I cant get my mac to recognise the internal dvd drive on my imac

my mac is running hot to the touch and i cant get the imac to recognise any dvd i put in

Well, it installed in 10.5 here...
I won't be able to try 10.4 until later, but you might try another download...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=uk&dlc=en&sw _lang=&product=3811337#N638
Have you ever used Mozy?
Might try Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Then try to install.

Similar Messages

  • 'Unknown Error 0x3' when writing with the internal DVD drive

    I use Toast to burn DVD's and have been getting a lot of harware failures with a '0x3' error code. Burning the same content to an external Firewire DVD drive works perfectly. Anyone else seeing this? I've only had this machine a few months and would hate the think the drive has died already. I have the extended Warranty so no problem there, but I'd rather not have my computer out of service while Apple works on it.
    Anyone serviced their own iMac with Apple supplied replacement parts? I've done my own service on desktops for many years, but I don't know if the iMac internals are such that things like drive replacement can be done easily (i.e. can you just open the case an pop the drive out, or do you need to tear the whole machine apart to get to it?).
     20" Intel iMac (2.0GB RAM, 500GB HD + 1.5TB external, 20" Cineama Display)   Mac OS X (10.4.7)   All tools, no talent!

    Hi,
    please apply the note 1614788. After note implementation, you need to set parameter RSR_HIER_THRESHOLD_EXPORTDB in table RSADMIN via report SAP_RSADMIN_MAINTAIN in transaction SE38.
    If you set this parameter to value 50.000 for example, all hierarchies with more than 50.000 nodes will be buffered in the database instead of using the export/import buffer.
    To find out the current size of a hierarchy, goto the hierarchy maintenance in transaction RSH1 and copy the hierarchie ID from the header data. With this key you can goto transaction SE16 and select table RSRHIEDIR_OLAP (Field HIEID is the hierarchy ID).
    It should resolved your issue.
    Thanks,
    Venkat

  • Is it necessary to disable the internal DVD drive to connect an external DVD drive?

    Isit necssary to disable an internal DVDdriver to use an external DVD driver?  I have permanently jammed a CD into an iMac (mid 2007) DVD / CD drive and purchased an external LG Mac compatable (at the apple reps advice), but the external is not recognized by my iMac.  therefore, does the internal drive have to be disabled, and if so, can it be disabled without taking the machine apart?
    Thanks
    Ed Lynch

    Are you still running Leopard as indicated in your profile?
    If so, up until Snow leopard (if I remember correctly) there was a patch needed for the OS to recognize an external - my LaCie burner came with it and once I installed it, it worked great. As mentioned though, it still wouldn't show up until you insert a disk. At this point, I doubt that such a patch would still be available as it hasn't been needed for some time.

  • How can I get my Mac to recognise the í on my keyboard?

    Hi,
    I am trying to install a Hungarian Keyboard but there is no option for an extra key next to the left shift button. My mum wants to use the keyboard so I need all the corresponding keys to type what it says. When I plug the keyboard in it says "unknown keyboard please press the unidentified key left of the left shift button" this key is the hungarian letter í. I check the input sources and there is no option for a hungarian keyboard with the í key next to the left shift button. if i select the normal key when I press the button, I get 0 and when I press the 0 I get í. Is there a way to set up your own keyboard form scratch or do I have to use the inbuilt mac keyboard layouts?
    Thank you.

    If you open your 'system preferences', then click on the 'keyboard' option, then the 'input sources' tab you can then add new keyboards by clicking on the plus button at the bottom of the window. You will then be presented with a drop down list of keyboard layouts.

  • I cant get my Mac To install the driver for My Hp deskjet F2480

    When i try to install it it goes thru half way the setup and that when i try to install it doesnt do anything.
    Heres a Photo of what i mean
    http://yfrog.com/na38822895p
    If that link doesnt work try this link it is that same 1
    http://img838.imageshack.us/i/38822895.png/
    Does anyone know how to fix this problem?

