I cant format my laptop! Need help

I cant format my laptop with recovery system.it says Partition removed. What is that mean? is there any solution to format my computer back to factory image?

Hi There,
Machine has recovery partition which is removed or corrupted. In such situation you need to order the recovery media from hp. Steps available below, using these discs you can re-image the machine to factory shipped setup.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334
hope it helps.
I work for HP.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Similar Messages

  • My ipad is saying connect to itunes because it has been disabled. but my itunes says i need to unlock it before i cant do anything. i need help.

    My ipad is saying connect to itunes because it has been disabled. but my itunes says i need to unlock it before i cant do anything. i need help.

    Hi Stephanie,
    Welcome to Apple Support Communities.
    It sounds like you're going to have to put the iPad in to recovery mode before you can restore it. The article linked below provides more details about the passcode lock and will walk you through putting the process of restoring from recovery mode.
    iOS: Forgot passcode or device disabled
    http://support.apple.com/kb/ht1212
    Use recovery mode
    Follow these steps if you never synced your device with iTunes, if you don't have Find My iPhone set up, or if you can't get to your own computer. You'll need to put your device in recovery mode, which will erase the device and its passcode. Then you'll restore your device as new or from a backup.
    Disconnect all cables from your device.
    Turn off your device.
    Press and hold the Home button. While holding the Home button, connect your device to iTunes. If your device doesn't turn on automatically, turn it on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode.
    Click OK, then restore the device.
    Cheers!
    -Jason

  • Third party app. The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Third party app The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Contact the developer of the app.
    Restore from your backup.

  • Need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad

    need help regarding may ipad, i cant access my ipad, need help regarding may ipad, i cant access my ipad

    Can you be little more specific?

  • I bought an iPhone recently and since  then I cannot get my email on my MacPro laptop-need help please

    I bought an iPhone recently and since  then I cannot get my email on my MacPro laptop…need help please

    Good day colletteA11,
    If you are having an issue with being unable to receive email on your MacBook Pro, I would suggest that you troubleshoot using the steps in this article - 
    Mail (Yosemite): If you can’t receive messages
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

    My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

    Last login: Sun Apr 22 19:11:11 on ttys000
    Marlons-MacBook-Pro:~ ryanmnhs$ ls -la ~/Library/LaunchAgents
    total 40
    drwx------   7 ryanmnhs  staff   238  5 Nov 23:09 .
    drwx------@ 48 ryanmnhs  staff  1632 13 Jan 09:53 ..
    -rw-r--r--   1 ryanmnhs  staff   574 24 Oct 22:29 com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    -rw-r--r--   1 ryanmnhs  staff   618 22 Oct  2011 com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.BAF380D0-E780-4E82-86BF-77 2440AB4936.plist
    -rw-r--r--   1 ryanmnhs  staff   895  4 Sep  2011 [email protected].plist
    -rw-r--r--   1 ryanmnhs  staff   802 21 Mar 12:56 com.facebook.videochat.ryanmnhs.plist
    -rw-r--r--@  1 ryanmnhs  staff   805  6 Sep  2011 com.google.keystone.agent.plist
    Marlons-MacBook-Pro:~ ryanmnhs$ 
    ,,,,,,,,THIS IS THE RESULT,, WHAT DOES THIS MEAN? HOW CAN I FIX MY PROBLEM? UP TO THIS DATE MY WORD, EXCEL AND POWERPOINT STILL DONT WORK!!!!PLEASE HELP ME, ANYONE? THANK YOU...

  • New laptop need help with itunes.

    okay so i got a new laptop for xmas and i want to transfer my songs from my old desktop to my laptop. is there a way i can load my ipod onto my laptop and use that to transfer songs.
    my friend said that when i plug in my ipod to my blank itunes it will erase my songs. is there a way to download my songs to my laptop from my ipod?
    i really need help!
    THanks for the help.
    xo kaiit
    windows dell Windows XP

    Your friend is right. the iPod cannot be used to update iTunes. I had the same problem about a year ago, and I just transferred each song using my jumpdrive. It's painstakingly boring, but it will work without wiping anything clean.

