I cant connect to any VPN connection

i cant connect to any VPN connection . How i can fix this problem .

You are welcome.
Issues with the "Shared secret" setting have been reported sporadically, such as in the post above. That seems to be the only potential issue I am aware of.
In any case, it is worth double-checking all of your VPN settings against what the server is asking for. Probably you have done this already.
charlie

Similar Messages

Firefox cannot load websites when connect/disconnect from any VPN connection

I am consistently uses OpenVPN and RamsesVPN connectivity. But whenever i switch between the VPN connectivity or connect into any VPN or disconnects existing VPN connectivity. My Firefox Browser is unable to load new webpages/Refresh existing open TABS.
In order to restore, i have to restart my Browser each time, whereas i am not facing this problem with Chrome.
I am running with Windows 7 Enterprise edition, and latest Firefox version.
Is there any method to avoid these restarts ?

Hi, this bug is old, but it has useful info for VPNs
See for reference Bug 702111
And there are built in features on the about:config file that you can tweak the number of connections and allowing pipe lining: [http://support.vpnsecure.me/articles/ssh-tunnelling-proxy-troubleshooting/tweaking-firefox-for-best-performance-security Third party information on these connections]
Other suggestions I have seen are to add bookmarks while logged into either vpn. (For example, bookmark the frequent sites you use in either vpn in separate folders)
In Firebug, when you connect or refresh the page when moving from one VPN to the other, do you see a termination in the connection to the first vpn?

HT5569 I am unable to get my iPhone 4S to connect to any wifi connection, I have reset my phone as well as visitedn my cellular provider without success. Does anyone know how I could possibly get my phone to connect to wifi?

I am unable to get my iPhone 4S to connect to any wifi connection, I have reset my phone as well as visitedn my cellular provider without success. Does anyone know how I could possibly get my phone to connect to wifi?

Thanks for the responses, they have been very illuminating!
This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile.

HT4623 Please help me about my iphone5 after I upgraded it into iOS 7.0.4 I got the problem about my connections I can't really have a good connections to my server if I'm in my bedroom and I can't connect to any wifi connection not even searching

Please help me restor my system in my iphone5 Bcoz I got this problem that I can't connect to our wifi in our home after I upgraded this iOS7.0.4...totally very disturbing and frustrating even my outside I can't search any wifi connections ant my network service when I'm in home is very slow my Rogers network is only 1 bar so even I will open my Data I can't really connect so meaning no network connections when I'm in my Bedroom and No wifi connections too I can only possible got connections when I get near the Reuter of the wifi like now while I'm doing this report but in my bedroom totally nothing and not even connecting when I bring this to Rogers outlet where I bought this iPhone,I can't even search or connect in the store wifi itself...very disappointed this problem last 1week already please help me it never happen before just now after I upgrade that iOS7.0.4

Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

Macbook Pro can no longer connect to any wirless connection

My macbook pro has never had any problem connecting to a wireless connection up until recently. For the last two months, I have not been able to connect to any wireless signal although I can when connected directly to the router with a lan cable. these are all networks that I have used in the past, with all correct passwords or even to networks that are not password locked. do you have any ideas on what i can do about this before making the trip to the apple store?

i forgot to mention, its not even a matter of getting connected to the wireless signal with a few bars showing and not function, it just does not connect at all anymore and i get an error message saying:
"there was an error joining the network [the name of the network i am trying to connect to]"

I am working in Qatar and bought my ipodtouch for this reason. I cannot connect to any wifi connections. Is it my pod or is something else wrong?

I cannot connect to any wifi here in Qatar. Have i done something to my ipod or is it the area?

- What happens when you try to connect to a network? Messages such as incorrect password? Can not connect?
- Have you tried:
-- Resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-- Resetting network setting on the iPod: Settings>General>Reset>Reset Network Settings
-- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
-- Restoring your iPod, first from backup and if problem persist restore to factory defaults/new iPod.
- Can you see the networks? If not try:
Unable to use Wi-Fi or Bluetooth with iPhone or iPod touch because there's no address listed for the device

Puzzler... Cant access RRAS with VPN connected client

I have a series of 4 VMs running server 2012 r2;
dc- my domain and wsus server
rds- my remote desktop server for remoteapps, RRAS for connecting to VPN
sql- sql server for database needed for one of the apps published
av- hosts kaspersky and manages backups
So, I have a VPN set up through RRAS and am connecting with it and all is well. I can ping every computer on the network EXCEPT the rds server. I can ping from the rds server to the vpn client.
I am trying to use a remote app over the vpn but the remote app is unable to reach the rds server.
Does something have to be setup manually to loopback traffic to the rds server when it is coming in on the same server through RRAS?
Any insight would be appreciated!
Matt

