I cant get call when i turn on my cellular data on iPhone5

I cant get call when i turn on my cellular data on iphone5. My carrier provides only 2G data. Can someone please help me?

Try resetting the iPod by holding the Menu and Center button for about 10 seconds. You should see the screen shut off and come back on with the Apple logo. If that doesn't work you'll want to try to restore the iPod through iTunes.

Similar Messages

  • Iphone 6 always hangs/stops working when i turn on my cellular data. i have already switched my sim card. It works perfectly on wifi

    iphone 6 always hangs/stops working when i turn on my cellular data. i have already switched my sim card. It works perfectly on wifi

    Which of the basic troubleshooting steps described in the User Guide - restart, reset, restore - did you try before posting?

  • I had my iphone 3gs unlocked so i could use it in Oz, however although i can phone works ok, i cant get internet, but i the option of Cellular Data Network does not appear with the new sim? Can anyone help pls?

    Hi Just wondered if anyone can help with the above question? I had O2 phone unlocked and bought a local sim card, but although the calls are fine i have no option for internet etc.  I have done searches and got the info details from the sim provider to activate, but  instructions say i go to : Settings; General; Network and then Celluar Data Network, but I dont get that option ?  When i put back my O2 sim card, the option reappears?
    Can anyone help me please? Off to Australia again soon and really could do with it working properly this time.
    Thanks everyone
    Ronnie

    Hi Ronnie, was wondering what brand sim card you bought?
    Was it from Telstra, Optus, Vodafone, Virgin or Mayasim?
    I have a 4 S running iOS 5.01 is there an option in Settings - Network - Carrier? As this should be set to the supplier of the sim card. In my Settings - Network there is no option for Celluar Data Network.
    What version of the iOS are you using?
    Some prepaid sim cards may not have a lot of data, so I suggest searching the companies websites for the best deals before you come here. Telstra usually have good plans. If you take your phone to the shop you purchased the sim card from they will usually set it up for you. 
    Telstra runs on a different frequency to others and offers the best coverage in Australia.
    Just for the record I am not an employee of any mobile company.

  • The method 'commit' cant be called when a global transaction is active.

    Hello,
    I've installed the SOAdemo a couple of times on local machines, and it works fine. Now I've deployed the SOADemo on a separate server and a strange error occurs in BPEL when testing the SOADemo.
    The SOAOrderBooking BPEL process runs into an error at the GetOrderId process:
    ================================
    file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_SOAOrderBooking_1.0_937b09d1bd8dae1b33b028b2871aef63.tmp/OrderSequence.wsdl [ OrderSequence_ptt::OrderSequence(OrderSequenceInput_msg,OrderSequenceOutputCollection) ] - WSIF JCA Execute of operation 'OrderSequence' failed due to: DBWriteInteractionSpec Execute Failed Exception.
    unknown failed. Descriptor name: [unknown]. [Caused by: The method 'commit' cant be called when a global transaction is active .
    ; nested exception is:
         ORABPEL-11616
    =================================
    I am using SOA Suite 10.1.3.0 and Database 10201, deployed on Windows.
    Can anybody tell me what can cause this problem?
    Thanks in advance,
    Regards Leon                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi,
    Hi, I am getting the same error using ESB Database Adapter.
    My faultstring is:
    ========================
    oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/my_ESB/myAdapter.wsdl [ myAdapter_ptt::myAdapter(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'myAdapter' failed due to: DBWriteInteractionSpec Execute Failed Exception.
    unknown failed. Descriptor name: [unknown]. [Caused by: The method 'commit' cant be called when a global transaction is active.]
    ; nested exception is:
         ORABPEL-11616
    DBWriteInteractionSpec Execute Failed Exception.
    unknown failed. Descriptor name: [unknown]. [Caused by: The method 'commit' cant be called when a global transaction is active.]
    Caused by Exceptoin [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
    Belső kivétel: java.sql.SQLException: The method 'commit' cant be called when a global transaction is active.Error Code: 0.
    ==========================
    (BTW, what has 'commit' to do with a procedure that is only reading the database?)
    Regards,
    Patrik

