I cant get around error -54. my phone wont sync on my new laptop can anyone help me???
error -54 strikes again. I cant get around it at all ive tried everything i've found on the interent
Bummer.
Similar Messages
-
Hi, since i upgraded my iphone to the latest IOS system last week, i have been on this new orange EE network, and since then i have been unable to get onto itunes and the app store, i keep getting the message "cannott connect to i tunes" can anyone help me figure out whats wrong with it? Thanks
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
My I Phone wont sync with my new laptop Windows 7
I just bought a new laptop with Windoows 7 & my Iphone 3Gs wont sync with it
I have spen hours on the phone with apple care & even an hour in the apple store with a genius anyone else have this problem & fix it?i have the same problem itunes sees the iphone and when i click sync it starts prepareing the sync and then finish's seconds later however iv just done a restore on my phone to try and fix the problem and it didnt work and now there is nothing on it apart from contacts and the preinstalled apps and now i cant get anything over from my laptop to my phone and im using iTunes 10 x64
-
my i5 screen is broken, i cant get through my passcode to back up my pictures to my computer, can someone help?
Is it that you cant see the screen or you cant use the touchpanel??
If you have synced with itunes since you set that passcode you should be able to do an itunes backup which will save the photos even without entering the passcode. -
Help!! Itunes is messing up my computer...it freezes everything, i cant get on itunes store, and it wont sync! I already tried uninstalling and reinstalling...no luck!
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now. -
Hi All, I have the latest version of iTunes, however since upgrading I can no longer get iTunes to recognise that any devices (iPhone / iPad) are connected? Can anyone help please. Paul
Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
Or try Cerbu's post here.
Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
Please let us know which approach works for you...
tt2 -
I just bought my first MacBook Pro a few days ago. I can't seem to get my PC to see my MacBook Pro on the network. Can anyone help me get my PC to see my MacBook Pro on my network t?
Thanks,
AlexForgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password. -
VERY FRUSTRATED!!! Downloaded latest itunes on my PC, connected ipad 2, registered device. It says follow onscreen instructions. What instructions. When I turn on my ipad I get an itunes icon with an arrow and a connector cord. Can anyone help me???
hi Yojoeyo,
i have the same problem. did you figure it out? it looks like no one replied to your questions.
Derek -
I just got a MacBook Pro and when I was setting up I got this voice over thing to help me out...I now can't get rid of it and it is driving me crazy...can anyone help?
System Preferences > Universal Access. Turn off Voice Over in the "Seeing" tab:
-
I have an error message that reads: java.lang.noclassdefFounder - need to fix can anyone help?
That's a bug in whatever Java program you're running.
That's not an error specific to OS X.
(There's usually a whole lot more text dumped by Java, too.)
Check with whoever wrote or is supporting the package you're working with. -
My phone constantly turns it self on and off, it won't let my messages load I carnt text or receive and texts or calls, I have updated the new iso7, can anyone help?
Hello Bricky2013,
The following article has some useful tips that can help stabilize your iPhone.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
Hi I already used apple's link to remove u2's free album from my account but it has still been on my phone for the past few weeks. Can anyone help me? I can't swipe-delete because I have never downloaded it.
Edit: nvm disregard, i jst signed in and out
Message was edited by: Hanazawa88Plus my apps like Mail and Safari randomly quit unexpectedly on me daily.
-
I am unable to click on a single iPhoto. I get a huge triangle with an exclamation mark in the center. Can anyone help?
have you done any "clean up" on your Mac using the finder or cleaner software recently?
This indicates a disconnect between the Thumbnail and the original
this can be caused by two things
1 - User action deleting items from inside the iPhoto library - can be directly - can be from the All images list (never delete from there) - can be from running cleanup software like MacKeeer, CleanMac2 or other dangerous, defective software that improperly deletes or changes things in the iPhoto library - if you have done any of these things you must restore your backup from before you did them and damaged your iPhoto library - and I recommend getting rid of any "clean up software" ASAP (although being essentially MalWear it is not easy)
2 - corruption of the iPhoto library - If it is not #1 then Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your database
LN -
i keep getting an error message saying "i do not have enough access privledges " when trying to sync i phone can anyone help me?
Hello ArtyJP,
You can give this a shot to correct the permissions on your computer. I know you have Windows 8, the Windows 7 will still get you in the right place.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf" Can anyone help?
Are you running Kaspersky security software on that PC? (There's been a few reports in recent times of Kaspersky interfering with iTunes installs, with that message being produced.)
If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
http://www.apple.com/itunes/download/
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Any better luck with the security software shut down?
Maybe you are looking for
-
hi there can anyone help me. i have gone back to my iphone as my other is in repair and i tried the passcode to many times and its now disabled and says connect to itunes however it says online that you need to connect it to the laptop you synced you
-
Mini diplayport to vga wont work on projector
I can't seem to get a Keynote presentation to work on a projector. I have a mini displayport to VGA adapter (Model: MB572Z/A) but can't seem to get a signal. Any suggestions? (MacBook Pro 17-inch, early 2009)
-
Had to replace my old v210 with a new one. The new one did not come with a video card or DVD-ROM, so I took them out of the old server. The DVD-ROM works fine, but I either get no output on the monitor, or if I do, it looks like a sync'ing issue (hor
-
My status bar in the upper right disappears
My status bar flashes on and off, but when I try to select something up there, it disappears. It never did this in Tiger. I'm using a 21.5 3.06GHz iMac, Intel Core 2 Duo Running 10.7.2 Carol
-
Is my SB Live! Value soundcard ASIO compatib
Is my Creative SB Li've! Value soundcard ASIO compatible?