Hi,
According to your description, my understanding is that rds installed RRAS and configured it as VPN server, VPN client successfully ping internal clients, but failed to ping the VPN server.
Are there 2 NICs on the VPN server? One connects to internal and another connects to external?
In general, a ping packet is sent by the client from its own IP address to the external IP address of VPN server, it will be unpacked once the VPN server receives it, and the VPN server will dispatch this pack due to the internal IP address. So, if this
packet is sent to the VPN server, when it unpack the packet and find it is sent to itself, the VPN server should reply to this packet.
You may try to turn off firewall/anti-virus software temporally, and then check to see if it can successfully ping. Besides, use a monitoring tool(Network Monitor, Wireshark ) to
capture packets on both client and VPN server, check to see if the packets are sent/answered to the correctly destination.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My 4th generation iPod touch (reset today) is unable to connect to any VPN systems. Does anyone know how to fix this? Thanks

Didn't realise there would be a question box as well as title and it would take ages to write out again, so...
Does anybody know what to do when an iPod refuses to connect to VPN?
Thanks

Thanks for the response,
I have tried 3 vpns so far, hotspot shield, spot flux and onavo extend.
All 3 can be downloaded and installed as I can surf the Internet fine.
The problem occurs when trying to install the profile to run the VPN. The certificate shows as authenticated so I add profile, and in the VPN settings tab I can see the current VPN profile, but swiping the VPN swiper to on results in a spinning wheel for a period and then it gives up and VPN returns to off.
For the record, hotspot shield works fine on my mac computer.

Lync 2013 client switches connection after a VPN connection

have read that if you are working remote, it's better to go through the Edge server instead of establishing a VPN connectionn first before starting Lync. Reason is VPN is encrypted and so is Lync traffic so the double encryption will tend to slow
things down. When I work remote, I fire up Lync first and make a connection to the Edge server. After that, I establish a VPN tunnel to work to access network drives etc....
In about 5-10 minutes, my Lync client disconnects and then immediately reconnects but this time its connecting directly to an internal FE over the VPN which is what I don't want. Any idea on how to keep this from happening? Its not causing a major problems
at this time but we are just doing IM right now. Once conferencing starts, it could be an issue.

Hi Shadowtuck,
Have a read through this guide on how to stop this from happening:
http://blogs.technet.com/b/nexthop/archive/2011/11/15/enabling-lync-media-to-bypass-a-vpn-tunnel.aspx
Basically, the overview of this is to:
Split tunnel the traffic, so the Lync traffic continues to flow via the Internet
Block the Lync traffic from going over the VPN
Configure DNS pinpoint entries so that when VPN'd in the Lync client resolves the external Edge IP addresses.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)

HT1695 my iPhone wont connect to any wifi connections

I have an iPhone 4S and anywhere I go and try to connect to the internet, if I type in the password it says "incorrect password". I have typed in the password correctly and it doesn't work at my house, work, or basically anywhere else. My brother has the same phone and it works at these places.

Hello Flair898,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
-Griff W.

My 5th generation ipod touch will not connect to any internet connection...

i've tried reseting the network settings, restoring the ipod, pressing the home and on/off button for ten seconds, is there anything else i can possibly do.. it will not connect to my home network or a hotspot i set up on my phone. i just got this ipod and it's already giving me trouble.

it sees the networks, it just has a continuous spinning circle thingy.. when i try to click on an app it says 'cannot connect to the itunes store'..

Dual Remote VPN Connection

Hello Guys
i created three different Remote VPN connections with three different networks . i can make them one but for some reasons i don't mix all.
and iam using Cisco asa 5505 with Shrew Soft VPN software , so my problem is
- i connected Shrew soft remote vpn , if i try to connected another remote vpn connection this will not accept the second connection , so please can any one give me a remote vpn connection software that accepts more than one connection

Hi,
Since you mention the ASA and the VPN I presume you are trying to connect by VPN Client to the same ASA?
Why would you want to have several VPN client connections at the same time? (Though I think that isnt even possible)
What are you trying to accomplish by these 3 different VPN Client configurations configured on the same ASA?
Isnt it just possible to configure one VPN Client connection to the ASA that would handle all the traffic of these 3 VPN Client connections?
- Jouni