  • The plugin is gets called when we open any pdf document in internet explorer

    Hello,
    I have written plug-in( .api) for our use. But it's get called when ever I open any pdf document in internet explorer.
    I am using Adobe Acrobat 10. What could be the problem. I don't want to call plug-in methods on internet explorer.
    The plug-in method should call when am launch Adobe acrobat separately.
    Please help me to solve this issue.
    Regards,
    Sow

    Thanks for the response.
    I have written some function in PluginInit. I don't want to call the method when acrobat launches in IE. It should call only when acrobat launches in Desktop.
    How can I call the method only when it launches on desktop.
    Please help me to solve the issue.
    Sow

  • The method 'rollback' cant be called when a global transaction is active

    I receive the following error stack while dequeuing a message (aq adapter outbound) and forward the message to a database (database adapter inbound) within Oracle ESB 10.1.3.4.
    The database connection is dynamic using additional variables in the xlst transformation and putting the connection information (jndi name) in the xml doc:
    <xsl:variable name="JDBC_RESOURCE"
    select="/imp1:MixMatchMsg/imp1:Winkel/imp1:JNDI_NAME"/>
    <xsl:variable name="SET_DATASOURCE"
    select="ehdr:setOutboundHeader('/dhdr:OutboundDBHeaderType/dhdr:dataSourceName',$JDBC_RESOURCE,'dhdr=http://xmlns.oracle.com/pcbpel/adapter/db/;')"/>
    An unhandled exception has been thrown in the ESB system.
    The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException:
    esb:///ESB_Projects/mixmatch_MixMatchESB/WriteWinkels.wsdl
    [ WriteWinkels_ptt::merge(IntMixMatchCollection) ]
    - WSIF JCA Execute of operation 'merge' failed due to: DBWriteInteractionSpec Execute Failed Exception.
    merge failed.
    Descriptor name: [WriteWinkels.IntMixMatch].
    [Caused by: The method 'rollback' cant be called when a global transaction is active.]
    ; nested exception is:
         ORABPEL-11616
    DBWriteInteractionSpec Execute Failed Exception.
    merge failed. Descriptor name: [WriteWinkels.IntMixMatch].
    [Caused by: The method 'rollback' cant be called when a global transaction is active.]
    Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602))
    : oracle.toplink.exceptions.DatabaseException
    Internal Exception: java.sql.SQLException:
    The method 'rollback' cant be called when a global transaction is active.Error Code: 0.
    at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:644)
    at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:739)
    at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:927)
    at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:842)
    at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:865)
    at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:231)
    at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:138)
    at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:411)
    at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:169)
    at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Bu
    The payload looks as follows:
    <top:IntMixMatchCollection xmlns:top="http://xmlns.oracle.com/pcbpel/adapter/db/top/WriteWinkels">
    <top:IntMixMatch>
    <top:nummer>1</top:nummer>
    <top:omschrijving>C1000 Tandenborstels: 3 voor 2.56</top:omschrijving>
    <top:kassabonOmschrijving1>Tandenborstelactie</top:kassabonOmschrijving1>
    <top:kassabonOmschrijving2>3 voor 2</top:kassabonOmschrijving2>
    <top:aantalPerKlant>2</top:aantalPerKlant>
    <top:begindatum>2009-03-16</top:begindatum>
    <top:einddatum>2009-03-21</top:einddatum>
    <top:mixMatchGroepNummer>1</top:mixMatchGroepNummer>
    <top:mixMatchGroepOmschrijving>WK 200912 Mix matchess</top:mixMatchGroepOmschrijving>
    <top:intMixMatchDsCollection>
    <top:IntMixMatchDs>
    <top:volgnummer>1</top:volgnummer>
    <top:aantalTeNemenArtikelen>3</top:aantalTeNemenArtikelen>
    <top:omschrijving>C1000 Tandenborstels</top:omschrijving>
    <top:kortingToerekenenJn>J</top:kortingToerekenenJn>
    <top:bedragTeBesteden>1.23</top:bedragTeBesteden>
    <top:kortingwaarde>2.56</top:kortingwaarde>
    <top:mixMatchNummer>1</top:mixMatchNummer>
    <top:intMixMatchHfdgrInDsCollection>
    <top:IntMixMatchHfdgrInDs>
    <top:hoofdgroepnummer>16</top:hoofdgroepnummer>
    <top:mixMatchNummer>1</top:mixMatchNummer>
    <top:mixMatchDoosVolgnummer>1</top:mixMatchDoosVolgnummer>
    </top:IntMixMatchHfdgrInDs>
    </top:intMixMatchHfdgrInDsCollection>
    <top:intMixMatchArtikelInDsCollection>
    <top:IntMixMatchArtikelInDs>
    <top:artonnummer>10010205</top:artonnummer>
    <top:actieInkoopprijsEncrypted>6C1407B28B5B7EDC</top:actieInkoopprijsEncrypted>
    <top:uitsluitenJn>J</top:uitsluitenJn>
    <top:mixMatchNummer>1</top:mixMatchNummer>
    <top:mixMatchDoosVolgnummer>1</top:mixMatchDoosVolgnummer>
    </top:IntMixMatchArtikelInDs>
    </top:intMixMatchArtikelInDsCollection>
    <top:intMixMatchHfdsubgrpInDsCollection>
    <top:IntMixMatchHfdsubgrpInDs>
    <top:hoofdsubgroepnummer>82</top:hoofdsubgroepnummer>
    <top:mixMatchNummer>1</top:mixMatchNummer>
    <top:mixMatchDoosVolgnummer>1</top:mixMatchDoosVolgnummer>
    </top:IntMixMatchHfdsubgrpInDs>
    </top:intMixMatchHfdsubgrpInDsCollection>
    </top:IntMixMatchDs>
    </top:intMixMatchDsCollection>
    <top:intMixMatchTijdCollection>
    <top:IntMixMatchTijd>
    <top:dagnummer>1</top:dagnummer>
    <top:begintijd>0001-01-0112.23.00</top:begintijd>
    <top:eindtijd>0001-01-0114.45.00</top:eindtijd>
    <top:mixMatchNummer>1</top:mixMatchNummer>
    </top:IntMixMatchTijd>
    </top:intMixMatchTijdCollection>
    </top:IntMixMatch>
    </top:IntMixMatchCollection>
    Anybody any idea what could be wrong?
    Any ideas for a workaround/solution?

