I cant connect to my routers IP address.

Hi, I  have tried just about everything I looked up belkin router and stuff found my routers IP  which is 192.168.2.1 and i cant connect i looked on CMD and i found gateway ip and tried that I still can connect can anyone help me?
Message Edited by Fauzool on 11-06-200607:59 PM

First, verify that you got your router IP address correctly.  Go to command prompt and type ipconfig.  It should be the IP address listed under default gateway
If you do not get a default gateway from the previous step, verify that your network cable is correctly connected from your computer to the router's LAN port.  Try the above steps again.  Verify if you really have a connection by checking if your laptop adapter's lights are blinking AND you can ping your router's IP address (e.g. ping 192.168.1.1 from a command prompt)
Next, open your browser and connect to your default gateway (router's IP address).  You should be able to see the correct screen.
I also had the same problem when I first used a similar router.  If the above does not work, try powering down the router, wait 10 seconds, turn it on again and repeat the above steps.
Hope this helps.
tb

Similar Messages

  • Cant connect two linksys routers to each other.

    well the routers we have are the WRT54G and the WRTSL54GS but i m not sure about the second one (it has three antenna) . so we have the WRT54G hooked to the modem and its recieving internet and working with the (wired) main computer. so now we have to go about 1 block away to a neighbors house. and we set up the WRTSL54GS set up 1/3 of the way. now the laptop a block away from the main computer is recieving a signal (3 bars) from the WRTSL54GS. but it can not connect to the internet. what am i doing wrong?
    Main comp-WRT54G----------------------WRTSL54GS--------------------------------------------------------laptop

    Both routers are “transmit” devices and were not made to talk to other routers. You would need a wap54g or third-party firmware to make your router an access point.
    WRT310N
    WRT350N
    WPC4400N
    EG1032
    NAS200
    SD2005
    PAP2
    WPS54G

  • Can someone please help i cant connect to itunes from my iphone 4 ,,i had an iphone 3 and when i got my iphone 4 i changed my email address for new itunes account and my old phone which hubby uses

    Can someone please help i cant connect to itunes from my iphone 4 ,,i had an iphone 3 and when i got my iphone 4 i changed my email address for new itunes account and my old phone which hubby uses is changed aswell ..for some reason i cant update my apps off m iphone & in itunes via pc it will say apps are all up to date but i have 25 apps that need updating please can someone help ,, i can download a new app but i cant update existing ones ,,,
    very frustrated iphone user !!

    Changing devices is no reason to create a new Apple ID.
    All content purchased from iTunes is permanently linked to the Apple ID it was purchased with.
    To update apps purchased with the old ID, you MUST sign in with that Apple ID.

  • I cant connect to wifi but my laptop can and my other phones can.ived done all the recommendations in ipad support but still cant connect..what else shall i do?

    i cant connect to wifi but my laptop can and my other phones can.ived done all the recommendations in ipad support but still cant connect..what else shall i do?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Cant connect to the internet using my wrt54g

    i bought the linksys wrt54g yesterday brought it home put in the setup disk and everythin was goin good until it came to step 10 and an error message came up saying: cant connect to the internet please shut off modem and turn it back on so tryed that still didnt work. so i found a thread when i searched this problem that said i had to bridge my westell 6100 modem to the router or somthin like that so i followed those steps and it still doesnt work can som1 help me please!?

    Did you try to change the routers Ip address to 192.168.2.1?
    I am not sure of that modem and not sure if it has a built in router ot not.  Call your ISP and see if that modem is also a router running DHCP and everything else.
    Richard Aichner (Ikester)

  • My ipad cant connect to wifi

    my sisters ipad cant connect to the wifi

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Safari cant connect to a server.

    I have Safari Version 7.0.2 (9537.74.9)  Running on a powerbook  with   10.9.2
    message. when I open google, facebook or twitter...  "Safari cant connect to server."
    and firefox .. but I can open almost any other website. 
    This is the message I get in Firefox.
    Unable to connect
    Firefox can't establish a connection to the server at www.google.com.
        The site could be temporarily unavailable or too busy. Try again in a few moments.
        If you are unable to load any pages, check your computer's network connection.
        If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    Sometimes when I restart the computer it works for a few minutes then it gets blocked again...
    I have tried restarding the browsers, deleting the cookies and a few other stuff but nothing seems to be working..
    This is a new Mac ANd I havent installed many programms in it.   

