I cant get my iphone to work with my time capsule

It flat out does not see it. Any tips or tricks from you smart folks?

I agree with what Nick said. Posted below is a recap on what to try plus some suggestions. Feel free to call Apple Support for assistance on configuring or checking out settings in the Time Capsule.
1. Ensure that the router is running in a 2.4GHZ mode
2. Ensure you are running in either 802.11 b/g mode or 802.11n (802.11 b/g compatible)
3. Check to see if you are using Mac Address Filtering
4. If needed ensure you are using WEP 128 bit or at least WPA/WPA2 security
Also in rare cases adjusting the radio channel may add better performance as well

Similar Messages

HT4759 i cant get my iphone to sinc with my husbands Iphone or my laptop???

When using shared calendars, I cant get my iphone to sync with my laptop icloud calendar or the calendar my husband and I use on our Iphones.

If you have multiple calendars on your phone, you might check to be sure you are adding the events on your phone to the shared calendar you are trying to sync with, and not some other calendar such as On My iPhone, From My Mac, a Google, Yahoo or exchange calendar, etc.

Stuck on ask a question page. cant get anything I can work with

I had a page with bookmarks then it all disappeared and now all I have is a page titled at top --- Ask a Question Firefox Support/Mozilla Firefox. there is nothing on the page I can work or remove . I can see the page I want but cannot get to It.

DITTO to what aehplh4423 posted 3 months ago on this thread.
as follows:
"stuck on ask a question page. cant get anything I can work with
I had a page with bookmarks then it all disappeared and now all I have is a page titled at top --- Ask a Question Firefox Support/Mozilla Firefox. there is nothing on the page I can work or remove . I can see the page I want but cannot get to It. "
WHAT'S UP FIREFOX?????????
If you don't have an answer, then how do I get back to my previous version of Firefox with my home page and bookmarks? Or do we just need to go back to Explorer or Google Chrome?

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

Set up your "main" router to use the OpenDNS servers, and the Time Capsule will automatically pick up those settings. No configuration is needed on the Time Capsule.

HT4623 i cant get my iphone to vibrate with ios7

How can i get my iphone to vibrate with ios7?

Imhavingsame prob. Dontgetvibration w calls or msgs. Very disturbing. Jam alsonotgetting incoming call sounds. In settings I have everything properly set I think.

Photosmart C4780 won't work with new Time Capsule

All of our household machines (2 MacBooks and 1 iMac) worked just fine to print wirelessly to our HP Photosmart C4780 with our time capsule, 1TB. The hard drive on that failed, and we replaced it with a new 2 TB model. Everything runs fine off the new wireless network except for the printer. The printer is not hooked to the Time Capsule, and I don't want it to be as it's in an odd location. The printer worked just fine before, off by itself in a corner, not hooked to any computers or Time Capsule. We are running OS 10.8 on 2 machines and OS 10.6 on another. I've read every troubleshooting article and community post I can find, trying everything, and no luck. I've restarted everything. I've reset the printer network settings. I've deleted all printers from the computers, but in every case, the printer cannot be detected on the wireless network. I run the Print & Scan utility in System Preferences, and the printer is not located. I run the HP Setup Assistant, and it can't find the printer. If I hook it up via USB to any machine it works fine, and I even tried running the HP Setup Assistant to setup wireless via USB, and that can't find the wireless network either. The Time Capsule is on all default settings, exept I changed the name and password. Neither has any special characters. I tried the suggestion of channel 11 and that didn't work. I printed out the wireless network test report, and the Network Name (SSID) Found diagnostic failed. I printed out the HP Network Configuration Page and it says network Offline, URL for embedded web server is http://0.0.0.0, and the 802.11 Wireless status is Disconnected. At the bottom where it lists the Number of 802.11 networks discovered, my home wireless network is at the top of the list. I know wireless is enabled on my printer because I've disabled and enabled it, plus the blue light is on above the wireless icon.
I cannot think of anything else to try and I'm about to launch the printer out the window! Please help in any way.

You're close. After opening Airport Utility/TimeCapsule/Edit, look at the bar at the TOP of the page for Airport Utility, not at the top of the inset box. That Base Station drop down has the WP Printer option. I'm using 6.3.2. Try that.

