I cant download anything including Updates, when i try to download a black box appears saying that i have to power off the laptop using the button, and it freezes, so i have no option but to power off. Please HELP

I cant download anything including Updates, when i try to download a black box appears saying in 4 different languages that i have to power off the laptop using the button, and it freezes, so i have no option but to power off. Please HELP

Well, at least it's good that there are no hardware issues - that's a relief and one problem area that you can check off.
OK, so let's summarize so I can get a clear picture of what's going on. If you try to download something from your web browser, what happens? What if you try to download a small utility such as "EasyFind" from the App Store? Or is the problem specifically linked to downloading updates?
I'm just trying to get a feel for if anything really means anything?
Usually what you download from, say, a website, goes into your Downloads folder. It's the default folder for things like that. Apps from the App Store are downloaded to your Applications folder. And software updates are generally, I believe, held in a temporary folder so that they can be installed (in many cases) when you're asked to restart.
It could be something as simple as repairing permissions on your start-up disk. You're running Snow Leopard, right? (That's what your profile says.) Try opening Disk Utility from your Utilities folder, selecting your boot disk and try verifying permissions. If you come up with some errors, try repairing permissions. After that, go ahead and verify your boot disk - you won't be able to repair it at this point, but at least you can see if you have any errors.
Let me know about the anything and get back to me after you've verified and repaired permissions and verified your boot drive.
Good luck,
Clinton

Similar Messages

  • When I try to open iTunes, Error 2 appears saying that iTunes won't open b/c "Apple Application Support was not found". What do I do???

    When I try to open iTunes, Error 2 appears saying that itunes won't open because "Apple Application Support was not found". What do I do???

    If your problem is only w/iTunes, you really should re-post over in the iTunes for Windows forums instead of the iPod forums. 

  • I am using an iphone 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.

    HEY GUYS I AM USING AN IPHONE  3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
    AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
    PLEASE HELP ME.

    This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.

  • Hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing play

    hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • I cant download apps music etc.when i try to download, a box comes up saying your apple id has been disabled. how do i undisable pls?

    i cant download apps music etc.when i try to download, a box comes up saying your apple id has been disabled. how do i undisable pls?

    Apple ID disabled
    http://support.apple.com/kb/ts2446

  • New ipad3, just getting started, trying to get on facetime but when I try to set up a message appears saying my email address is already in use. I am now stuck and I can't get any further! Help please!

    New ipad3,just getting started,trying to get on FaceTime but when I try to set up a message appears saying my email address is already in use. I can not get any further, help please

    Millietrixie-
    Are you trying to call yourself to test FaceTime?  If so, you must have a second E-Mail address registered with your Apple ID.  In other words, there must be a different E-Mail address on each unit.
    Fred

  • HT1420 I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to

    I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to solve this problem?!

    Hi all.  I can’t tell you how to solve your iCloud 3.x issues.  Heck, I don’t think they’re even solvable.
    But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem.  …without even a re-boot.
    Log out of iCloud 3.0 and uninstall it.
    Open My Computer and then open your C:\ drive.  Go to Tools/Folder Options and click on the View tab.  Select the “Show hidden…” radio button and click on OK.
    Open the Users folder.
    Open your user folder
    Open ProgramData (previously hidden folder)
    Open the Apple folder – not the Apple Computer folder.
    Open the Installer Cache folder
    In Details view sort on Name
    Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
    Right click on iCloud64.msi and select Install.
    When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco.  The pictures will be synched to the same Photostream folder as before the “upgrade”.  Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
    I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
    For those of you who hate to go backwards, think of it as attacking to the rear.  Which would you rather have, the frustration of no synching or everything working on an older version?
    Good luck…

  • HT201365 How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    Change your country on iPhone, iPad, or iPod touch
    Tap iTunes Store, App Store, or iBooks Store.
    At the bottom of the Featured page, tap Sign In.
    If you're already signed in, skip to step 5.
    Tap Use Existing Apple ID.
    Enter your Apple ID and password and tap OK.
    Tap your Apple ID.
    Tap View Apple ID or View Account.
    Tap Country/Region.
    Tap Change Country or Region.
    Tap the Store menu and tap your country.
    Tap Next.
    Review the Terms and Conditions and Apple Privacy Policy.
    Tap Agree if you agree to the terms and conditions.
    In the prompt that appears, tap Agree.
    Select a payment method and enter your payment information.
    Enter your billing address and tap Next.