    You, or someone using your computer, changed the network settings in an attempt to bypass copyright restrictions on Netflix. The illegal DNS server you're using should never have been trusted and now doesn't work. 
    Delete all the DNS servers by selecting them and clicking the minus-sign button at the bottom of the list. You may have to unlock the settings first by clicking the padlock icon in the lower left corner of the preference pane and entering your administrator login password when prompted.
    If the server addresses are grayed out and can't be deleted, even with the preference pane unlocked, then the change was made on your router. Refer to its documentation to find out how to reverse the change. The router should get its DNS settings automatically from the ISP.
    Click OK, then Apply. The DNS server list should be repopulated automatically with the address of your router, or the addresses of the DNS servers provided by your ISP. If that doesn't happen, open the TCP/IP tab of the preferences and click Renew DHCP Lease. If you're not using DHCP, manually enter the DNS server addresses you got from your ISP, or else use these temporarily:
    8.8.8.8
    8.8.4.4

  • I cant connect to WiFi on my iPod Touch 1G?

    I have had an iPod Touch 1G for quite some time now, but I recently upgraded the iOS firmware to 3.1.3, and I just noticed that I cant connect to wifi! Nothing is grayed out, but it cannot find any connections. Ive tried resetting my router and wifi settings, but that diddnt seem to work either.

    So it is not this problem:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Teh try:
    Does the iPod connect to other networks? (noit clear if you have access to more than one)
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

    i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

    Is the status light green?
    Your Airport device may be in Bridge Mode.
    Airport Utility 6:
    Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
    Airport Utility 5:
    Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right.

  • HT204400 no matter what i try,  my apple tv says it cant connect to the network and it gives me error -3906.  i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

    My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi.  I have tried to restart and restore both the apple tv and my modem.  still the same issue and same error message.  any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • WRT54G router IP address is the same as my modem's IP address. how to change the routers IP address?

    The broadband modem got broken and the ISP changed it to a new modem. Now my problem is I cannot use the router when they changed the modem. The ISP won't provide support since they didn't provide me with the wireless router. I've read through the forum and found that I had to change my router's IP address. WRT54G router IP address is the same as my modem's IP address, 192.168.1.1. I already changed the local IP address of the router to 192.168.1.2, saved the setting, released and renew the ip address. Now, when I connected my internet modem cable to the router, I cannot connect to the internet. I am able to ping 192.168.1.2 but I cannot connect to the ping 192.168.1.1. Please help me do the proper setup.
    Thanks!

    Hello! I solved my problem but I find the solution so weird. After changing the routers IP address to 192.168.1.2, instead of plugging the modem cable on the Internet port of the router, I plugged it in one of the WAN ports. Presto, it worked. Even my wireless connection is also working.

  • I cant connect my ipad 2 to the wifi unless right next to the router

    i cant connect my ipad 2 to the wifi unless right next to the router

    I just wonder if I have to take it to the store to get connected?  This is crazy, been working with this thing for an hour.

  • WRT400n cant connect wireless to pc

    HI
        First time connecting a router ,I installed it made it through all the checks using the advisor,when i clicked go wireless took forever to get the network address and when it said you are connected i unplugged the ehternet cable and lost the connection now it tells me it cant connect to the router?  I have vista on one pc ,router is about 35 feet from laptop in one story apartment ,any help would be appreciated
    thanks

    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • Just bought my ipad and cant connect to my home wifi. Any ideas?

    Just bought my ipad and cant connect to my home wifi trying to do initial set up.
    My wifi is working as my macbook runs off it..any ideas?

    1. Turn router off for 30 seconds and on again, this will refresh the IP address of the iPad.
    2. Settings>General>Reset>Reset Network Settings
    3. Try changing router security e.g. WEP/WPA/WPA2
    4. Have you updated router firmware?

  • Cant connect to safari-used to work fine!!

    i just returned from out of the country...my wireless worked fine before i left, while i was away and i get home and cant connect!  My boyfriends computer is fine, i am using it now.  I have spoken with my provider and they couldn't help me-after taking me through system preferences, making sure i had the correct ip address, manually entering my network and passcode, restarting the connection, my computer, i think i have tried everything.  it says i am connected but safari is saying i am not.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

Maybe you are looking for

  • Refresh System Data in Integration Directory PI 7.11

    Hey, I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory. I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't f

  • Is there a way to include S/MIME encryption on messages sent from the Photos app?

    I have encryption set up and working on my Exchange account, but I also want to send attachments with the encrypted messages. When I try to send images as attachments by selecting the "share" option in the Photos app,the message that is created does

  • Why does Verizon Penalize Long-time Customers?

    I started out as a Alltel customer in 2004 and became Verizon during the merger.  I had a pretty nice plan at 500mins with unlimited text and data.  When Verizon started their More Everything Plans, they started alienating those of us who still had u

  • Substitution variables deletion

    Hi , Some Substitution variables have been deleted in our prod env ..............where/which log files can we find the information ..who deleted them?

  • Net Configuration assistant failed

    Hello, I tried to install Oracle 11g R2 on CentOs 5.4, everything went well until "Net Configuration assistant". I couldn't see the run root script so... I think the problem is because I didn't define the host properly at /etc/hosts. I have fixed thi