Cant get my printer to work with Windows Vista

I have a Deskjet 932C printer. I bought my computer 2 years ago and my printer worked just fine with Windows Vista. We just moved so I had to take everything apart and put it back together. Now I cant get my software to install that came with my printer and when I plug the USB cable in its not reading that there is new hardware. Can someone help me???

shortyk wrote:
I have a Deskjet 932C printer. I bought my computer 2 years ago and my printer worked just fine with Windows Vista. We just moved so I had to take everything apart and put it back together. Now I cant get my software to install that came with my printer and when I plug the USB cable in its not reading that there is new hardware. Can someone help me???
If the printer was installed previously then you would not detect new hardware when plugging the printer in. Go to Start, Control Panel, Printers and check for an existing Deskjet 900 series printer. If this printer exists in the list double click on it and check to see if the printer is shown as offline or paused. If so correct the issue by clicking the appropriate line.
If the printer does not show as installed then install it as shown here. If this does not correct the issue then unplug the USB cable, then go to the device manager and delete the ports associates with the USB printer and allow the system to rediscover the USB devices.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How can I get my Iphone to work with UCONNECT?

How can I get my iphone 4s running IO7.0.4 to work with my UCONNECT system in my 2013 Chrysler?
I have talked to UCONNECT and the tekkie said "you will have to live with it because your phone is too advanced for our software and we do not have an update planned." I prress the "connect" button on the steering wheel and tell the phone to call a person on mobile. I says it cannot call "somebody else" as they do not have a mobile number. But the person it says is not the person I said.
It is like it is not reading the phonebook correctly.

Everything worked perfectly until I updated to IO 7. Then it went out the window. I cnnot be the only person with this problem and hopefully someone out there has overcome this problem. If you just stop at the first NO we would still be flipping our phones open.

Cant get motif XF8 to work with logic 9

I cannot get my motif XF8 to work with Logic 9, nor is it working with any other DAW. I have used the motif since last summer and it has always been hit or miss with MIDI. Sometimes it works, other times it doesn't. The cord is connected appropriately. I am mystified, and embarrassed to admit that I really don't get MIDI at all. I have a Macbook pro that is a year old or so. Please help.

Uh . . . . . I had to adjust Motif as in Utility/Control then set the MIDI In/Out to USB. I felt very silly when I found this out.

Cant get the iPhone to work

So my dad recently go the new iPhone 4s and decided to give me his old iPhone 4. However he has a different network than i do and my sim does not work with the phone. What can i do about this or is this phone useless to me now?
Thanks

FusionBlaze wrote:
Ah im in Canada. So this phone is useless, that's a shame.
You would have to ask the carrier if they will unlock it.

Cant get Apple TV to work with 5200ES receiver.

I'm hoping someone can help me understand what isn't working correctly here. I have a 5200ES receiver which is connected to an (old but nice) Fujitsu panel with a DVI input via an HDMI to DVI cable. I have other devices - Xbox360, Wii - connected via component video, and a Sky HD box connected via HDMI1. My 5200ES is curently set up with two front speakers connected in bi-amp mode (i.e. rear channels used to drive the bass/mid, front channels the treble), a centre channel and a sub. I have no problems with picture and sound from existing devices; although, in some circumstances, notably with the Xbox 360 playing movie trailers and some movies using the Amazon Prime app, I have had a 'tinny' sound that only seems to come from the treble of the left and right channel. But some other movies worked fine and I don't know why. I bought an Apple TV and plugged that in via HDMI2. I got no picture or sound. I used the Apple TV remote to cycle through available screen resolutions and couldn't get any picture, although occasionally got the message 'out of range' and occasionally got a flash of a screen with an Apple message on it, before either getting screen noise, or a black screen. Still no sound though. Eventually I went into the 5200ES menu and changed the screen output to 720p and managed to cycle the Apple TV to a 720p resolution and I got something on screen (having said that, next time the Apple TV went to sleep I was then unable to get back to any screen at all). But no sound so I attached an optical cable to the back of the Apple TV and to the OPT 3 input at the front of the receiver (as the only digital input I could share with HDMI2). I then got sound, but again this was only tinny and came from the tweeters of the bi-amped front speakers. Basically unusable. As a test, I connected the Apple TV to the HDMI-DVI cable into my Fujitsu plasma panel and it immediately dislayed a screen. No sound, of course, but that should be handled by the receiver anyway. I also took the Apple TV into our kitchen to plug it into a small Samsung LCD TV we have there that has an HDMI input. It worked faultlessly and displayed content with full sound immediately as you would expect. So, in summary I am not able to reliably switch the HDMI input of the Apple TV into my panel and see its output, nor hear sound from HDMI or usable sound from optical (which I shouldn't need of course, and looks unsightly with the extra cable draped over the front of the receiver). However, another HDMI device, being my Sky HD box, works perfectly. As it stands I can't use the Apple TV through my Sony 5200ES, so I'd appreciate any advice and guidance on what to do. I can only assume I will solve the sound problem by switching off the BI-AMP option as that doesn't work with all material or sources, and may allow me to get rid of the optical cable, but still have an unreliable screen display and can't easily switch between video sources until I know what to do.

