I cant find create a Windows 7 or ... in my bootcamp

i want install windows 8.1 on my macbook pro mid 2010 but i cant find create a Windows 7 or ... in my bootcamp
I have yosemite on my macbook

Your Boot Camp Assistant is prompting you to remove Windows 7 or later version. If on your mac there is already a Boot Camp partition then you need to remove it first and then start the process again.
If you have Windows 7 on it, you might try to upgrade to windows 8: Boot Camp 5.1: Frequently asked questions about installing Windows 8 - Apple Support
There is also one more thing... Your Mac model has a built-in SuperDrive. I might be wrong but the option to create a bootable usb drive from Windows ISO file might be only available for 2012 models of Macs without a SuperDrive. In that case, you might have to Burn your Windows ISO and install it from DVD.

Similar Messages

  • Iclode cant find my pc (Windows 7 )in iclode

    Iclode cant find my pc (Windows 7 )in iclode and it doesnt steam my photo in pc

    Dr Chris:
    Thanx for answering my Q of a month ago. As you can see from my post of 18 minutes ago, things have gone from bad to worse under my neglectful eye.
    To answer your answer:
    a. I WAS using a NEW USB cord when I posed the question.
    b. I've now downloaded the update service. I can try updating the phone from its File manager state. I'm just afraid whatever data is on it will get wiped, no?
    Point of order:
    If I've had an answer - or more than 1- to my question, but I still need to discuss it- should I Check the "Yes my question has been answered" box? I did not, here, because I thought it might result in my further questions dropping off the radar for forum experts. Please advise... \\Butter F

  • When starting macbook pro it cant find disk with windows suddently

    I used bootcamp some time without problems and mac cant find windows partition disk suddently, there are only macintosh and recovery disk to choose

    Boot from Windows 7 DVD
    There are more than three, but you should be able to see Lion, Lion Recovery, and Windows. There are also GPT and EFI partitions. On Windows there may and usually is a 100MB system partition as well that looks like FAT and can get confused with or overwritten by the EFI 128MB partition.
    YOu should be able to enable showing hidden partitions in Lion Recovery Disk Utility and check the health of all partitions.

  • Can't create a Windows Seven USB drive using Bootcamp

    Hi! I ve been trying to create a Windows Seven bootable USB drive using the Bootcamp Assistant. I tried to create it using an ISO of my Windows DVD in order to install it on my new Mac Mini. My problem is that I get an error: Your bootable USB drive could not be created, an error occurred while copying the windows installation files. My USB drive is 8G, and I‘ve tried with a 100G external HDD too... So it‘s not a size problem. I also tried to format the drive different ways without any success... I found lots of threads relating to this problem but none of them had a solution. Any clues? Thanks in advance!

    You can create a bootable usb via bootcamp

  • Cant find print function windows 8 and adobe reader

    I have windows 8 and adobe reader 9.5. how do i print?

    I resolved my issue! The new app format with windows 8 takes time to master. The adobe reader does not have a friendly toolbar. No print function on the bottom tool bar when all other actions except printing are noted. I finally decided to check my main side tool bar and there was my printer seeing the adobe file and ready to print. So I resolved my issue but very much appreciate your reaching out to help me. Thank you!

  • Having trouble creating the windows 8 installation usb using bootcamp

    Hello Everyone,
    I am trying to install windows 8 on my early 2013 MacBook Pro retina. I am using Mavericks if that matters. I have got the iso file that I need but I am having troube creating the install disk/usb. Everytime I go to create it, I get an error message telling me that the drive could not be formatted properly. I have looked up possible solutions but nothing seems to work, I have unmounted the iso file, tried putting it on the Mac's HD but nothing I do works. Please help.