Trying to set a delay in an Applescript for VPN connection

I need to be able to set some routes upon opening a particular VPN connection so I did some searching and found a really simple Applescript that does the job. Problem is it tries to set the routes before the VPN actually connects so the routes don't go in.
I added in a 10 second delay which does the trick, but I'm thinking there has to be a way to do this that waits until the VPN actually connects before continuing - so if it takes 5 seconds or 10 or whatever, it waits.
The other thing I'm doing that I think is bad is I'm sending a route delete command before sending the add command. Why? Because if I don't and for some reason the route is partially in the table, it doesn't give an error and ends up not routing. Again, probably a better way to do this.
Here is my current script"
-- Connect Work VPN
tell application "System Events"
tell current location of network preferences
set VPNservice to service "Work" -- name of the VPN service
if exists VPNservice then connect VPNservice
end tell
end tell
delay 10
set gateway to "x.x.x.x" -- omitted here for security
do shell script "route delete 192.168.25.0/24 " & gateway with administrator privileges
do shell script "route delete 192.168.20.0/24 " & gateway with administrator privileges
do shell script "route add 192.168.25.0/24 " & gateway with administrator privileges
do shell script "route add 192.168.20.0/24 " & gateway with administrator privileges
Any suggestions??
Thanks.

you might want to try asking in the Applescript forum under OS X technologies.
I don't have any VPN connections so can't test anything but applescript dictionary for system events indicates that configuration property of a service has a boolean property "connected". so just run a loop with, say, 1 second delay until this porperty becomes true. presumably it would be something along the lines
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
tell application "System Events"
tell current location of network preferences
set VPNservice to service "Work" -- name of the VPN service
if exists VPNservice then connect VPNservice
repeat until (connected of current configuration of VPNservice)
delay 1
end repeat
end tell
end tell
set gateway to "x.x.x.x" -- omitted here for security
do shell script "route delete 192.168.25.0/24 " & gateway with administrator privileges
do shell script "route delete 192.168.20.0/24 " & gateway with administrator privileges
do shell script "route add 192.168.25.0/24 " & gateway with administrator privileges
do shell script "route add 192.168.20.0/24 " & gateway with administrator privileges</pre>

Can't remove locked VPN Connections installed by HotSpot Shield

How can I remove locked VPN connections under Network? (OS 10.9.5)
HotSpot Shield installed three VPN connections under Network settings. I no longer subscribe to the service and have removed the application, but I'm unable to remove the network connections.
Three VPN connections were created:
"US Server"   utahmaps.us
"GB Server"   jacketmagazine.us
"JP Server"    brainphotos.us
However, all these connections have the padlocked icon beside them, and I don't have the permissions to delete them.
I'm including a screen capture of one of the settings, for reference.
I can set them to inactive, but would like to remove them altogether.
Can anyone offer any assistance?
Thanks

I have been looking for this answer also... I found it yesterday. if you go to profiles in system preferences, you will be able to delete those completely.

