I CANT GET MY NANO OUT OF DISK MODE!!!!

i accidentaly put my ipod into disk mode and now i cant get it out. I tried turning it off but it doesnt do anything
no clue   Windows XP  
no clue   Windows XP  

I am having the same problem - IPOD Nano gets stuck in Disk Mode. It won't respond to Reset, just stays locked up. The restore works, but this is the third restore I had to do this week. Am I doing something wrong, or is the IPOD defective?
Or is this a bug with the IPOD Nano software, as I see there are a lot of these posts, but reset seems to help many.

Similar Messages

  • How do i get my nano out of disk mode

    Hey my nano says disk mode ok disconnect i want to get ut odf this so i can listen to my music and answers?
    Casey

    Click the eject icon in the source list, next to your iPod. To turn it off permanently, go to iPod preferences and uncheck "Enable Disk Mode".

  • I cant get my mac out of recovery mode and the disk got deleted

    i cant get my mac out of recovery mode becuase the disk got deleted and i didnt back it up from time machine

    This should work -- at least to get you booted.
    http://support.apple.com/kb/PH13871

  • Can't get my ipod out of Disk Mode

    My iPod froze and was not being recognized by my computer. I got it into Disk Mode and now the computer is recognizing it but I can't get it out of disk mode.
    Any suggestions?
    Thanks!!!

    Reset it (hold down the menu and center button for 6 seconds)

  • I cant get my phone out of lost mode

    i accidentally put my iphone in lost mode and cant get it out of it

    Read http://support.apple.com/kb/PH2700

  • I cant get my phone out of restore mode i try to restore and it lacks just a little before completing and it gives me an error message what can i do?

    How can i get my ipnone out of restore when its almost done restoring i get an error message?

    How would you expect us to give you intelligent answers if you don't give us more details including the error message?

  • TS3681 I cant get my iphone4 out of recovery mode? Have tried everything please help

    I was charging my phone overnight but his morning I aawoke to it being in recovery mode and I have tried all morning to get it out but after several attempts threw itunes it stops and claims I have come across and error 1 still cant fix the problem and need help

    That is typically indicates a hardware failure.
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Resolve specific iTunes update and restore errors - Support - Apple

  • I cant get my ipad2 out of recovery mode

    I have hooked up to itunes countless times and keep getting the same error codes 11 or 12. It started when I got the notification to update and so I clicked to update and let it run its course, it rebooted and gave me the connect to itunes screen. I was so excited to become apart of the apple family and now because of this I have slowly traded in all my apple products for Androids. I have nothing nice to say except the simplicity of the platform on apples were amazing but now having this experience with my ipad2 I will not switch back. If I can't get this ipad2 to get back running again I will continue to let others know how stupid apple products are. I dont plan on sending it in for service because it'll cost more than I paid for it. #RollingWithHonesty

    Did you check here to see if any of these suggestions will work for you?
    Resolve iOS update and restore errors - Apple Support

  • TS1538 i cant get my phone out of recovery mode even after hooking up to itunes

    my phone had an update and i need help cause it wont come out of recovery mode

    Why not? What happens when you plug it into your computer and attempt to restore it with iTunes?

  • IPod Nano stuck in DISK MODE - HELP!

    How do I get my iPod Nano out of DISK MODE?
    When I went to turn it on it was in DISK MODE. How did it get set to DISK MODE?
    Thank you.

    Thank you, it worked just fine. I guess Apple has replaced operating instructions for these forums! Again, thanks for the help.

  • I cant get my cd out of my mac pro book

    I cant get a cd out of my mac please help I have tryed all the ejects and holding down and restarting ?

    Solutions
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disk Utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    Restart the computer while holding down Command-Option-O-F, to enter the Open Firmware prompt. Type "eject cd" without the quotes, and press return. The disk ought to eject. To start into OS X, type "mac-boot" without the quotes. Press return, and the computer will continue with the startup. (This will not work on an Intel Mac. There is no Open Firmware on Intel Macs. )
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.

  • Cant figure out what "disk mode" is

    PLEASE HELP!!!! my ipod is saying "disk mode" on the screen and ive done everything to try to fix it but its locked up. why is it doing this and what does it mean??

    Disk Mode is useful for troubleshooting problems.
    Reset it get it out of disk mode...
    Resetting Your iPod
    btabz

  • My Apple Thunderbolt Display/Apple Cinema Display is in Disk Mode. How do I get it out of Disk Mode?

    I am Leo and I am 6 years old. Me and Mommy went to the Apple Store in King Of Prussia Mall for 2 Hours. And I put an Apple Thunderbolt Display/Apple Cinema Display in Disk Mode. How do you get an Apple Thunderbolt Display/Apple Cinema Display out of Disk Mode?

    Power down by holding the power button until it shuts off.

  • Re: 3rd gen ipod wont get out of disk mode

    Hi,
    Iam going insane..had this problem for weeks now, when the ipod connects to the mac (tiger) it wants to change to disk mode all the time..it connects using firewire and the dock.
    I have managed to wipe it using the disk utility, and re-install ver 2.3..but it still remains in disk mode, and yes i have tried numerous times the reset technique!, it just shows the apple logo then the dreaded folder with exclamation mark!!..the even stranger thing is, the only time it comes out of disk mode is when i plug the "car charger" into it, but only when the charge has reached a certain level!!!.. it seems iam doomed to using disk mode when connecting to my mac, then running out to the car and plugging it in to change over drom disk mode!! aaaarrrrgggghhhhh!!!!
    HELP!!!!

    Hi Richard,
    The big problem is that it only seems to be in ipod mode when it feels like it!, it will sit in disk mode when connected to the mac, then i eject it and you would expect to see the ipod mode fire up and the main menu appear, but instead it shows the folder and exclamation mark, then it begins the resetting loop! and gets very warm (not good!)... but the only time ive had it in ipod mode was when i connected it to my car charger last week, after totally draining the thing!., but when i came to update it with itunes, it sat there comfortably for about 5 mins, then froze and reverted back into disk mode / exclamation folder!!?!?
    Any help is appreciated

  • HT4623 how do i get my phone out of recovery mode without restoring it. I have nothing backed up to icloud and i really cant lose all of my data!

    how do i get my phone out of recovery mode without restoring it. I have an iphone 4. i have nothing backed up to icloud and i really cant lose all of my data

    You don't. Once it's in recovery mode, anything that was on the phone is already gone.

Maybe you are looking for

  • ITunes no longer shows my iPod classic.  do I show it in iTunes and manage it?

    I have just upgraded to Yosemite and the latest iTunes. But my iPod Classic is no longer visible in iTunes

  • VNICs Templates With 2.1(1b)

    After upgrading to 2.1(1b) I noticed a new entry when creating your dynamic vNIC's/templates (see attached pic). How is this different from the previous implementation of the firmware? Thanks

  • Sending UTF-8 data via http post

    Hello, I'm generating an xml to be sent via http post method. Before sending, I'd like to convert it to utf-8, but Oracle converts it to utf-16, no matter what I do. This is what I send with utl_http.write_text:    convert(l_clob,'AL32UTF8')...but I

  • SATA controller card - will it work?

    I need to grow my RAID5 but have run out of SATA ports on my motherboard, so I am considering buying a [url=]Lycom PE-103R5[/url] which is a PCI-Express 1x card based around the Silicon Image SiI3132. The sales spiel claims that it is supported in 32

  • AirPlay to multiple atv's at once??

    I have some simple video content (Keynote presentation) thank I need to display from a MBP or iPad to several projectors at once. Rather than dragging hundreds of feet of cable plus dealing with video splitters, it would be nice to use project/mirror