    I encountered this error while trying ADF tutorial CH10 - Developing an Edit Page, after changing some data on the Edit page and click on Save, the error appears on top of the page. The roll back was called implicatly by ADF, per stack trace msg it seems to come from failing to commit and then failing to roll back. Not sure why this is happening, please advise.
    WARNING: The method 'commit' cant be called when a global transaction is active. [TopLink Warning]: 2006.12.27 12:14:39.963--ClientSession(29795927)--Thread(Thread[HTTPThreadGroup-6,5,HTTPThreadGroup])--Local Exception Stack:
    Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
    Internal Exception: java.sql.SQLException: The method 'commit' cant be called when a global transaction is active.Error Code: 0....
    at QPPublicFacade_LocalProxy_4ogao92.mergeEntity(Unknown Source)<----------> WHAT may cause mergeEntity failed??

  • How to make a functions that gets called when the plug in is loaded?

    I'm making an automate plugin, and I want to make a functiosn that gets called when Photoshop loads my plugin. It doen't matter if my plug is never called fro the File->Automate menu. Is there any way to do this? Thank you.
    Daniel

    Hi There,
    I don't believe there is a way to handle this currently within App-V...Other virtualization products do have the ability to exclude processes and force to run outside or the bubble or exclude them from terminating on shutdown.
    It would be a great feature request for a future release. You can easily request it here:
    http://appv.uservoice.com/forums/280448-microsoft-application-virtualization
    PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
    rorymon.com Twitter: @Rorymon

  • I have been getting this message " no sim installed " too many times then my phone goes off , its iphone 4S , its really a problem i cant get calls or anything and im not sure how to take the SIM out then insert it again , what to do ??

    i have been getting this message " no sim installed " too many times then my phone goes off , its iphone 4S , its really a problem i cant get calls or anything and im not sure how to take the SIM out then insert it again , what to do ??