    Well, it installed in 10.5 here...
    I won't be able to try 10.4 until later, but you might try another download...
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=uk&dlc=en&sw _lang=&product=3811337#N638
    Have you ever used Mozy?
    Might try Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Then try to install.

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

  • Do macs use the worst dvd drives???

    this is just a question because i have noticed that a lot of DVDs that i burn on my mac play in my home DVD player, through my lacie external DVD drive and/or my friends PC work perfectly but they wont play in my iMac G5 or my MacBook Pro DVD player.
    PS. the DVDs that i use are verbatim 99% of the time. and a lot of the problems are with dual layer DVDs.
    PSS. please dont confuse my question with "macs DO use the worst DVD drives" as a statement. i do not mean it that way at all. thank you.

    Hi,
    It's a bit long story, page #39 of the following document shows you all:
     http://h10032.www1.hp.com/ctg/Manual/c01659847.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I get Maverisks to recognize internal DVD drive?

    The latest macOS, Maverisks, usually does not recognize a DVD disk that is inserted in the internal DVD drive. Is there way to solve this?

    Place cd/dvd in drive.  cd/dvd icon will show on desktop.
    How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.
    What is ude?
    How is it connected?  firewire or usb?
    When connected it should appear in system profiler.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    look for firewire or usb.
    Robert

  • Replacing Internal DVD Drive with HDD in Mac Mini?

    Has anyone tried replacing the internal DVD drive with a hard drive, giving you TWO internal hard drives? I think you need a cable to match up the SATA connectors. Then you could use a USB external enclosure for the DVD.
    Thanks.

    Very interesting, thanks el Duque. Too bad MCE doesn't make a carrier for the Mac Mini. I wonder if one for a Macbook Pro can be easily modified to fit?
    I have just learned that the SATA connector on the logic board for the optical drive in Macbooks and the Mini is called a "Slim-SATA" connector. Instead of the power side of the connector having 15 pins, it only has 6, with both types of connectors having a standard 7-pin data side. Both power and data hook-ups are achieved in a single connector -- a power side and data side.
    Since the ports on 2.5" hard drives are "standard" SATA connectors, AND they don't match up to the logic board's connector location (like with the connector location on the optical drive), a cable is needed to run between the HDD and the logic board connector.
    Unfortunately, such a cable is not available -- yet. Instead, one has to be fabricated out of two types of SATA cables -- a Molex 4-pin to SATA 15-pin power cable and a combination cable that looks like this:
    http://www.byteccusa.com/product/SATA/SATA-XP118/SATA-XP118.htm
    The fabrication involves replacing the molex 4-pin power end of the combi-cable with the SATA power end of the molex 4-pin to SATA power cable (cutting and soldering). The BIG question now is whether a HDD will work with just the two-wire power cable (of the combi-Sata cable) that an optical drive normally uses? Anyone know if it will? Thanks.

  • How can I get a replacement internal DVD drive?

    I bought a refurbished Toshiba P55t-A5202 a few months ago.  The internal DVD drive seems to be failing and doesn't always recognize dual-layer DVDs.  Some DVDs recognize and play fine.  Others aren't even detected and the system thinks no disk is in the drive.  I would like to replace the opical drive.  I am comforable opening up the sytem and swapping the drive, I just don't know where to buy the replacement part.  
    Does anyone know who to contact about getting a replacement internal DVD drive?

    Hi, and welcome to Apple Support Communities.
    Which exact iBook model is it?
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Apple may not have the replacement discs at this point, but it's worth a try. You could try giving Apple a call and see if they have them available. If they do, they will send them to you for a fee.
    You will need the serial number of the iBook when you call.
    http://support.apple.com/kb/TA27282?viewlocale=en_US
    Good luck.

  • I cant get my mac out of recovery mode and the disk got deleted

    i cant get my mac out of recovery mode becuase the disk got deleted and i didnt back it up from time machine

    This should work -- at least to get you booted.
    http://support.apple.com/kb/PH13871

  • I have an app in my app store that is requiring an update but I never purchased the app and when I click update, another apple ID pops up that is not mine.  Now i keep getting reminders to update the app and I cant get rid of it from the app store.  Help.

