I cant get my ipod to update

i am trying tu update my ipod software to 5.0 but when i do it tells me that the connection times out i look at my downloads and it says err=-3259 what do i do?

Disable your firewall, then try it again.
If that doesn't work, disable your antivirus as well.

Similar Messages

  • HT5192 i cant get my ipod touch to update to the iOS 5 what do i need to do

    I cant get my ipod touch to update what can i do

    If you haev a 1st gen or 2nd gen ipod, then you can do nothing.
    Maybe if you were to give some information, some could help.
    What ipod model?
    What Computer OS?
    What current version of ios?
    What itunes version?
    What happens when you try to update?

  • Trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    trying to update my ipod but i get the error message network timed out.  I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

    Try the manual method specified here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • HT1369 i cant get my ipod to connect to itunes or my laptop

    i cant get my ipod to connect to my laptop or itunes i have unistalled and reistalled itunes but this doesnt help at all

    Hello, waynemclno1.
    Thank you for the question.  Try the steps in the article below to troubleshoot your iPod touch not being recognized in iTunes.  I would recommend seeing the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • I cant get my ipod to sync my computer

    i cant get my ipod to sync with my itunes on my laptops

    Is there an iTunes error?
    is your iPod recognized by itunes?

  • HT3204 I cant get my Ipod to sync...my comp. makes a double noise when i try

    cant get my ipod to sync

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Maybe:
    Win 8 TS1538 Ipod not syncing: Apple Support Communities

  • TS1702 i cant get my apps to update on my iphone 4s , it keeps saying waiting then loading then it goes back to waiting ... and ive already pwr off an on

    cant get my apps to update ... it keeps saying waiting then loading then waiting again ,,..ive already pwr off an on multiple times and i dont want to uninstall and reinstall because ill loose my status on my game apps

    Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
    Also, make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
    If that doesn't do it, try resetting or restoring the iPhone.

  • HT2204 cant get app store to update new id at purchase sighn in

    changed in settings got all working good but at the last stage the email apple id is prefilled and it cant be changed
    cant get app store to update new id at purchase sighn in

    It obviously depends on what Mac you have.
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • TS3694 i have dropped my iphone4 . i cant get to the software update the error has occured  wt can i do

    i have dropped my iphone4 . i cant get to the software update the error has occured  wt can i do for software update

    What is the exact wording of the error message received?

  • I cant get my computer to update the os x software

    i need help!!! i cant get my software to update anymore. and now i need to update to a newer version of os x (10.5) but i cant get my computer to do it. can anyone help me?!!!!

    OS X 10.4.x won't update to 10.5
    10.5 won't update to 10.6
    and 10.6 won't update to 10.7
    Not without paying for it and meeting the hardware requirements.
    Please tell us your hardware so we can tell you how far you can go.
    Sometimes older versions of OS X are no longer supported even though the computer still works perfectly fine.
    You might have to accept what you got or buy a new machine and use the older one for something else that doesn't need to be updated anymore.

  • I cant get my ipod to slide it just saids tap, can anybody help, i cant get my ipod to slide it just saids tap, can anybody help

    i cant get my ipod to slide,all it saids is tap and some body help me please.

    - Try resetting the iPOd.  Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next, connect to yor computer and go to iTunes>The Summary pane for the iPod>Configure Universal Acess and see if an accessibility feature is turn
    d on.  Turn off and then try
    - Restore the iPod from backup
    - Restore the iPod to factory defaults/new iPod.

  • Cant get my ipod clasic to show up on itunes

    cant get my ipod clasic to show up on itunes

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • I've forgotten my passcode and when trying to restore it I get "The iPod software update server could not be contacted"

    I recently had my iPhone taken away from over-use so I thought I'd just use my iPod I haven't used in forever, when turning it on it said locked for 21 million minutes, so I checked out few videos, fix it on iTunes, and when I could access my iPod, my mind went complelty blank, so I checked out so more videos on what to do when fogetting your passcode, and I found you had to restore your iPod, which was fine by me because, I have maybe an app or two on it, so wiping everything out wouldn't be anything.. But, when I go to restore my iPod I get, like in the title, "The iPod software update server could not be contacted" any ideas on what to do?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • How can I get my iPod to update when it says the server cannot be connected?

    Whenever I try to update my iPod it says, "The iPod software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." It does this every time. How can I get it to update? Any help is much appreciated, thanks!

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Still cant get my ipod to work...

    My earlier post: http://discussions.apple.com/thread.jspa?threadID=971361
    I still cannot get it to work, I have tried everything. I have reset and restored my ipod multiple times. Thinking about sending it back soon. I get that same error every time I try and put music on my ipod, sometimes it works...and sometimes it wont. Sometimes I cant get a certain song to go on, and then another time it will.
    All my music was on my computer before I had my ipod. It was all either from cds or downloaded. A friend has also sent me tons of music that works on his ipod fine.
    I have always used Winamp to listen to my music, and still do. Could that have anything to do with it? Or made it another format?
    Very annoying, anyone have any clues?
      Windows XP Pro  

    Did you read the link that StarDeb55 provided? It sounds like a local disk problem. Can the Windows Defrag utility run with out errors? Is your music library shared? i.e. Do multiple applications use the files. Like say Windows Media Player and iTunes. If so the other program(s) may be locking the file(s) preventing iTunes from coping it.
    P.S. If you are new to forums creating duplicate threads is generally considered a no-no and makes it less likely that people will respond to your post.

Maybe you are looking for

  • Can't print to shared c4640 from network.

         I have a c4640 connected by usb to a windows 7 x64 machine and can't print to it from any computer on my network (one is a vista 32 bit and one is windows 7 x64).  The networked computers don't show the printer in the add printers list, but it i

  • Error when using Javascript to scroll page in iFrame

    Hi again! I'm using a small Javascript to control the scrolling of a page loaded in an iFrame: <script type="text/javascript"> var timer_id; function scroll_iframe(frm,inc,dir) {   if (timer_id) clearTimeout(timer_id);   if (window.frames[frm]) {    

  • How to show BCS ECT values in list dropdown column programmatically?

    Hi, I'm working on web application which is completely developed by SOM. Now I have created (BCS) External Content Type which contains few columns . I know how to get this values directly in list but I need those values in new form (application page)

  • Several format in a timeline ?

    Hi folks, I was wondering in FCP could in anyways handle several video format in a timeline without rendering ? I hate the red line even in the quad. I am postproducing a film that will be made mostly from archival footage, delivered from several sou

  • Clarification on creating a Physical Standby Database

    I'm practicing with data guard with Oracle 10.2.0.1.0 on two Windows 2003 servers. I'm in the process of creating a physical standby database by following the steps outlined in the guide http://www.filibeto.org/sun/lib/nonsun/oracle/10.2.0.1.0/B19306