I cant get my K7n2 Delt-ILSR to see my single WD sata drive.

I am tryting to load windows on my new machine. I bought one 120 gig WD sata drive as my only hard drive. Each time I try and load windows, I get the message that windows does not see a storage devise. I am hitting F6 to add the driver off the floppy that came with my board. Does the sata function on this board require that 2 sata drives be installed? I thought that Just having one sata drive should work.
Amd 2500 Barton
Wester Digital 120 G sata drive
400wat power supply
256 meg Evga 5500 Gforce Fx
2 512 DDR 400 in slots 1 and 3 for dual channel

I bought the same board as you over this last month, and the drivers that come with the board were the wrong ones (for windows2000 at least, but it could be the same for winXP as you're having exactly the same problem I was).
The drivers I used that worked are at: http://www.msi.com.tw/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=sata48N.exe

Similar Messages

K7N2 Delta - ILSR & Hitachi T7k250 no go?

Hello!
My K7N2 Delta ilsr doesn't recognize hitachi's SATA II disk. Bios version is 7.60.
Disk works fine on DFI Lanparty NF3 250GB and is set on SATA I mode (I've checked with Hitachi's FTool).
Is there anything i could do or shoud i change the disk for other brand (I was thinking WD 2500KS - also SATA II)

Quote from: jan3z on 20-April-06, 05:20:13
Hello!
My K7N2 Delta ilsr doesn't recognize hitachi's SATA II disk. Bios version is 7.60.
Disk works fine on DFI Lanparty NF3 250GB and is set on SATA I mode (I've checked with Hitachi's FTool).
Is there anything i could do or shoud i change the disk for other brand (I was thinking WD 2500KS - also SATA II)
helo. disk work fine with the same mobo.(2xHITACHI 80gb SATA2 in RAID) latest BIOS for your mobo is 7.8 version. try update to it. im using my modded BIOS on this board.

K7N2 Delta-ILSR can't get IEEE 1394 working

My Mainboard K7N2 Delta-ILSR nForce2 Ultra 400 (601-6570-030)
I can't ever remember seeing the onchip 1394 controller settings in Bios.
I do remember seeing it in windows XP before I reflashed the bios to ver 7.6 using Live Update, I have read about problems with the mainboard not likeing the FX5900 Video cards, so I thought I would update the bios to save any problems.
I then re-installed XP and thought nothing of it. Everything was running well intil I wanted to do some video capturing from my camcorder. I then realised that there where no 1394 drivers installed and no controller could be found. I read the manual and it said to set the 1394 controller in Bios to Auto. When I went to Bios there was no onchip 1394 controller shown in the intergrated peripherals or any where else in Bios.
Can someone suggest what to do next please?

Try the followin steps
Hit the DEL key to go to the BIOS SCREEN
goto LOAD BIOS SETUP DEFAULTS and press ENTER
press F10 to save it to BIOS.
NOW again go to the BIOS and go to the INTEGRATED PERIPHERALS check out whether there is ONCHIP 1394
All the Best !

HELP me with my K7N2 delta ilsr

Can anyone help me with this problem. I have just upgraded to MSI's K7N2 delta ilsr motherboard. Its all working quite well apart from the fact that the pc wont start up from cold....at all.
When I start the pc from an off state, it runs up the fans and drives, but does not post.
The diagnostic led pannel on the back of the pc shows that the cpu is faulty or not installed correctly.
If I then press the reset button, the pc posts, and boots up just fine.
It does this EVERY time I start up.
I have tried re installing the cpu, which is an XP 2800+ 333 barton, but to no avail.
I have asked a few questions on other forums, but I cant solve it.
These are the suggestions so far.
1. the psu (I have a Tsunami 400 atx psu) could not be giving out enough power on initial startup, but once the pc is running, it has enough to boot the pc from a reset.
2. The mobo or the bios could be at fault. I have not flashed the bios, or upgraded it in any way from original, so is there an issue with the original bios on these boards, and 2800 barton chips??? Could it be a mobo fault? The pc runs fine once the machine is booted.? how do I test it?
3. The cpu could be faulty? but would this not stop it running fuull stop?
4. my ram. I have a single stick of OCZ 512mb pc3200 ddr, which I was told would make the pc fly. Not shure on that statement, but is this ram compatible?? could this be the problem?
Im fairly new to the upgrade side of things, and I need some help with this one.
Also, Id be really greatfull if some one could talk me through flashing my bios to the latest version, as the thought of doing this narks me a bit...I dont want to mess it up and get a dead pc...
HELP