    Welcome to the Apple Support Communities
    After using Boot Camp, your computer will start always in Windows. To start in OS X, just hold the X key while your Mac is starting. If you want to start always in OS X, after starting in OS X, go to System Preferences > Startup Disk, and select the OS X partition.
    By default, Windows can't read the filesystem that OS X uses for the partition, so that's why you can't access to the OS X partition. Also, you should have burnt the drivers onto a DVD or a USB drive.
    As you have already downloaded the drivers, after starting in OS X, copy them to a USB drive or burn them into a DVD. Then, start in Windows and install them. Note that Windows 8 requires Boot Camp 5 drivers, that you can only get from Boot Camp Assistant if you are running OS X 10.8.3. If you want to be sure that you install the correct drivers, I recommend you to download again the Boot Camp 5 drivers from the Apple webpage > http://support.apple.com/kb/DL1638

  • Problem creating Bootable Windows 10 USB drive with Bootcamp 5.1

    Hi all,
    I have read quite a number of threads (here and elsewhere on the internet) with problems creating a Bootable USB installation for Windows 10 on OSX Mavericks.    The usual response is "make sure your .ISO is unmounted".    With that being said, it appears that for most users on OSX Mavericks, this alone does not fix the issue.
    The specific error I get is:
    "Boot Camp only supports Windows 7 or later installation on this platform. Please use an ISO file for Windows 7 or later installation."
    As mentioned I have double checked that the ISO is not mounted.    Anyone happen to have any solutions?    Also, would creating a bootable drive from a windows machine still work with my Mac the same way it would if it was created with bootcamp?
    System specs are:     OSX 10.9 Mavericks, Early 2011 Macbook Pro, (MacBookPro8,3).
    Cheers,
    Jonathan

    W10 is not officially supported. BC Assistant checks available software signatures on ISO images to verify that it can be used. This checking is not always 100% fool-proof, though. You are using a 2011 MBP, which is also a factor in this. One option you can try is to install an evaluation version of W8+ and then upgrade to W10. The upgrade does not require BC Assistant, once Windows is fully installed.

  • Cant find output window when executing a trigger in sql developer?

    Hello,
    this is a serious question: I really cant find the output window when i executed a trigger with this code line:
    dbms_output.put_line('hello');
    I dont know where i cann see the word "hello" to test my trigger.
    Can please someone help me?

    There is a seperate forum for SQL DEVELOPER
    SQL Developer
    G.

  • How to "Create a Windows 7 install disk" on Mountian Lion w/Bootcamp 5

    It's basically the same way you create one with previous Bootcamp & OS verisons.
    Finder -> Applications -> Utilities -> Select Bootcamp -> Show Package Contents
    Open "Info.plist"
    Scroll until you see whats listed below.
    <key>PreUSBBootSupportedModels</key>
              <array>
                        <string>MacBook7,1</string>
                        <string>MacBookAir3,2</string>
                        <string>MacBookPro8,3</string>
                        <string>MacPro5,1</string>
                        <string>Macmini4,1</string>
                        <string>iMac12,2</string>
                        <string>iMac11,2</string>
              </array>
    Remove the "Pre" in "PreUSBBootSupportedModels"
    Then it will ask if you want to make a copy of the file, click yes.
    Now in the new "plist" file cut out "MacBook7,1" in the top line and replace with your Model Identifier (Can be found in "System Information" under "Hardware Overview")
    Save this file as "Info.plist"
    After save the old "Info.plist" file as "Old.Info.plist" and move to the trash can (May as for log in info to do so)
    Then after that file is in the trash move the NEW "Info.plist" (The one you edited) to the Bootcamp Content folder in place of the other one.
    If everything is done right you should now be able to "select/disselect" the "Create a Windows 7 install disk" in bootcamp.
    You're welcome,
    Avery