Hi peter_964rs,
Thank you for your message. Unfortunately, we are unable to assist customers outside of the US. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/. >Joffrey
If my post answers your question, please mark it as "Accept as Solution"

WiFi no longer working with new Time Capsule-can you help please?

Hi all,
Just received my new Time Capsule (TC). It was a little problematic setting up, but probably due to my now choosing to increase my security from WEP to WPA as the TC set-up assistant suggests. Since then, I have had numerous problems getting my other computers and now my iPhone to connect with WiFi.
The problem is that despite entering all the new settings and WPA passwords for my connection with the TC, the iPhone will either momentarily recognize and go to wifi or simply stay on Edge.
On the former, with wifi active, as soon as I go to iTunes, Safari or check email, it reverts to Edge. On the latter, despite resetting, entering password, or tapping Settings and selecting my wifi connection, it will NOT connect and stays on Edge.
(Now, I'm on Edge! I'm bummed that with new hardware I have new problems that didn't exist before!)
Can someone who had this same problem tell me how they resolved it.
Here's the one clue I have, but would rather not resort to: When I first set up the TC, I had it on WEP with a WDS Network, and everything was working great and FAST! Now that I have increased the security—I will be backing up 3 computers to the TC—my iPhone and other computers seem to have intermittent or no wifi connection as a result.)

Irving Gonzales,
If your computers are 802.11N capable, you might want to try an advanced setup that might help your Time Machine speeds some. I have not personally tested it, so it is just a personal theory at this point.
First, in a mixed environment the 802.11N clients all get slowed down.
First, configure the TC for 802.11N only.
Second, connect the Airport Express via ethernet to the Time Capsule
Third, configure the Airport Express for bridged mode (doesn't give out IP addresses), and for its own wireless network with a different name than the Time Capsule.
Have any 802.11b/g clients like the iPhone join the Airport Express' network.
Thank you,
Nathan C.

Bt Home Hub (fibre optic) can it work with my Time Capsule & Airport Express?

I have just moved house after having no problems for years with my virgin cable I have now had to switch to Bt because cable is not available at my new address therefore I would like first and foremost to have my Time Capsule available to use as a hard drive, I am not too bothered about wi-fi as that comes from the bt hub, only thing is I am at a loss how the Time Capsule hard drive is not working. Also is there anyway the Bt Hub can connect/link to Time Capsule or even Airport Express.

Your TC can be used bridged to the BTHub.. and plugged in by Ethernet.
It is best to still use the TC wireless for the express to extend and you will find access easier.
Always best to start with a factory reset when you do this.. The TC remembers too much from its last configuration.

Wifi Working With New Time Capsule But Can't See It To Configure Settings?

I had an airport extreme but recenlty purchased an airport time capsule. When I initially plugged it in, by airport utlity saw it and it asked me to set up a password. But then I noticed there was no internet signal getting to the time capsule. We wound up replacing the DSL Router and now the internet is up and running. But now when I open the airport icon, the time capsule doesn't even show up. When I open the airport utility through finder it shows the time capsule but blocks me from accessing anything. So I can't go into any set up configuration for changing passwords, setting up guest network or setting up the back up to the time capsule. I don't see any downloads for a new utility for the time capsule, so I'm assuming it's the same as for the airport extreme? What do I need to do in order to be able access the configuration areas?

Reboot the TC.. it is hard for poor OSX to find it.
No luck.
Just press reset and start again.
Do a new clean setup.. please use all SMB names this time, short, no spaces and pure alphaumeric.
Ensure ipv6 is set to link-local on both the wireless and ethernet if you use it. Wireless is essential even if you use ethernet you cannot do setups without wireless.
Still got trouble??
What is the OS on the computer and therefore version of the airport utility.. you will have huge problems with Mavericks.. as that is its nature.

I cant get my iphone to work with my time capsule

Similar Messages

Maybe you are looking for