+3.3v 14A
+5v 28A
+12v 16A
+5vsb 2A
-5v 0.5A
-12v 0.8A
Hope this helps, as my pc seems to be living with its case off a lot these days..haha

MSI K7N2 Delta-ILSR Nforce2

A friend on Mine is having problem with his setting up of MSI K7N2 Delta-ILSR Nforce2 mobo. Everthing is installed however, on powering up pc monitor goes into stand by, please note new windows Xp not installed on yet due to no screen cmos output. Any ideas , inorder to get screen working and beginiing installtion process of operating system.
Warmest regards,
PS bit late in UK so i cant come up with any suggestions to my PAL for possible solutions.
Thanks Again
Dr Goosey

What type of video card does he have, what bios is he running. Need details of his components. MOAN GUIDE

K7N2 Delta ILSR blown?

I have K7N2 Delta-ILSR.
I wanted to use the dolby digital out put of the board and since I didnt have a S-Bracket I decided to hook a wire onto the pin and connect that to a rca cable which goes to my decoder.
I used the board like this with no problems for about 10 months. But then the wire got moved and I think the board got shorted so it shutdown. This happened once before but the pc was fine.. This time the pc wont boot. I checked all the components and everything seems to be working including the power supply. The fans spin for a few seconds then it stops.
Whenever I plug in the power the Nforce 2 MCP-T gets really hot. you can barely touch it. So do you guys think I blew it for good and need a new board?

i have this board and i have done plenty of stupid things with it, it alway's seemed to live on with no problems, except once i cant remeber clearly though.
i did a ridiculus overclock from stable 199 to ~220 @ 1.8, tries to put it in safe mode nothing??, un hooked everthing and put it back together.. nothing, so i left it unplugged and without a battery for about two week, dident want to look at it as i though i f++ked it.
came back to it, put most of it together and it booted no problems in safe mode, dont know what happened but its still living now?

K7N2 Delta ILSR Takes forever to boot.

Specs:
K7N2 Delta ILSR Mobo
Athlon xp 2500
Kingston Hyper X 2700 DDR 512mb (its on the list)
Geforce 2MX 32mb AGP videocard (I dont play games)
3 Com 56k Win Modem
IBM GXP120 60 gig ata133 Hard drive
Pine 12X DVD drive
LG 24x10x48 CD Burner
Antec 300W power supply
The problem is that it takes forever to install and boot windows with faster processors for some reason. I origianlly built this system with my old Athlon 1.33 and it had these problems. I then tried a 900mhz athlon and it worked great, so I figured I damaged my 1.33 somehow. I ordered a 2500+ and a zalmann cpu cooler and now am back to where I was, when the system starts it seems very unstable and the screen goes blank for 10 minutes while its booting. It shows about 3 seconds of the starting windows screen then the screen will go blank for a while anf there will be no hard drive activity then it will come back about 10 minutes later and then boot. Sometimes the system will work fine then sometimes I cant even open my computer i just get the searching flashlight icon where my drives should be. I have updated to the lastet BIOS. Also while installing windows I get ocasional long pauses where it is doing nothing at all then it will just magically conitnue and do it in a fashion I would expect a machine of this speed to do.

Hmm not sure about the cable position on the CD drives, ill have to check that when I get home. All the jumpers are set correcly, and the hard drive is all by itself and its on the right connector. Thanks for the ideas, this problem is really killing me, I havent had these kind of hardware problems in years. The thing I dont get is why it works good with the 900mhz and not with the 1.33 or 2500+

NEED HELP - K7N2 Delta ILSR

I really need help. I recently bought my new moboard the K7N2 Delta ILSR and with it a GeForce FX 5600 256DDR, 512 DDD Ram PC3200, an 80Gb Seagate SATA HD, andi have a 2800+ AMD Athlon Xp Barton Core Cpu. The problem i get is that when i try to install Windows XP it says it cant find any hard drives. I saw the other thread that was like this but that one had about RAID so i thought i would ask again. I even tried it with Windows 98 which finds my hard drive and even installed once but after that i tried to upgrade to Windows Xp which didnt work, overwrited some of my Windows 98 files and so that didnt work either and when i try to install it again it gives me errors. PLS help im desperate to get my lan workin with my other PC. I havent changed any options in the bios and i dont know if i have to change anything to make sata work. I dont have a floppy disk either for the hd. I found it in the array thigy as well.