  • HT1976 I am in turkey. Just bought a new Turkcell SIM card for my iphone3gs. When I try to connect to Turkcell network, it says that the selected network is restricted however the sim works in ordinary phones. Can you help please.

    I am in turkey. Just bought a new Turkcell SIM card for my iphone3gs. When I try to connect to Turkcell network, it says that the selected network is restricted however the sim works in ordinary phones. Can you help please.

    If a phone is sold from one friend to another and wants to use it on a different carrier the friend can contact the carrier it was sold by to request it unlocked.  I know AT&T, Verizon, and Sprint will give you the steps to unlock it as long as the original contract it was bought under has been completed.  eBay/Craigslist is really not the best place to try to get "unlocked phones" from, if it turns out the phone isn't unlocked then I'm really sorry you got stuck with that one and as stevejobsfan said above I would report them immediately and see if you can recover your money.  I sell phones for a living and this happens a lot

  • I used my adobe code, but when i try to install my programms it still says that i need to buy it. But i already did and i used my code.

    i used my adobe code, but when i try to install my programms it still says that i need to buy it. But i already did and i used my code.

    Are you getting " buy " on Creative Cloud App?
    If yes then sign out from Creative Cloud App and sign back
    Sign out, Sign in | Creative Cloud Desktop app
    If you are getting the same status then check your hosts file entries once
    Sign in, activation, or connection errors | CS5.5 and later

  • When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.

    When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
    == This happened ==
    Every time Firefox opened
    == I tried to download firefox. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)

    When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
    When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
    If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
    Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

  • When importing photos from my iPhone black boxes appear in place of random photos in the library and in Photostream.

    When importing photos from my iPhone black boxes appear in place of random photos in the iPhoto library and in Photostream. It has no apparent pattern, the photos are just blank. It's not just icons, when I go to edit the photos externally in Photoshop it opens an image filled with nothing but black.
    This is more than annoying. It's effectively deleting photos I'm taking on vacation and so forth.
    Anyone?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • I lost my iphone 5 yesterday and i tried using find iphone and i found it offline. What is best to do? Please help me. Thank you..

    I lost my iphone 5 yesterday and i tried using find iphone and i found it offline. What is best to do? Please help me. Thank you..

    If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, or you don't have a backup, you will have to force it into recovery mode & restore as a new device.
    See this for more info... http://support.apple.com/kb/HT1212

  • My iTunes isn't playing a movie, how do I fix it? I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program.

    I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program...how do I fix this???

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I cannot get my iPod to sync to iTunes. When I try to sync it, a box appears which reads: "An unknown error occurred (13019)."

    I cannot get my iPod to sync to iTunes. When I try to sync it, a box appears which reads: "An unknown error occurred (13019)."

    Have a look at the  More Like This  Section on the right...

Maybe you are looking for

  • OBIEE 11g Time Series Function

    Hi All, I am trying to compare this year to date sales to last year to date sales and this code is not working: TODATE(<Measure>,<Time_Level>) For bellow syntax we are getting an error Formula syntax is invalid. TODATE("Fact - Sales Order Lines"."Net

  • Can't save as pdf/a

    Starting from any pdf-document in wich I delete alle items (text, graphic) exept one text-item or starting from an pdf made in MS Word 2010 (containing simply the word Text) and then saving as a pdf-a, gives me always errors that the document couldn'

  • Vietnamese Character

    Some of Vietnamese characters are not displaying in the PDFs. Original Text : Số tham chiếu của ngân hàng Text Displayed in the PDF: S tham chi u c a ngân hàng

  • Apply patch 12419392

    Hi Guys, I am running on RHEL5. I get the ORA-00600 error ORA-00600: internal error code, arguments: [kcblasm_1], [103], When I check at my support I get this note ID 232594.1, that shows that this is a bug that needs the 10.2.0.5.4 Patch Set Update

  • Enet IP communication with 1794-AENT module

    Has anyone had success with communicating with the Rockwell 1794-AENT/B ethernet modules?  I have one of the Flex I/O ethernet interface modules with two 8 port analog in modules connected.  I can read the 1794/AENT module information, using the ENET