    I have an app in my app store that is requiring an update but I never purchased the app and when I click update, another apple ID pops up that is not mine.  Now i keep getting reminders to update the app and I cant get rid of it from the app store.  Help.

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
    Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard (command-C).
    In the Finder, press the key combination command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select  Other...
    A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
    Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
    The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
    Log out and log back in. Test.

  • I cant get my Mac Book to connect to my Apple tv

    I cant get my Mac Book to connect to my Apple TV.  My Ipad and Ipone connect just fine.
    The Icon that should be at the top of my desktop is not there and the Apple tv mirrioring option in the Display system pref is not avalible
    Any sugestions would be great.

    If you´ve already verified if your Mac is able to connect to Airplay (note, Mountain Lion is not the point, but your Hardware is)
    try to note this?
    1. both are connected through the same wifi?
    2. you´ve entered the Apple TV with the same Home Sharing (Apple ID) active?
    * I mean, both Mac and Apple TV must be configured with the same Apple ID, and Home Sharing should be turned on in your iTunes.

  • My mac stopped recognising the wireless keyboard

    My mac stopped recognising the wireless keyboard and now I cannot sign-in to check the settings. Batteries are good and green light comes on but it will not operate the mac so I cannot get past the sign-on screen. Help !

    Yeah it happens with my iPad too sometimes, I just turn the bluetooth off on my ipad so that i can let my iMac Connect to it first...for some strange reason it seems that the iPad has precident over the iMac lol

  • Does anyone know if there is a way to arrange songs on a playlist that has 100 songs? I used to be alble to double click and open a new page but that is no longer an option. Because you cant get a total view of the playlist it is almost impossible

    I used to be alble to double click and open a new page but that is no longer an option. Because you cant get a total view of the playlist it is almost impossible.. if a song is in position 95 and I want to put it at 3 I have to hold it and drag it till the curor moves.. This makes creating an order almnost impossible because you cn only see half of the songs

    1.SmartyPanouZe3rd,
    Sep 4, 2013 1:03 PM   in reply to SmartyPanouZe3rd
    This is a follow-up to the above question I had.
    Since i noticed people looking at the question, but no replies showing up, i contacted BC support directly with the same question.
    I got a reply.
    I did tests based on the reply.
    Here is what is going on based on the reply.
    (spoiler alert : It works... but it's not yet a perfect score.)
    All the details are posted here :
    http://www.animavdo.com/mut/ambiguity-001.html
    Hope this can help others.
    Cheers.
    PS  I still will use DW for the heavy lifting...
           But MUSE is nice for quickly putting together a mini website.
           Highly recommended App.

Maybe you are looking for

  • View display error while creating a request

    hi iam getting the follwing error Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. invalid call interface for Teradata, please use ODBC35 as c

  • Com.sapportals.km.explorer-search iview can't run.

    Hi , After we upgrade KMC SP2 from Patch Level 4 hotfix 3 to Patch Level 5 hotfix 4, the iview sap.sapportals.km.explorer-search can't run. Our EP version is EP SP2 Patch 41, J2EE Engine is SP41, Java library is version 20. ============== The error m

  • Best way to convert Exchange 2010 Physical to Virtual (esxi 5.1)

    Hello, I've been doing a bit of research on best practices for Exchange 2010 in VMware and I am pretty sure at this point my hardware and vmware config is going to be able to handle it.  What to people recommend for moving exchange 2010 off a physica

  • SQL Join help required!

    Hi all I need help with a join. If you click the image link below, I need to find a way to join table 1 and table 2 to get table3: http://img229.imageshack.us/img229/1401/83192078uq8.jpg Help would be very much appreciated! Thanks in advance.

  • Play cd audio labview

    Bonjour, J'ai trouvé sur le forum un VI permettant de lire les pistes d'un CD audio avec LabView et ça fonctionne très bien (merci à son auteur). Cependant, j'aimerais aussi avoir comment récupérer des informations sur la lecture en cours, notamment