I cant connect to FMS/No puedo conectar

I can not connect to the Flash Media Server using the
management console. It's weird because i have done in other
computer and have worked. This time i installed Windows Server
2003, the installed Flash Media Server and when i open the console
y type
http://localhost in server address
field, login and password and when o click login button it doesn't
happen anything, it doesnt even show me an error message.
I do not know what to do, please if somebody could help i
would thanks a lot.
No he podido conectar el Flash Media Server. Ya lo he hecho
en otra PC, esta vez lo hice en una que le acabo de instalar
Windows Server, y el Flash Media Server. Cuando tipeo
http://localhost en la espacio de la
dirección el username y el password y le doy click a login, no
me pasa nada ni siquiera me sale algún mensaje de error.
Por favor si alguien puede ayudarme con esto. lo
agradecería mucho.

Hello, Anbrogh. 
Thank you for visiting Apple Support Communities.
I see you are experiencing an issue connecting to the iTunes Store.  I would recommend going through the articles I have attached below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

Similar Messages

  • Ya no puedo conectar mi ipad con el imac

    Ya no puedo conectar mi Ipad con mi imac ahora aparece un mensaje que nesecito restaurar los valores de fabrica ya lo hize y sigue apareciendo el mensaje

    Google translate:
    Greetings, I try to access my account from my ipad itunes store and get a diciento message can not connect to itunes store.
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • No puedo conectar iCloud desde Windows vista, me marca error de servidor. Que hago para poder acceder iCloud desde vista?

    No puedo conectar iCloud desde Windows vista, me marca error de servidor. Que hago para poder acceder iCloud desde vista?

    The neighbor discovery on mac and PCs is based on broadcast.
    I think it's the same for yoru SQL application.
    Broadcast are blocked by default on the controller. You can enable "broadcast forwarding" in the controller menu

  • Safari cant connect to a server.

    I have Safari Version 7.0.2 (9537.74.9)  Running on a powerbook  with   10.9.2
    message. when I open google, facebook or twitter...  "Safari cant connect to server."
    and firefox .. but I can open almost any other website. 
    This is the message I get in Firefox.
    Unable to connect
    Firefox can't establish a connection to the server at www.google.com.
        The site could be temporarily unavailable or too busy. Try again in a few moments.
        If you are unable to load any pages, check your computer's network connection.
        If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    Sometimes when I restart the computer it works for a few minutes then it gets blocked again...
    I have tried restarding the browsers, deleting the cookies and a few other stuff but nothing seems to be working..
    This is a new Mac ANd I havent installed many programms in it.   

    You, or someone using your computer, changed the network settings in an attempt to bypass copyright restrictions on Netflix. The illegal DNS server you're using should never have been trusted and now doesn't work. 
    Delete all the DNS servers by selecting them and clicking the minus-sign button at the bottom of the list. You may have to unlock the settings first by clicking the padlock icon in the lower left corner of the preference pane and entering your administrator login password when prompted.
    If the server addresses are grayed out and can't be deleted, even with the preference pane unlocked, then the change was made on your router. Refer to its documentation to find out how to reverse the change. The router should get its DNS settings automatically from the ISP.
    Click OK, then Apply. The DNS server list should be repopulated automatically with the address of your router, or the addresses of the DNS servers provided by your ISP. If that doesn't happen, open the TCP/IP tab of the preferences and click Renew DHCP Lease. If you're not using DHCP, manually enter the DNS server addresses you got from your ISP, or else use these temporarily:
    8.8.8.8
    8.8.4.4

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • What does this message mean:  this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

    what does this message mean:  this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

    FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
    http://support.apple.com/kb/HT1311

  • Cant connect my ios devices to my mac book air

    I cant connect my IOS devices (iphone 4s + ipad 2) to my macbook air mid/2013 by usb or bluetooth.
    when connecting by usb the devices dose not charge or sync with itunes. it charges for split a second and disconnect anther time and it go forever in the his loop.
    I tried using two cables.
    The devices are working on my windows pc.
    my macbook works with usb sticks and other android phones.
    note:
    -both devices are on ios 8.1
    -my macbook is on Yosemite
    -my ipad 2 worked well before updating  my mac to yosemite

    iPods that have the Window format should continue to work on a Mac, because Macs can read/write the Windows format used on iPods.  (The opposite is not true - Windows cannot read the Mac format.)
    You can change the formatting, by doing a Restore on the iPod, but that is done in iTunes, so iTunes needs to see the iPod when you connect it.  The Restore will also erase the iPod.
    Since it continues to work on your friends Windows PC, your iPod itself is probably OK, so you may want to first look at the connection to the Mac.
    Did you use the same USB docking cable when you connected it to your friend's PC?  If so, you can rule out the USB cable as the cause.  If not, it's possible that your USB cable is faulty.
    If you are connecting the iPod to a USB hub, try a direct connection to the Mac's USB port.  If other USB devices are connected at the same time, try disconnecting the other devices (except for standard keyboard and mouse if normally used).  You may also want to shut down (power off) the Mac, if you have not done so in a while.  Also, do this to Reset the iPod
    http://support.apple.com/kb/ht1320
    Start up the Mac, run iTunes, and connect the iPod by itself to a direct USB port.

