I cant find a fonctional Wacom Driver for my x61 SXGA Tablet!

Hi volks
i cant find a fonctional Wacom Driver for my x61 SXGA Tablet!
I installed once the new Bamboo Driver (5.08) from the Wacom Homepage.
But the Driver didn't wokk, i was written that none supported device could be find.
So I installed the old Bamboo Driver (5.07) on it, and I had some Problems. I couldnt calibrate my monitor, there was only the arrow when i moved my pen and when i turned the desktop 270°, there was a problem with using the pen: When I went with the pen down, the arrow went up. One positive thing was only that the pressure ability was working fine in photoshop.
You know maybe which driver i should try?
http://www.wacom.com/productsupport/model.cfm btw. i cant find this sticker on the Back of my tablet.
greez

 Since this thread is on the subject of the stylus..........
I've noticed that when turning the LCD (flipping it over for tablet position) on some units the stylus will stop working. I'm seeing this alot. I've replaced LCD cables, made sure theres enough slack so its not pulled when turning the LCD 180 deg., etc.
     I can't see any types of sensors that would signal the driver or BIOS when the display is flipped into tablet position - but am I missing something. Does the software know when the display in in tablet mode - if so, maybe this problem is indeed driver or BIOS related.
   Does anyone know what could be the cause....and /or the answer here?
                   Thanks........DCO

Similar Messages

  • WINDOW 8.1 Cant find USB 3.0 Driver for H87 G43 Gaming

    Cant find USB 3.0 Driver for Win8.1 64bit.

    i don't see such drivers for Win8:
    https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=3467
    probably Win8 already include those drivers

  • Building wacom driver for tablet laptop

    Hi folks,
    Here's my problem: I am trying to build the latest wacom driver for my tablet laptop so I can use touch sensitivity in gimp and other applications. I seem to missing some libraries or some thing, this is the relevant part of ./configure:
    checking for valid Xorg SDK... "xf86Version.h missing"
    "Tried /usr/X11R6/lib/Server/include and WCM_XORGSDK/xc/include"
    ./configure: line 19566: cd: /usr/X11R6/lib/Server: No such file or directory
    and:
    *** WARNING:
    *** Unable to compile wacom_drv.{o,so} without XF86 build environment
    *** or Xorg SDK.
    *** wacom_drv.o will not be built
    What is the Xorg SDK (software development kit?) and does anyone know where I can get it? Will I have to build Xorg from source? I have done a search in pacman and on the website and can't seem to find anything.
    Note in other distros (ubuntu & gentoo) the package is called linuxwacom.
    Thanks in advance for an help!
    Ben

    Ok, were to start? 
    I've looked at the link to the wiki that Wain posted, there were not much instructions but guess that its just to C&P the package build and run it? So I did but got errors.
    First this.
    '/PKGBUILD: line 189: syntax error near unexpected token `{
    '/PKGBUILD: line 189: `getvar(){
    Then after the dependencies check and just after the "Starting build()..." I get this.
    /usr/bin/makepkg: line 599: build: command not found
    I searched the forum for the line 599 error and found a thread, but it didnt help much.
    But I did a namcap on PKGBUILD if that is to any use.
    PKGBUILD ("pkgname$_cfgname") E: Missing md5sums
    PKGBUILD ("pkgname$_cfgname") W: Missing Maintainer tag
    PKGBUILD ("pkgname$_cfgname") W: Missing CVS Id tag
    PKGBUILD ("pkgname$_cfgname") W: Reference to i686 should be changed to $CARCH
    Im unsure about the whole Kernel compilation part, I must done something wrong.:cry:
    So some help would be appreciated, I realy what my Voltio to work!

  • Where can I find a Mac printer driver for the HP LaserJet 1536

    Where can I find a Mac printer driver for the HP Laser Jet 1536dnf MFP

    Hello, Mario here. All drivers available for this printer are located here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us& dlc=en&lang=en&cc=us
    Select your operating system and you will be able to see what drivers are available. Let me know if you have any other questions.
    I work on behalf of HP

  • Where do I find the Lab View driver for spirent smartbits 6000 and HP 8157A?