  • I got an iphone for my birthday, and when i tried to use it, there was still the apple id from the previous owner so now i cant use it, i need help please

    I need help unlocking an ipod that has the previous owners apple id and it wont let me log on and the previous owner, no longer is able to be reached.

    You will need to contact the previous owner, only they can reomve it from their account : http://support.apple.com/kb/TS4515
    If you can't contact them and get them to remove it then you won't be able to use the phone.

  • My ipod touch wont turn on and i tried to restore it and it says it cant be restored i need help

    My ipod touch wont turn on and i tried to restore it and it says it cant be restored i need help

    what error message?

  • Looking for a new laptop, need help!?!

    I am searching for a new laptop to use in college and i am planning to spend $900 to $1000 on it and would like a laptop that is not too big (like equal to or under 16".) I would like at least 500GB hard drive and processor that is good but not to strong that I have no battery life. I was thinking i5 processor.  I would like it to have enough battery to be able to use through good chunk of day (like 6hr rated or so.)  It needs to be somewhat durable as I know college will take its toll on the computer.  It would be great addition to have a good video card.  I don't know if there is anything out there like this but hope there is.  Please post suggestions or new ideas about what i would need for college.  Thank you for any help!
    Luke

    Hi Lukedmann,
    Thank you for considering Best Buy for the purchase of your next laptop. As we start off the Back to School season you should start seeing the introduction of quite a few new models,  and some that should be able to meet your need. With the way technology advances day to day, this shouldn't be impossible to maintain.
    Personally, taking into account any and all biases I have and stuff, theres 4 models i'd point out to you inside my store. Understanding that these are not your only options, and that I think that the aethetic design of the computer (how nice you think it looks) should definitely play a role, i'm sure any of these should be able to meet the demands you specified.
    3 Models to Compare
    Overall these are pretty close to your price limit, and I chose these assuming you wish to spend 900-1000 on the laptop and already counted in taxes, accessories, softwares etc. Just to let you know I discounted some models to give you the higher quality, however some models which come out to cost less would still meet your specified criteria. Let us know if you have any questions.
    Sincerely,
    Agent Lamar
    ========== If my post was helpful, please hit the Kudo button on the left hand side of my post. While i am an Best Buy/Geek Squad employee, my opinions are my own. Language is both mans greatest achievement and our biggest failures. Miscommunication is always my first assumption. ==========

  • Cant Install iTunes. Need Help Badly

    I cant install the new iTunes. It keep saying Could Not Open Key: Hkeylocalmachine\software\classes\itunes.burn cd\shell. Verify that you have sufficient access to that key, or contact your system personnel.
    I tried ecerything, can someone please Help. Thanks in advance.

    If iTunes is crashing, why don't you send a crash log to those lazy Apple engineers.
    Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log" If there's already a file there, it most likely has multiple crash logs in it (new crash logs are just appended to the end of the file). So, delete this file. This will make sure you're not sending extra information I don't need. These crash logs are text files, so you can open them in notepad or whatever to see what information you're sending.
    So, get the machine setup to collect crash logs, do the thing that makes iTunes crash. You need to send that file to our buddy Roy. Make sure that you include:
    (1) the drwtsn32.log file.
    (2) the link to this thread.
    (3) a one line description of your problem, i.e. "iTunes crashes on launch".
    (4) the username that you're using here in the discussion boards.
    Roy is getting a little swamped with messages and needs to make sure he gets all the information. And if he doesn't get that information, the message is just going to get dropped on the floor.

  • Problems with songs not syncing to iTouch 4g even when in AAC format- really really need help?