  • I cant connect to WiFi on my iPod Touch 1G?

    I have had an iPod Touch 1G for quite some time now, but I recently upgraded the iOS firmware to 3.1.3, and I just noticed that I cant connect to wifi! Nothing is grayed out, but it cannot find any connections. Ive tried resetting my router and wifi settings, but that diddnt seem to work either.

    So it is not this problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Teh try:
    Does the iPod connect to other networks? (noit clear if you have access to more than one)
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Why my ipod touch 4th gen. cant connect to application store? it just keep on loading. ive done rebooting,hard reset. and restore my ipod can somebody help me please....

    i have an ipod touch 4th gen. it cant connect to itunes, apps store? ive tried rebooting, system restore, even erase all my apps.. can sombody help me please...

    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight
    Can't connect to the iTunes Store
    Does Safari work?
    Have you tried when connected to another network?
    have you restored to factory settings/new iPod?

  • Error message when trying to do an update on itunes and cant connect my iphone anymore

    My itunes says that i need to update it. So i click the update button but it comes up with a error message and wont update it but now i cant connect my iphone to my computer either. can someone please help me. i have restarted my phone and my computer and still nothing...

    your phone is in recovery mode, which means your data is already lost.  hopefuly you've been keeping regular backups

  • I just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

    i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

    Is the status light green?
    Your Airport device may be in Bridge Mode.
    Airport Utility 6:
    Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
    Airport Utility 5:
    Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right.

  • Cant connect wirelessly to internet after installing iphoto 9.2.1

    I recently upgraede my system to 10.6.8. Today I downloaded and installed iPhoto 9.2.1 (going from 6.0.6). Now I cant connect to the internet wirelessly. Ethernet works. Could these actions have something to do with causing this problem?

    Probsbly good to post in the OS forum along with the error message when it failes to connect
    Is this failure only from iPhoto or from all software on teh Mac?
    LN

  • How can i get my password if i cant connect to itunes

    so i changed my passcode to my i-pod because  my brother found out what it was and i know i put taylor gang (without spacing) as my passcode but i have big hands so when i put the passcode i must have pressed a wrong button because and now i cant get the passcode right no matter what happens. i also cant connect my i-pod to itunes because i haven't had a chance to update my itunes so i cant go and do it from there. so my question is what do i do ( if theres a way to do it without wiping my ipod that would be great thanks)
    help!!

    If you cannot remember the passcode, you will need to Restore the device...
    Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • I just updated my Iphone 4 to the IOS 6 update and now i cant connect my iphone to Itunes because apparently my itunes is out of date? and then when i try and update itunes it says i need a new OS completely is there anything i can do???

    I just updated my Iphone 4 to the IOS 6 update and now i cant connect my iphone to Itunes because apparently my itunes is out of date? and then when i try and update itunes it says i need a new OS completely is there anything i can do???

    Are you running Leopard on your Mac, Laurie?
    If so, try instead updating to iTunes 10.6.3.25. (That supports earlier models of iPhones running iOS 6, even though it can't run the new iPhone 5s.)
    A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
    iTunes 10.6.3

Maybe you are looking for

  • HT203175 Does anyone know why I get only 30 seconds of a show that is free instead of the 45 minutes that the show is on?

    I dowloaded Drop Dead diva free and started watching. Power went out after abount 5 minutes in the show. Came back on line and I went to show and know all I get is 30 seconds of the show. Is there away to uninstall the show and reinstall??

  • Comments Posting w/o scripting - Lost control over my JSP flow

    Hi all, Imagine you have a page where users can view comments from other users. And imagine that members can also post comments, but non-member guests can not. You want everyone to get the same page, but you want members to see more things on the pag

  • Error rendering portlet

    I have done a simple JPDK portlet in JDev:10.1.2 (pdkjava.jar version: 9.0.4.1.0) and deployed to a locale stand-alone OC4J. The I added the provider successfully to OracleAS Portal 9.0.4.(pdkjava.jar version: 9.0.4.0.0). If I try access the provider

  • Scroll wheel not working in Stickies

    I have a Mighty mouse and the scroll wheel does not work in stickies. My old mouse was a MacAlly and the scroll wheel worked in stickies. I have a few stickies that contain a lot of info that I refer to often. I go to the particular stickyand like to

  • Initial screen loading....

    Hello, I've just installed ZCM. I deployed the agent out to my laptop running Windows 7 Pro. From an XP laptop, I'm trying to do remote control to my Win7 laptop. I'm using the IP instead of the hostname since we don't run DDNS. I get the VNC looking