    Hi, Could you please guide to the place where I can find the Lab View driver for spirent smartbits 6000? Also, I need the GPIB driver for HP 8157A.  Iam planning to automate thermotron via a serial interface. So, I think I need a driver for that as well. Could any one of you please guide me to the right place?
    Thanks in advance

    HP 8157A
    spirent smartbits 6000 - Our beloved knight will surely help you

  • I need help finding this hp hard drive for dv6521eo

    I need help finding this hp hard drive and memory  for dv6521eo

    Hi:
    You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
    Memory is PC2-6400.
    Paul

  • Re: Satellite A660-12P - can't find the right display driver for Win XP

    Hey everyone, i need some help with this one:
    I just made a dual boot Win7 (x64)/XP (x86) on my laptop, but i can't find the right display drivers for the video controller VGA compatible on XP.
    Does someone know where i can find them?
    Many thanks,

    Yes, you get this message because you cannot install the nVidia rivers only executing the exe file.
    If you want to install such drivers then you have to do this in device manager.
    You have to force the notebook to choose the driver
    You can do this choosing the advanced installation procedure which helps you to point to the driver files!
    PS: might be helpful:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  • Where can i find windows 7 webcam driver for compaq cq61-100sl​?

    I'm searching for a webcam driver for compaq cq61-100sl but i can't find it, please help me!

    Hi:
    Normally, all you need is to install the Cyberlink YouCam software.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-78419-1&cc=us&dlc=en&lc=en&​...=
    Paul

  • Why I cant find Pages, Numbers, Keynote apps for free on my New Iphone 6?

    I am using a new Iphone 6 with iOS8.1
    I cant find the apps like Pages, Numbers, Keynote, iMovie etc for free? Aren't they free?

    If you do not see them preinstalled - you can download them from the App store - yes they should be gratis

  • Where can I find Qualcomm Gobi 2000 driver for T410 with Windows 8

    My T410 2522 MZ5 has been upgraded from Windows 7 to Windows 8 for almost a year. But in the driver download section of this web never have the driver for Qualcomm Gobi 2000 WWAN connection.
    I see some members of this forum had the same problem but he said he found a beta version of the driver in this thread (http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Windows-8-Gobi-2000/m-p/1172795#M81910). So anyone please give me a link to download this driver.
    Thank you very much and sorry for my Engish may not quite good.

    King_Penguin wrote:
    What are hoping to achieve via Bluetooth ? On iOS devices it's mainly for headphones and keyboards, not, for example, for copying content between the devices : supported profiles
    I was actually hoping to use my computer as a DHCP. I am in Iraq and have a very hard time getting a solid connection. However my computer has no issues. I am usualy able to use Safari but can not get to iMessage or Facetime servers. I have Windows 7 64bit a bluetooth compatibility. Not looking for any file transfers or special stuff. Just a ICS set up.

  • Where do I find the boot camp driver for my MacBookPro3,1

    I have an older model intel macbook. The model identifier is MacBookPro3,1. Can anyone provide me with a link to download the correct boot camp assistant and drivers? I don't have the old installation cds that it normally comes with. Any help would be appreciated.
    Also, I'm also doing the same thing on an intel MacPro. It isn't the latest model but the model just before that.

    Apple makes it so you need OS X DVD to get Boot Camp 3.0 first before you can install or download updates.
    Call and request replacement DVD, or just buy SL 10.6.x DVD $29.
    That would be newer and your OEM didn't come with 10.6.
    I assume you have the original discs for 2009 Mac Pro.
    Any 10.6 DVD will provide Boot Camp driver for any Mac.

