite had resulted in some features being lost and others broken, and once Apple had acknowledged the concerns* and suggested they are working on fixes**, I'm not sure what else there is to achieve.
You are writing that in the perspective of having read about it here already. Repeated often enough that you encountered it somewhere in the posts.
Users are flooding in here and don't know any of this. Of course we have to repeat everything endlessly.
Because I like to give precise, understandable and workable answers to repeated questions, and Apple doesn't allow sticky posts here, I created a separate forum which users can consult to look up real answers, and contribute for themselves if they have something valuable to add:
http://www.freeforum101.com/iworktipsntrick/
There is a section purely devoted to Pages 5. Add whatever answers you feel will lighten the problems of Apple's 'upgrades'.
Peter
* Where have they acknowledged anything?
** They have barely anything listed, compared to the massive list of deleted features, and nothing but an extraordinarily long time frame considering they created the problems here and now. Apple has not said they will do anything at all about fixing the real issues, the biggest of which is that the new iWork apps break virtually all the work of existing users.

Update a record is updating the first record in the DB...HELP!

I am going over and over this again and cant find the problem.
i have a form that sends email to emails that are on a php mysql db however when i update certain records it always is updating the first record in the DB...i have looked over this so many times and cant see what is going wrong
the userid is not auto_increment but is based on the username (these are all unique)
i have uncluded the code to see if i am missing something
<?php require_once('../Connections/hostprop.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
$updateSQL = sprintf("UPDATE plus_signup SET email=%s, emailerSubject=%s, emailerContent=%s WHERE userid=%s",
                       GetSQLValueString($_POST['email'], "text"),
                       GetSQLValueString($_POST['emailerSubject'], "text"),
                       GetSQLValueString($_POST['emailerContent'], "text"),
                       GetSQLValueString($_POST['userid'], "text"));
mysql_select_db($database_hostprop, $hostprop);
$Result1 = mysql_query($updateSQL, $hostprop) or die(mysql_error());
      // Email Guarantor
          $to = $_POST['email'];
          $subject = "Email From Host Student Property";
          $message = "
          <html>
                    <head>
                              <title>Dear ".GetSQLValueString($_POST['userid'], "text")."</title>
                    </head>
                    <body>
                              <img src=\"http://www.hoststudent.co.uk/beta/images/hostlogo.gif\" alt=\"www.HostStudent.co.uk\" />
                              <h2>An Email From Host Students</h2>
                              <br /><br />
                              <table>
                                        <tr>
                                                  <td>Email Subject:</td>
                                        </tr>
                                        <tr>
                                                  <td>".GetSQLValueString($_POST['emailerSubject'], "text")."</td>
                                        </tr>
                                        <tr>
                                                  <td>Email Content</td>
                                        </tr>
                                        <tr>
                                                  <td>".GetSQLValueString($_POST['emailerContent'], "text")."</td>
                                        </tr>
                              </table>
                    </body>
          </html>
          // Always set content-type when sending HTML email
          $headers = "MIME-Version: 1.0" . "\r\n";
          $headers .= "Content-type:text/html;charset=iso-8859-1" . "\r\n";
          $headers .= 'From: HostStudent.co.uk <[email protected]>' . "\r\n";
          $send = mail($to,$subject,$message,$headers);
$updateGoTo = "TenantEmailSent.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
    $updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
mysql_select_db($database_hostprop, $hostprop);
$query_Recordset1 = "SELECT userid, email, emailerSubject, emailerContent FROM plus_signup";
$Recordset1 = mysql_query($query_Recordset1, $hostprop) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
?>
<?
          session_start();
          if(!$_SESSION['loggedIn']) // If the user IS NOT logged in, forward them back to the login page
                    header("location:Login.html");
?>
   <script type="text/javascript">
function loadFields(Value) {
         var Guarantor = Value.split("|");
          var userid1 = Guarantor[0] ;
                      var GuName = Guarantor[1];
          var GuPhoneEmail = Guarantor[2] ;
          document.getElementById('userid1').value=userid1;
                      document.getElementById('GuName').value=GuName;
          document.getElementById('GuPhoneEmail').value=GuPhoneEmail;
</script>
<form action="<?php echo $editFormAction; ?>" method="post" name="form2" id="form2">
              <table align="center">
      <tr valign="baseline">
        <td nowrap="nowrap" align="right"> </td>
        <td><select name="userid" id="userid" onchange="loadFields(this.value)">
          <option value="Select Guarantor">Select Guarantor</option>
          <?php
do {
?>
<option value="<?php echo $row_Recordset1['userid'] . '|' . $row_Recordset1['GuName'] . '|' . $row_Recordset1['GuPhoneEmail'];?>"><?php echo $row_Recordset1['userid'] . " , " . $row_Recordset1['GuName'] . " , " . $row_Recordset1['GuPhoneEmail']; ?></option>
          <?php
} while ($row_Recordset1 = mysql_fetch_assoc($Recordset1));
$rows = mysql_num_rows($Recordset1);
if($rows > 0) {
      mysql_data_seek($Recordset1, 0);
            $row_Recordset1 = mysql_fetch_assoc($Recordset1);
?>
        </select></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">Tenant Name</td>
        <td><input type="text" name="userid1" id="userid1" readonly="readonly" value="<?php echo htmlentities($row_Recordset1['userid'], ENT_COMPAT, 'utf-8'); ?>" size="32" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">GuName:</td>
        <td><input type="text" name="GuName" id="GuName" readonly="readonly" value="<?php echo htmlentities($row_Recordset1['GuName'], ENT_COMPAT, 'utf-8'); ?>" size="32" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">GuPhoneEmail:</td>
        <td><input type="text" name="GuPhoneEmail" id="GuPhoneEmail" readonly="readonly" value="<?php echo htmlentities($row_Recordset1['GuPhoneEmail'], ENT_COMPAT, 'utf-8'); ?>" size="32" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">GuEmailerSubject:</td>
        <td><input type="text" name="GuEmailerSubject" value="" size="32" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">GuEmailerContent:</td>
        <td><textarea name="GuEmailerContent" cols="45" rows="5"> </textarea></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right"> </td>
        <td><input type="submit" value="Send email" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right"></td>
        <td> </td>
      </tr>
              </table>
    <input type="hidden" name="MM_update" value="form2" />
    <input type="hidden" name="userid" value="<?php echo $row_Recordset1['userid']; ?>" />
</form>

i have found the problem, there were two forms with the same name..
thanks

I cant click on anything in the first inch below the task bar, what can I do?

Similar Messages

Maybe you are looking for