    Use the sim tool that came with your phone or a safety pin and just insert it into the hole at the side of the sim tray and push it in and then pull it out.  It is no more difficult than that and then just close it again.

  • Ever since the ios8 updates i cant do calls when i need to or when someone tries to call me or facetime me i would try to accept and it would say connecting or end it. like *** it screwed up my phone. and my apps always crash

    ever since the ios8 updates i cant do calls when i need to or when someone tries to call me or facetime me i would try to accept and it would say connecting or end it. like *** it screwed up my phone. and my apps always crash

    The process may vary among phones, but on the Bionic:
    Power down phone
    Hold volume up/down & power simultaneously
    Use volume down to navigate to 'Recovery', use volume up to select
    Should see screen with triangle and exclamation point next to an Android
    Press volume up/down simultaneously
    Use volume rocker to navigate to 'wipe cache' and use power button to select
    Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select

  • How come I get 3G when I turn off my LTE?

    How come I get 3G when I turn off my LTE but when my friends turn their LTE off they get 4G? I have Verizon as my phone's carrier.

    Because you have a Verizon iPhone and when you turn off LTE it falls back to their EVDO network and correctly shows 3G. Your friends either have a T-Mobile or AT&T iPhone and they refer to HSPA+ as "4G".
    A Sprint iPhone will behave exactly like yours.

  • Getting error when i am creating and tesing data server in ODI

    Hi,
    Getting error when i am creating and tesing data server in oracle (Physical Architecture) in topology manager ODI.
    Please anybody help me on this.
    Java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.pm.s(pm.java)
         at com.sunopsis.graphical.l.pm.g(pm.java)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
         at java.awt.Dialog$1.run(Dialog.java:1046)
         at java.awt.Dialog$3.run(Dialog.java:1098)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Dialog.show(Dialog.java:1096)
         at java.awt.Component.show(Component.java:1563)
         at java.awt.Component.setVisible(Component.java:1515)
         at java.awt.Window.setVisible(Window.java:842)
         at java.awt.Dialog.setVisible(Dialog.java:986)
         at com.sunopsis.graphical.l.pm.q(pm.java)
         at com.sunopsis.graphical.l.pm.<init>(pm.java)
         at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
         at com.sunopsis.graphical.frame.bo.w(bo.java)
         at com.sunopsis.graphical.frame.bo.d(bo.java)
         at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Thanks,
    Krish

    So are you getting the same error when you try from the installed agent or the tool (Local agent)? Is your agent on the same machine or different machine. If so, does that particular machine can connect to the database?
    Also, are you using the same JDBC driver that you are using in SQLDeveloper? Same URL?
    Typically, connection refused error appears with wrong instance or wrong port. Try telnet-ing the in the database server and db port. See what happens there!!! The java stack that you provided here is not an SQL exception, it is related to socket creation. It has less to do with JDBC and more to do with physical resources like machine, port and permission.

  • Getting error when i am creating and tesing data server in oracle (Physical

    Hi,
    Getting error when i am creating and tesing data server in oracle (Physical Architecture) in topology manager.
    Please anybody help me on this.
    Java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.pm.s(pm.java)
         at com.sunopsis.graphical.l.pm.g(pm.java)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.pm.a(pm.java)
         at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
         at java.awt.Dialog$1.run(Dialog.java:1046)
         at java.awt.Dialog$3.run(Dialog.java:1098)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Dialog.show(Dialog.java:1096)
         at java.awt.Component.show(Component.java:1563)
         at java.awt.Component.setVisible(Component.java:1515)
         at java.awt.Window.setVisible(Window.java:842)
         at java.awt.Dialog.setVisible(Dialog.java:986)
         at com.sunopsis.graphical.l.pm.q(pm.java)
         at com.sunopsis.graphical.l.pm.<init>(pm.java)
         at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
         at com.sunopsis.graphical.frame.bo.w(bo.java)
         at com.sunopsis.graphical.frame.bo.d(bo.java)
         at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
         at java.awt.Component.processMouseEvent(Component.java:6263)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
         at java.awt.Component.processEvent(Component.java:6028)
         at java.awt.Container.processEvent(Container.java:2041)
         at java.awt.Component.dispatchEventImpl(Component.java:4630)
         at java.awt.Container.dispatchEventImpl(Container.java:2099)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
         at java.awt.Container.dispatchEventImpl(Container.java:2085)
         at java.awt.Window.dispatchEventImpl(Window.java:2478)
         at java.awt.Component.dispatchEvent(Component.java:4460)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    HI,
    check the jdbc url.
    The datbase and the listener to which you are connecting are suppose to be up and running.
    For testing try and connect using sqlplus from the machine you are trying to make a connection,
    Reshma