    I need answers really seriously pronto as I am going abroad in a few days with little access to any computer and none to mine.
    I downloaded some songs from iTunes a couple of days ago and then synced them to my iPod (which is manually synced due to my songs being split between computer accounts- long story ^^). The songs themselves synced, but they're full of static or just silence. One in particular you can hardly hear- once the song starts playing, it just becomes quieter and quieter, interspersed with plenty of static. The other songs on my iPod are absolutely fine, it doesn't appear to be a problem with the iPod or the computer. I've tried making AAC format versions of these songs (which are absolutely fine on iTunes, just suddenly damaged on my iPod) but they won't sync- I drag them over to my iPod's icon and nothing happens. It worked before with a song that was just silent. I really need some help, I am so frustrated! Thanks in advance for any answers.

    What are the performance Preferences?

  • Working with several video formats aspect ratios need help...

    Hi folks I have searched around quite a bit but I need more specific advice based my situation...I am editing a docu about Japanese biker gangs shot on several different SD cameras:
    MY FOOTAGE
    1.Sony Vx-2000 fitted with a  Century Optics 16:9 converter lens bayonet mounted
    2.Canon Xl2 shot in 16:9 mode
    But I also have:
    ARCHIVAL/ACQUIRED FOOTAGE
    1. Contributor's camera SD 4:3 aspect ratio
    2.Contributor's camera SD 16:9 aspect ratio
    3. Transferred from VHS into SD 4:3 aspect ratio
    I would like to standardize the aspect ratio for the project but I am getting confused as sometimes the footage shot on the sony (which should be true 16:9) appears elongated vertically at times.
    Are my settings off?
    Also, I have "title safe" wireframe on in the Canvas and the images all exceed the outer box. I don't have a TV so it's hard to check what (if anything) gets
    lost. I guees most TVs can handle 16:9 without letterboxing....
    Do I have to worry about that? Which box should I crop to if I letterbox? The out or inner? Or the outside of the screen? Should I just letterbox the whole project?
    BTW eventually I am planning on Uprezing the project to HD using Magic Bullet when outputting.
    The overall question is: Who has experience dealing with multiple aspect ratios in one timeline? Can you offer any advice on a work flow to output successfully?

    Sorry to butt in, haven't read the entire thread.
    Suggest you plan from the beginning to create one timeline but encode for two separate output formats.
    Standard procedure for bringing multiple formats is to convert them to a single format as they are ingested. Decide early what the timeline format will be and transcode everything to that codec before anything is brought into the timeline.
    When your project goesgolden, export a single self-contained movie and take that to Compressor to create release movies that will be played on Blu-ray, SD  DVD, online, or in Power Point, whatever you need.
    bogiesan
    Message was edited by: David Bogie Chq-1

  • Cant open a file need help.

    I cant open spacer_5px.gif file

    martha Fogle wrote:
    I cant open spacer_5px.gif file
    Do you get any error messages?  Is the file on your hard disk?  Can you post a picture here for us to see it.
    It looks like the file might be very small that you can't see it or that it is transparent to see it loaded.  Web designers use spacer files to layout their design correctly but the files are transparent for them to be visible on a page.  However, this may not apply to you but we need more info to advise you further.

  • Col:peopleResource format problem - really need help!

    Hi all
    We are currently using the 'who is who' at the moment for searching the our coimpanies user base which is workin well. However I have a formating issue with the property <u>'col:peopleResource'</u>. Basically it appears on two line when it is displays e.g.
    Current display:
    0 <u>Joe</u>
       <u>Blogs</u>
    Should display:
    0 <u>Joe Blogs</u>
    (the '0' is the Icon)
    I have look everywhere on how to change this but I have had no joy. Any help would be great as this is slowly becomming an urgent problem!
    Thanks
    Phil

    Hi Phil
    From your description its very hard to say whats wrong, but here is my initial thoughts:
    Have you defined the with of the second column somewhere, like in the collection renderer?
    Are you displaying first and last name seperately or are you using displayname(contentlink) in the collection renderer?
    Whenever the layout messes up, it is a good idea to take a look at the html-code the error-prone page generates as it will contain some information about why the information is displayed like it is.
    Kind regards,
    Martin

Maybe you are looking for