    I recently bought my Mac MIni 2010 Model, yes i know, 2010 Model?! But that's what i can afford for now since i already have an Apple Cinema display, an Apple Wireless keyboard and a Magic Mouse.
    When i tried opening the Boot camp assistant, since my Mac has an optical drive, only two options were shown and the "Create Windows USB install disk" option wasn't there at all.
    So i searched the net for help and i found only one that answers my query (http://forums.atomicmpc.com.au/index.php?showtopic=51873), however, after following the tutorial, it didn't work and my Boot Camp assistant ended up crashing (quit unexpectedly). So i reverted the process and my Boot camp assistant went back, up and running but still no third option.
    So disappointed, i went back to the "info.plist" that i was working on (using Xcode) and tried to mess around with the contents.
    Then after over an hour of trial and error, i decided to just revert the changes that i did and quit. As i was clicking on the , and because i was a noob, i deleted by mistake the entire array of strings containing "Boot ROM Versions" that allows some mac models to boot windows using usb and when i click cmd+z, it just won't undo it.
    So i guess, i was screwd! So nervous that i thought i killed the app, i closed the "info.plist" and checked if the Boot Camp assistant would still launch.
    To my surprise, it actually opened! And to my astonishment, it even shows the third option! I guess, no one has ever did this, as we speak!
    So you can call me an Accidental Hacker LOL! To all of you who understands fully the function of "info.plist" - any thoughts?
    Mac Mini Mid 2010
    OS X Version 10.8.3 Mountain Lion
    2.4 Ghz Intel Core 2 Duo
    2 GB 1067 Mhz DDR3

  • I cant find my sqlite dtabase created for windows phone 8.1 phonegap app in visual stdio community 2013?

    Hello...
    I am creating a windows phone 8.1 phoegap app.It is using local databse called websql using this link.I created app and datas can be fetch from offline.It is working
    very well
    But the problem is i need to see the databse i created.Where to find the databse.In visual studio there is no option to see the databse.
    There is no editor.
    Please tell me where it is stored?

    Hello,
    Based on my knowledge, the db file usually store in storage folder. You can use the following code snippet to find it.
    WinJS.Application.local.exists(dbname).done(
    function (found)
    if (!found) {
    //not found
    There is sample usage in the link you provided, I would recommend you have a look at this.
    https://github.com/MSOpenTech/cordova-plugin-websql.
    If not help, please post more information about your scenario.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
    the survey.

  • Forefox won't start in windows XP: I get the message that windows "cant' find the exe file" even when I click from the program file, rather than the shortcut.

    Forefox won't start in windows XP: I get the message that windows "cant' find the exe file" even when I click from the program file, rather than the shortcut.

    Delete the current Firefox shortcut on the desktop and create a new desktop shortcut via the right-click context menu on the Firefox.exe program (Send to > Desktop)

  • AIO Remote app cant find HP 7150 aio printer on my wifi network, on Windows Phone 8

     HI,
    Yesterday I install You App AIO Remote on Windows Phone 8. I have connected to wifi HP 7150 aio printer, but phone cant find this printer... I have Lumia 1520 and Lumia 920 smartphones both is connect to this same wifi network like printer, but You app on both Lumias cant find printer, again but no problem is to connect to printer WEB interface from this both Lumias, so wifi network is correct configured.
    I have two tablet more in this same wifi network, both with windows 8.1 x64 systems, on this, You Windows 8 modern App AIO Remote find this same printer without problem...
    So what is wrong ? printer config ? eprint is on, ipp is on, bonjur is on, ip is static.
    Please help Me becease I wait for this app and now i cant use them
     Thanx
    Peter

    Hi Peter,
    Welcome to the HP Support Forums.  I understand that you are trying to use the new HP AiO Remote app for Windows phones to print to your Photosmart 7150 printer.
    The Photosmart 7150 printer only supports USB connectivity, I have include the Photosmart 7150 Printer Specifications for reference.  To be able to use the HP AiO Remote app the printer needs to be connected to a wireless network. 
    If you accidentally typed the incorrect printer model, please let me know which make/model/product number of HP printer that you have. How Do I Find My Model Number or Product Number?
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

    my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
    any thoughts anyone??

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • I just update itunes for latest version. Now I can't open it on win 7- 64 bits. I get an erro: Cant find the entry point of the procudere sqlite_wal_checkpoint.. Windows error 127.. help!!!

    I just update itunes for latest version. Now I can't open it on windows 7- 64 bits. I get an erro: Cant find the entry point of the procudere sqlite_wal_checkpoint.. Windows error 127. What can I do...???

    How did you fix this?

  • My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

    My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

    Lbo51380 wrote:
    cant find an itunes app for my laptop. is there something i can get that will help with this?
    Go here -> http://www.apple.com/itunes/download/

Maybe you are looking for