  • Need driver for windows 8.1 tablet for m1212nf laser printer

    I bought a windows Surface 2 tablet ( 32) and am not able to get the driver for my M1212nf HP laserjetr
    Please advise if possible
    Thanks in advance
    Etienne Huyghe

    Hello etienne53,
    I understand you would like the software and drivers for your LaserJet  M1212nf for your Surface 2 Tablet that is running Windows 8.1 32bit. Please click on the link for the downloadable HP LaserJet Full Feature Software and Drivers for 8.1. 
    I hope you found this helpful, please let me know if you require more assistance with the download.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Cant find Realtek Wireless LAN Driver download for my Qosmio X500

    Hi,
    i just reinstalled windows on my Toshiba Qosmio X500-140 and installed all drivers i need.
    But i couldnt find the Realtek Wireless LAN driver in the download list.
    I just found the LAN Driver. So i just can connect to the internet with LAN cable.
    Please some help
    With kind regards.

    Check please Toshiba WLAN portal on http://aps2.toshiba-tro.de/wlan/
    I hope you can find it there.

  • Problems installing Windows 7 with boot camp, cant find the cd/dvd driver...

    I´m having some problems installing Windows 7 on my new 12,1 (21,5) iMac with boot camp. When the computer restarts and the Windows 7 setup begins, i get the message that the cd/dvd driver cant be found, so i can't continue the installation. I've tried searching online for the driver, but can't find it. The cd/dvd seems to be a OPTIARC cd/dvd ad-5690h, which seems to be produced by Sony. I have a authentic windows 7. I even tried loading everything ver to a usb-drive, but then it wont boot.

    After reading around on this, and other forums I tried to burn a new dvd at reduced speed(2x), but that did'nt work either... I have an authentic windows 7 iso, downloaded with serial, is there any way to boot this from a jump drive or external hdd?

  • Finding 4mm Ballhead Hex Driver for Removal of PM G5 CPU

    I'm in the process of swapping out the power supply on my PM G5 2.0 Dual and can not seem to find a Long-Handled 4mm Ballhead Hex Driver. I've had no problem locating the official Apple tool (part# 922-7082) but at a cost of $38.95 it is a bit steep for my budget.
    If anyone knows where I might find a Long-Handled 4mm Ballhead Hex Driver please let me know. I've already checked at Lowe's, Sears, Home Depot & our local hardware store with no luck. 4mm Ballhead Hex Keys & sets are available but all are too short.
    Any help would be greatly appreciated.
    Thanks
    Tim

    Hello
    Well, I guess I'll answer my own question. I went back to Sears & bought a Hex Driver set, the one with the tork handles. I had to modify the handle a bit on the 4mm ballhead so it would fit down into the hole but after that it worked beautifully.
    Hopefully this will help someone.

Maybe you are looking for

  • Why is the button sub-picture on all the time?

    I have been told to create a menu with just one button on it... PLAY. Don't ask me why. I think it is weird too... I insert the DVD in the player, menu appears, and, a fraction of a second later, the sub-picture comes on. Same thing happens in PREVIE

  • Supplied credentials not accepted by the server and Could not validate SPNEGO token

    Hi, We have installed and configured SSO 2.0 SP02 on HP-UX system. We have exported the client policy files, root certificate from SLS and imported the same in the client PC. Then we have installed the SLC in client PC with logging enabled option. No

  • How to we retrieve database content to a cell table?

    hi all, i am trying to let user to view the database data from Web dynpro through the use of table view in a web page. Was wondering where do i get start if i am using a MS SQL DB. Any beginner tutorial to guide me to that? thx~

  • 7.5 schedule in EPM 10

    In my 7.5 workbook after submit macro  we monitor the events to capture the save complete before we proceed with next action like expand or refresh . But that code in EPM is throwing an error saying can't run macro and mayn't be available. What is th

  • Error While installing 10g

    Hi Initially, in my system, i installed oracle 9i and uninstalled . Now when i try to install oracle 10i , system throwing error like this 'Error Reading setup Initialization file' I do not know How to handle this error. Please guide me how to overco