  • My 3gs keeps switching itself off and when i turn it on, the date is set to 1st January 1970

    I Have an Iphone 3gs that keeps switching itself off and when i turn it on, the date is set to 1st January 1970 :S   ... many software resets and updates won't do any good .. repaired at the manufacturer twice for the same, and works till it happens again on it's own. When it was repaired, the fix was mentioned as a reset done for the device. I have a friend who is alse havng same issue.
      can someone tell what is the reset that can be done to tr and do it from my end plzzz?

    Sounds like the battery is dead.  Bu try the following to rule out a software problem:
    - Reset the iPOd
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.
    If still problem your battery is very likely dead.  An appointment at the Genius Bar of an Apple store is in order.

  • When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself.

    I have had a problem with my iphone 4s for some time now but I have just been so busy to try and fix it. When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself. However, even though it says the data is on, I can’t use the data when I don’t have wifi. I tried restoring my phone a few times and the last time I did that, it wouldn’t turn my service on so I had to talk with a Verizon agent for a long time trying to fix it and finally they simply sent me another phone. I thought hey new phone, this part will be fixed. However, I got my service to work but it’s still the same problem with the cellular data. I have just left it alone and not worried about it, but it’s still not fixed and thought I could ask on here if anyone had any ideas. It has something to do with the apps actually installed on the iphone. Apps like the mail, safari, settings, itunes apps, etc. All my other apps turn on and off just fine. Does anyone have any ideas?

    Read the User's Guide... it covers how to backup and sync the device as designed.

  • I can't turn off my cellular data for facebook

    I tried to turn off my cellular data for Facebook, but it is on when I check it immediately...
    I tried...
    Settings >> Cellular >> Faceboook
    and
    Settings >> Facebook >> Settings >> User Cellular Data
    both doesn't work. I also tried Settings >> General >> Reset >> Reset Network Settings. then try again. But it doesn't work.
    Any idea or solution?
    It is the same for the F#$% Facebook Messanger

    go to setting---->general----->accesories----->turn of accesotive touch and then

Maybe you are looking for

  • Program error message when trying to open photoshop cc

    I downloaded photoshop cc when I had snow leopard (10.6.8). It opened at first but subsequently when I tried to open it I get a program error message. I uninstalled and reinstalled while I still had snow leopard and it still wouldn't open. Now I  hav

  • Bluetooth mouse and keyboard do not work

    I purchased an iMac G5 about 6 months ago. I got it with a bluetooth mouse and keyboard. I have had trouble with it from day 1. Apple had me replace the logic unit, and it worked for a couple of weeks. Then as soon as the 90-day warranty for complime

  • Windows 7 x64 / DM 6.0 b47 - DM hangs on exit

    Hello! I am running Windows 7, 64-Bit, with all of the latest updates and patches.  I also have downloaded and installed the latest version of Desktop Manager 6.0 (b47). DM seems to work fine - I can launch it, use it, connect to the Blackberry, sync

  • Missing ACPI\TOS6205 Driver

    I have a Z930 laptop. Installed clean Windows 7x64. And missing one driver.ACPI\TOS6205 as unknowndriver. After some searching this comes up as a BT ACPI driver. I was able to find a driver on line and after installing the driver is properly indentif

  • 2 iPod in same iTunes

    My sister has iPod and iTUnes for it. I bought my own iPod and problem is that when i connect my iPod, iTunes starts, as normal but then it starts to load my sister music to my iPod. Should I make to profiles or what? Please clear english.