I cant connect to internet via network
My wifes iPhone 4S will not connect to safari via verizon network. I've tried google, etc.. Search wheel just keeps rotating but not response. It will connect via WiFi at home. But when in the car and she wants to get directions it won't connect. Is there something in settings I'm missing?
Thanks.
Greg
Hi Greg, you may find the following helpful:
Open the "Settings" app then press "General". Then proceed to "Network" and ensure that "Cellular Data" is toggled on. Try navigating to a website in Safari now. If this didn't work try going to "General" then "Reset". You will see a series of six options; select "Reset Network Settings". Try to visit a website once more. If you were unable to load the website try restarting the phone. If all else fails try bringing the phone to a genius bar at an Apple retail store for a diagnostic test.
Hope this helps
Similar Messages
-
Airport Express - cant connect to internet via PPPoE
Hi guys/girls,
I am having trouble getting internet access with my newly bought Airport Express 802.11n Wi-Fi. I was connected to the internet via an Arcor DSL-speed modem 200 (Arcor is my provider here in Germany), using the PPPoE protocol, and an Ethernet cable.
I have set up Airport Express (AX) to use PPPoE, and managed to get a connection to the internet for about 5 seconds (even up to 20 secs once - YAY!)... before the connection drops again. AX tries continuously to connect to the internet, as if it is stuck in a loop, but never manages to make the connection last. The trouble I am experiencing look very much similar to what is described on the threads below from about 2 years ago. There it is suggested that the Firmware could be the problem. Or is it my provider?
In German: http://www.macuser.de/forum/f15/arcor-speed-modem-178771/
In English: http://discussions.apple.com/thread.jspa?messageID=1481024
Since both posts are from 2 years ago, and I would have expected the problem to be solved. Apparently not. Any suggestions?
cheersYes - I was still old-school: plugging in my Ethernet DSL cable into my laptop every time, using PPPoE as that is what my internet provider requires.
I have now indeed attached AX to my DSL modem via the Ethernet cable. Following your suggestion,I set-up a network location where PPPoE is disabled. But unfortunately no effect... After 5-15 secs (even up to 35 secs this time!) i get the message that my Ethernet is unplugged. Which it obviously is not, and I even cant blame the cat for it!
Two problems keep being listed:
Ethernet unplugged
PPPoE server
Could the problem be with my internet provider? -
Hi everyone. I recently upgraded my Iphone 4S fromOS ver 5. to ver 6.0.1
Now if i connect to the internet via cellular data it does not work.
Before with the ver 5 everything was fine but with this upgrade things seem to be going wrong.
However the wi-fi connection is working very fine.
Someone to help solve the issue here...Define "doesn't work".
Any errors?
What has been tried so far? -
E6 cant connect to internet via usb cable
Hello,
My phone is Nokia E6. I've installed Nokia Suite (v: 3.6.36) on my pc.
I connect usb cable to E6 and pc. Run Nokia Suite. And then I connect my pc to internet. I expect E6 will connect too but it's just not working.
Can you help me on this?
Solved!
Go to Solution.@rebulanyum
Have you tried both via Bluetooth and USB connectivity as per this resource?http://www.nokia.com/hk-en/support/product/e6-00/troubleshooting/?qt=Modem&comp=nokiatroubleshooting...
Happy to have helped forum with a Support Ratio = 42.5 -
Solaris Newbie.. Cannot connect to Internet via network
PROBLEM: I have setup solaris 8 and everything installed properly. I can ping the machines locally but outside the local network
I have a linux server running dns and internet sharing gateway.
In sun, I have added the linux as the default router in /etc/defaultrouter
also added linux as the nameserver in /etc/resolv.conf and I have rebooted.
Still I cannot ping outside....anyone help?Well I solved the problem...
Basically, I had to add the following in nsswitch.conf file
hosts: files dns
Before, I only had files. -
Cant connect to internet via cellular
Phone works fine, but no internet away from wifi?
Sorry but I cannot really help you...
Maybe the sim card isn't working correctly. The newer version of iOS 5.0.1 (9A406) should solve the sim card problem that concerned some providers. -
my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?
This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get. -
My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use. -
My macbook pro cannot connect to internet via wifi
I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
MonirehWhen you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro -
HT4623 After ios update on my ipad mini i am unable to connect to internet via cellular connection
i Have update ios 7.0.2 on my ipad mini. But after update of ios 7.0.2 i am unable to connect to internet via cellulau connection. Cellular connection appears on my screen but i get error as "Could not activate cellular data network you are not subscribed to a cellular data service". Cellular connection was working prior to ios 7.0.2 update. Please help.
GOT MINE FIXED -
THE 7.0.3 update reported my iPhone as LOST or STOLEN to Verizon.
They suspended my iPhone service immediately (as I would expect them to) and THAT is why I couldn't get on.
Called Verizon wireless - they restored me in 30 seconds - EVERYTHING WORKS AGAIN.
They said "we've been doing this ALL MORNING."
Hope this works for others, too!
You blow bright orange chunks, Microsoft, er, I mean, Apple. -
Unable to connect to internet via the proxy - Proxy set up OEM 12c
Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS. -
My wifi bar isnt showing up at the top and i cant connect to internet but its not my router
my wifi bar isnt showing up at the top and i cant connect to internet but its not my router? HELP HOW DO i get wifi back
I recommend that you start with taking a look at the Apple Support article to help you troubleshoot what the issue may be.
If that still doesn't resolve the issue, we will need to get the AirPort icon back on the OS X menu bar to continue. Please try the following:
System Preferences > Network > Wi-Fi > Show Wi-Fi status in menu bar (checked) -
I have a problem in connecting to internet via WiFi.
I have a problem in connecting to internet via WiFi. This week I received my new "iPhone 6 and 6 plus". Problem is the new phones doesn't connect to internet via my home WiFi while I don't have any problem on my other devices. The phones connect to WiFi but most of Apps can't connect to internet.
Hi vpouya,
If you are having an issue with connecting to the Internet from your iPhones via Wi-Fi, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
My iphone works fine using cellar network, but will not connect to internet via wifi. Ive reset network setting with no diffrence.
Any ideas?And you can turn the WiFi button on and off?
If yes, then you next need to try to Restore your iPhone from your backup. -
Can't connect to internet via MacBook Pro to Airport Extreme
I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.
Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.
Maybe you are looking for
-
My history is no longer showing up in the history menu, is there any way I can it back?
When I click on the history menu it used to show all my history but a few days it stopped doing that.
-
Clearing a open item with two bank accounts at a time
anybody answer the below question please how can clear the vendor line item using two bank accounts at a time
-
I wondered if it was possible to create alphabet letter templates with CS2 wherein I can use the template over my wildflower photos? If this isn't possible, is there any digital photo template software available for this?
-
Dynamic TSQL Statement with Dynamic Parameters
I'm trying to utilize a dynamic TSQL Statement where I can have various parameters passed of differing kinds, e.g. In some cases parameter 1 would be an int, other cases it may be a datetime, or varchar, etc. I'm going to keep a table of with certai
-
I want to create a basic XML object in AS3, but don't know how to do this. I first tried creating a string that represented my XML elements and their values, but then I don't know how to convert this string into an XML object. Secondly, I believe the