Windows will not find a SATA drive you have to tell it you have one bios will only find IDE drives.
you must hit ctrl F when the screen comes up during boot and creat an array just follow the on screen promps.
If you bought a OEM board and don't have the SATA Promise disk download it from MSI and a Manual too.
Either a Raid 0 or Raid 1.
It looks like you have only one drive so just tell it that and the array will work.
Than go to your Bois and set Bois to boot from CD first SCSI secound.
Now you can load your OS. When your OS starts to load it will flash a line across bottom of screen asking if you have SCSI hit F6 do so. The OS will keep loading but when its done it will ask for you 3.5 promise disk. Put it in and load the Fast Track 376 program.
When you OS is finished loading it will again ask for this disk as the first time it just loads the drivers to memory the secound time to your HDD.
Good Luck it a little confussing the first time as the programers think there talking to techs not people so use terms that sometimes don't make sense.

Someone plz help me with my k7n2 delta-ilsr

Hey everyone,
I just put my sytem togother and ran into a problem. I got the system to boot up just fine. It was not until I tried installing windows xp proffesional that I ran into problems. The installation process runs pretty smoothly, until the computer reboots to run windows for the first time. After it reboots the windows logo appears and the after 2 seconds or so, a blue screen appears saying that windows was shut down to prevent any damage to my computer. I have never encountered this problem before when I built other systems. The screen suggests that I should check my HDD's for viruses or check to see if they are configured correctly. The HDD's are SATA and I have them set up in RAID 0 mode and yeah I installed the RAID drivers during the installation process. Thinking that I had made mistake setting up the SATA drives, tried installing windows using a regular IDE hard drive and it gave the same message. I am stumped anybody have any ideas of what I might be doing wrong? Any help would be appreciated . My system specs are below.
MSI k7n2 delta-ilsr mobo
AMD 3000+ Athlon XP cpu (333 fsb)
ATI Raedon 9000 ( I know it's crappy , I'm still saving up for the ATI all in wonder 9800 )
x1 kingston 512mb pc3200 DIMM
x2 maxtor 80gb maxtor hdd's
x1 regular cd-rom drive
x1 floppy drive
420w raidmax psu
(+3.3v = 26A, +5v = 32A, +12v=13A)

Memory that comes with timing of 5 2 2 2 or 6 2 2 2 or usally winbond BH-5 memory chips. Ones with 5 3 2 2 or CH-5 winbond chips. The BH-5 chips overclock a little better than the CH-5. (Muskin uses BH-5 winbond in there black ram)
Winbond is no longer making BH-5 chips but is going to make a limited run of them as demend is high for them.
The first number shown here is the Traz and it controls the flush timing bench testing is showing that a higher number of 9, 10 or 11 or getting better bench results than the 6 or 5. Thats with Dual Channel memory.
The timing you show probly should be something like 8 3 3 3 or 8 3 3 2.5 unless it is there faster Dual channel ram.
The timing numbers can also appear like this 2 2 2 5 the high number is the Traz either way.
Look on your memory manufactor web site for the timing that if should run at also look at the voltage as this can make a big differance.

Internet Connection Problem on MSI K7N2-Delta-ILSR

Hi, recently I buy an MSI K7N2-Delta-ILSR.I have a problem when I was trying to connect to the Internet through my modem on WinXP Pro SP1. It bring me up an error message 678 ( The computer that was tried to connect did not respond...). I have also a second hard disk with Mel windows. On disk the disk with the Mel I don’t have any problem with the internet connection. All my settings are same on WInXP pro and Mel.I have checked I thousand times. My computer configuration is:
Athlon XP 2400+ Overclocked to 2205MHz
2 memory modules of 256MB 400 manufactured by Samsung
TharmalTake Volcano 11
Triplex Xabre 400 PRO with 128MB
Hercules Gamesurrround Fortissimo III 7.1
Microcom InPorte Home modem 56k
Leadtek winfast 2000 (TV/FM radio)
Acard SCSI controller (Acard AEC-6710D) for my scanner
WesternDigital WD800 GB
WesternDigital 15.3gb
Bios ver.7.4
Can anyone help me?