[SOLVED, kind of] VPN connection problems

Hi guys,
I'm having a problem connecting to a VPN in KF5:
Until a couple days ago, I was using KDE4, and there I was still able to connect to a VPN (I'm using IPVanish), although after connecting to any VPN I always had to run the command
# ip route add default dev tun0
for the NetworkManager to actually use the connection.
However, now with KF5, this doesn't seem to work anymore. All my VPN connections are listed in the applet, and connecting to any fo them also seems to work (it takes a few second, then the VPN connection is added to the "Active Connections" section), however, all my network traffic still goes through my "normal" connection. Running the above command after connecting to a VPN doesn't change anything.
Here is the log of NetworkManager, I can't spot anything unusual:
Mar 02 22:09:10 keineeile NetworkManager[420]: <info> Starting VPN service 'openvpn'...
Mar 02 22:09:10 keineeile NetworkManager[420]: <info> VPN service 'openvpn' started (org.freedesktop.NetworkManager.openvpn), PID 1454
Mar 02 22:09:10 keineeile NetworkManager[420]: <info> VPN service 'openvpn' appeared; activating connections
Mar 02 22:09:10 keineeile NetworkManager[420]: <info> VPN plugin state changed: starting (3)
Mar 02 22:09:10 keineeile NetworkManager[420]: nm-openvpn-Message: openvpn started with pid 1458
Mar 02 22:09:10 keineeile NetworkManager[420]: <info> VPN connection 'IPVanish - DE, Dresden' (Connect) reply received.
Mar 02 22:09:10 keineeile nm-openvpn[1458]: OpenVPN 2.3.6 x86_64-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Dec 2 2014
Mar 02 22:09:10 keineeile nm-openvpn[1458]: library versions: OpenSSL 1.0.2 22 Jan 2015, LZO 2.09
Mar 02 22:09:10 keineeile nm-openvpn[1458]: WARNING: No server certificate verification method has been enabled. See [url]http://openvpn.net/howto.html#mitm[/url] for more info.
Mar 02 22:09:10 keineeile nm-openvpn[1458]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 02 22:09:10 keineeile nm-openvpn[1458]: Attempting to establish TCP connection with [AF_INET]5.9.50.241:443 [nonblock]
Mar 02 22:09:11 keineeile nm-openvpn[1458]: TCP connection established with [AF_INET]5.9.50.241:443
Mar 02 22:09:11 keineeile nm-openvpn[1458]: TCPv4_CLIENT link local: [undef]
Mar 02 22:09:11 keineeile nm-openvpn[1458]: TCPv4_CLIENT link remote: [AF_INET]5.9.50.241:443
Mar 02 22:09:15 keineeile nm-openvpn[1458]: [drs-c01.ipvanish.com] Peer Connection Initiated with [AF_INET]5.9.50.241:443
Mar 02 22:09:17 keineeile nm-openvpn[1458]: TUN/TAP device tun0 opened
Mar 02 22:09:17 keineeile nm-openvpn[1458]: /usr/lib/networkmanager/nm-openvpn-service-openvpn-helper --tun -- tun0 1500 1572 172.20.25.230 255.255.252.0 init
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> (tun0): carrier is OFF
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> (tun0): new Tun device (driver: 'unknown' ifindex: 4)
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> (tun0): exported as /org/freedesktop/NetworkManager/Devices/3
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> VPN connection 'IPVanish - DE, Dresden' (IP Config Get) reply received.
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> VPN connection 'IPVanish - DE, Dresden' (IP4 Config Get) reply received.
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> VPN Gateway: 5.9.50.241
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Tunnel Device: tun0
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> IPv4 configuration:
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Internal Gateway: 172.20.24.1
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Internal Address: 172.20.25.230
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Internal Prefix: 22
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Internal Point-to-Point Address: 0.0.0.0
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Maximum Segment Size (MSS): 0
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Forbid Default Route: yes
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Internal DNS: 198.18.0.1
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> Internal DNS: 198.18.0.2
Mar 02 22:09:17 keineeile nm-openvpn[1458]: Initialization Sequence Completed
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> DNS Domain: '(none)'
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> No IPv6 configuration
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> (tun0): link connected
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> VPN connection 'IPVanish - DE, Dresden' (IP Config Get) complete.
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> VPN plugin state changed: started (4)
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> (tun0): device state change: unmanaged -> unavailable (reason 'connection-assumed') [10 20 41]
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> (tun0): device state change: unavailable -> disconnected (reason 'connection-assumed') [20 30 41]
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> (tun0): Activation: starting connection 'tun0'
Mar 02 22:09:17 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> Writing DNS information to /usr/bin/resolvconf
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 1 of 5 (Device Prepare) started...
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 2 of 5 (Device Configure) scheduled...
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 1 of 5 (Device Prepare) complete.
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 2 of 5 (Device Configure) starting...
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): device state change: prepare -> config (reason 'none') [40 50 0]
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 2 of 5 (Device Configure) successful.
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 3 of 5 (IP Configure Start) scheduled.
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 2 of 5 (Device Configure) complete.
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 3 of 5 (IP Configure Start) started...
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): device state change: config -> ip-config (reason 'none') [50 70 0]
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 3 of 5 (IP Configure Start) complete.
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 5 of 5 (IPv4 Commit) started...
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): Activation: Stage 5 of 5 (IPv4 Commit) complete.
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
Mar 02 22:09:18 keineeile NetworkManager[420]: <info> (tun0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Mar 02 22:09:19 keineeile NetworkManager[420]: <info> (tun0): Activation: successful, device activated.
My system:
$ uname -a
Linux keineeile 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
I'd be thankful for any hint or tip!
Edit:
Okay, I figure out a way to use VPN:
NetworkManager somehow appears to have some problems with OpenVPN. I tried to set up a connection using PPTP (both are offered by the provider), and it works right away without doing any additional work.
It's not really a solution to the above problems, but it solves the issue for me...
Last edited by keineeile (2015-03-04 18:10:30)

Try going to www.whatismyip.com whilst it works, then double check when it doesn't. Router might be having its 'heartbeat' and changing IP's. Going to a static might work, or using something like dyndns.
Also, find out whay port your VPN uses then to to www.canyouseeme.org to check you can be seen from the outside world, if not, then could be port forwarding issue.
Both of these are kind of unlikely seeing as it is a daily thing that happens at the same time, however they would be worth checking just to make sure.
Just my two cents

I cant connect to any VPN connection

Similar Messages

Maybe you are looking for