Quote
Originally posted by Roger Wilco
Hmmmmm, I\'m also having a problem with the onboard lan of the K7N2 Delta.
I have an ADSL connection, and have an Alcatel SpeedTouch Home modem.
I pretty much get the same error as SiliconMan (The computer that was tried to connect did not respond...)
I ended up giving up on it for the time being, just using my SMC NIC. Would be quite interested in finding out what the problem is though.
Anyone else in the same boat?
Hi,
Your problem is not the same, SiliconMan is trying to connect with a dial-up modem not LAN. Your problem sounds like it may be configuration, do a search on this post, I'm sure you will find people with onboard LAN troubles. It's hard to troubleshoot though since you didn't provide any info about your computer. Good Luck
Rob

Strange phantom restarts on MSI K7N2 Delta ILSR

Just wanted to see if I could get opinions on this. My MSI K7N2 Delta ILSR mobo runs real nice now, but still, on occasion, very rare and intermittently, it will just restart. Not likely a heat issue, as the temps are nice and low. Also, not just happenning when I'm playing a game or anything strenuous. Did it once while checking email, once during install of an MS Office program, and once during a game. Could it be my old Gforce 2 MX 200 video card, as the picture sometimes gets wavy (like fine waves on an ocean), and the old computer it was in did similar things, or is it common with this mobo.
MSI K7N2 Delta ILSR
Athlon XP 2500+ Barton
1026 MB Kingston DDR RAM (2x512 Dual)
Gforce 2 MX 200 AGP 4x
WD 60 GB 7200 RPM

I had errors on test 4 not 5 with Winbond 2-512 Dual Channel called Hardcore Cooling and they said that getting errors with memtest86 may not mean that the ram is defective, it may not be compatible with the memory comtrol and they had me RMA it back. I also was not able to run the ram stable at there advertized rate of 6 2 2 2 it was only stable at 8 3 3 2.5
I replaced it with OCZ after talking to there Tech support people about compatiblety problems with the Nvidia chipset. Sense I installed the OCZ I only had one ram reboot and when I checked I was running the voltage at 2.5 and OCZ said that I should be running at 2.6. They also said that I could run it up to 2.8 with no worry.
Look on manufactor web site to see what ram timing yours should be running at and what voltage, Auto setting in Bios is not always the best setting.
If it still not stable at manufactor spec than I'd talk to who ever you bought it from about replacing it or refund and buy something thats on the Nvidia compatible list.
Most ram manufactors have a list of motherboards that there ram will work on but sometimes the newer boards like K7N2 or not listed yet as still working that out.

Data corruption on MSI K7N2 Delta ILSR

Hi all,
Just got my new MSI K7N2 Delta ILSR up and running.
Got some issues with the memory running at 200mhz while the Barton core of my Athlon Xp 2600+ was running 166mhz, this had to be 1:1 (thx forum )
While running the default bios settings with cpu/mem at 166/166 fsb everything is stable as hell. I have been running Prime95 for 2 days now and using the system for dvd ripping/encoding, UT2004 gaming etc.
Then the overclocking began I'm using the standard AMD cooler that came with my boxed Xp2600+ so I didn't expect an FSB of 200mhz.
I stopped at an FSB of 190mhz...been crunching Prime95 for 18 hours now and again very stable.
Now comes the problem : Sometimes I get crc errors when installing a game or decrypting a dvd!! But how can this be? Prime95 is stable at this 190fsb overclock.
When using an FSB of 166mhz no data corruption or crc errors.
What can this be? It's not the cables because they're all the same as in my old setup which was running (ahum...walking) stable. PCI/AGP speeds are locked when overclocking...
Only thing I can think of is the power supply. I've read in a warning post from Bas that the Q-Tec 550w psu I have is crap. So my guess is PSU, but maybe it's something else I'm forgetting...Any suggestions??
The stupid thing is when I'm not overclocking I don't have the data corruption problems, but I'm still using the same crappy Q-Tec 550w PSU.
Help!
gr,
Remco

Hmmm, that's curious. On the MSI K7N2 Delta ILSR product page Kingston memory is recommended
Ok, did a Memtest86 v1.11 pass at cpu/dimm 166/166 - no problems whatsoever. I think using Prime95 would have revealed memory problems...but will do another pass with cpu/dimm at 190/190.
Can overclocking affect the Promise Raid Controller?? It should be locked like the PCI/AGP but who knows...
Well, I still have to replace my PSU but I'm not 100% sure that this is the problem. What PSU would you recommend? ...and I'm also thinking about replacing the standard CPU cooler, any advice is welcome
gr,
Remco

FLASH BIOS MSI K7N2 Delta-ILSR ????????

I am trying to flash the BIOS of my K7N2 Delta-ILSR board. I follwed all the instructions from the MSI Web but I can't get it going. I booted from Win ME & Win98 but could not get into C: drive. So I used Command Prompt from Window to get into the C: drive and follwed the Flash Bios Procedures. I keep getting the message: AwdFlash No Support WinNT/2000/XP OS
I got problem with the temp after I updated the BIOS. I wanted to flash it back to the old Bios. Please help me out
Thank you
My system:
WinXP Pro
MSI K7N2 Delta-ILSR
AMD 2500+
1 GB DR3200
Seagate 160 SATA

http://www.msi.com.tw/html/support/bios/note/ntfs.htm

MSI K7N2 Delta ILSR Memory problems

I'm trying to burn in a system in a 50 deg C (122 deg F) room for a minimum of 12 hours. The main system components are as follows:
Motherboard: MSI K7N2 Delta ILSR
CPU: AMD Athlon XP 2800+
Memory: 2x512 OCZ PC3200 EL
My problem is that the burn-in software continues to freeze up during the memory test. I've already contacted the software manufacturers and the software is stable. It's a problem with the way the motherboard handles the memory. I've tried putting the memory in dual channel configuration and changing the timing settings in the BIOS. The SPD settings are 2.5-3-3-7. Right now I have them at 3-4-3-8. It's a lot more stable than it was under the default settings but it still freezes up sometime after 7 hours. Unfortunately, I wasn't around when it froze so I don't know exactly how long it lasted. I can say that after 7 hours, it wasn't showing any slowdown in performance. If anyone could think of anything else I might be able to do to get the system stable, I would greatly appreciate it.

Thanks for the suggestions. The CPU FSB is 200, so it's already matched up there. And we have a ton of fans already. There are two in the front, 4 inside and 1 on the back. It's a custom case, 2u high. The power supply is oversized and more than adequate to provide the required power. I have four of these units running right now. Two with 2x512 sticks and two with 1x1024 sticks. For each combination, the memory clock speed for one is 166 and 200 for the other. I have been loosening up the memory timings trying to get the system stable, but it still isn't. If the power supply is good, and I'm unable to cool the system anymore due to limititions within the case, is there anything you can think of to stabilize the system. Maybe other settings in the BIOS or suggestions on how to go about getting good timings for the memory. Thanks.

MSI K7N2 Delta ILSR - RAID BIOS Option ???

hi ho,
i have my 2 storage devices pluged into the promise 376 onboard controller. they are not connected as a real raid (not mirror nor real stripe). my OS is win2k on the first sata device and everything was fine for a long time.
but now when my system boots, it detects the ide drives and then i see the irq board.
right after that the system stops and tells me 'disk boot failure'. so i don`t get the chance to configure my raidcontroller or my sata devices.
it is as the controller is deactivated. i remember a bios version where you could activate and deactivate the sata controller. but in my bios (right now it is v7.8) there is no such option.
i have tested so far:
- reset cmos
- flash bios v7.5 to 7.8
- disconnected sata drives
anyone with similar problems or any suggestion?
> MoBo : K7N2 Delta-ILSR Bios v7.8
> CPU : AMD Barton 2500+ (not overclocked)
> Ram : TwinMos 1GB 3200 400Mhz
> Sata : 2 x Maxtor 120GB Sata (as single Devices on Raid-Controller)
> Ide : 60GB IBM DeckStar
> Gra : ATI 9600 pro 128MB
> Aud : SB Audigy 2 ZS
> Pow : SilverPower 350W, +3,3V/+5V@25A and 12V@18A
> OS : win 2000 SP4 + Security Updates 31.07.04 + DirectX 9.0c

watch the bottom of the screen after pressing Enter on the "Welcome to Setup" screen. There will be some moments of files being loaded, and then you should see a message appear which says "Press F6 if you need to install a 3rd party SCSI or RAID driver". This message will only stay on the screen for a couple of seconds, so press F6 as soon as you see it appear. After this is done, you will see other messages appear, and it will act as though nothing is happening, but eventually a screen will appear which will allow you to install the drivers for the sata controller.
specify a device press S, select "win 2000 promise fasttrak 376 controller" it will read floppy and load, dot not remove floppy yet, continue win2000 install it may nead to access floppy to finish installing raid driver, did you do it like this.
try making some floppy boot disks and boot to floppy instead of cd.
http://freepctech.com/pc/002/files010.shtml
when you say there not listed, where did you see this? they wont be listed, windows will search for fasttrak controller so it will see sata's conected to it with out you knowing, so long as you load the controller from floppy that came with mobo as above.

I cant get my K7n2 Delt-ILSR to see my single WD sata drive.

Similar Messages

Maybe you are looking for